Samsung Dryer DVG41A3000W Parts
Genuine Samsung part
By: Samsung
Part Number: 6602-001655
Drives drum rotation for even drying. Replace if dryer won't spin, makes squealing sounds, or clothes stay wet. Confirm fit with your model number.
Do-It-Yourself Stories from Customers like You
The idler wheel bearings were shot and the dryer was making high pitch squeaks because of it Douglas S. • Kennesaw , GA • March 06, 2016
From watching the video I got the general idea, disassemble 50% of the dryer. Only had 2 differences in my dryer from the one used in the video, so the video was helpful. The one difference was the connections to the front side of the dryer were on the power distribution circuit board located on the left of the dryer under a sheet metal cover. These were harder to disconnect with my fat thumbs. The bigger issue was with removing the front control panel. In the video there doesn't appear to be...
Read more
More
$54.66
- Compare At:
-
$65.05
- You Save:
-
$10.39
Genuine Samsung part
By: Samsung
Part Number: DC32-00007A
Dryer not heating or drying inconsistently? A faulty thermistor causes temperature control issues. Direct repair—moderate difficulty, 30-45 minutes.
This part fixes the following symptoms
-
Takes too long to dry
-
Doesn't shut off
See more...
Do-It-Yourself Stories from Customers like You
Samsung dryer model# DV42H5200EW would not heat no error codes otherwise operating normally. James S. • Washington , DC • October 20, 2017
You can do this!
Although an Art Director by trade, I like working with my hands. I’m adept at working with tools and following instructions. In today’s disposable society, I prefer fixing things. That said, this has to be the easiest repair I’ve ever attempted with the largest cost-savings versus hiring a professional.
My brand new dryer had been in use fewer than six months (average 6 loads per week) when suddenly the dryer would not heat. The drum would spin, there were no error codes, and...
Read more
More
$30.54
- Compare At:
-
$36.34
- You Save:
-
$5.80
Genuine Samsung part
By: Samsung
Part Number: DC93-00634A
Maintains belt tension in your dryer drum system. Replace if the pulley wheel is worn, cracked, seized, or the tensioner arm is bent or broken.
Do-It-Yourself Stories from Customers like You
The idler wheel bearings were shot and the dryer was making high pitch squeaks because of it Douglas S. • Kennesaw , GA • March 06, 2016
From watching the video I got the general idea, disassemble 50% of the dryer. Only had 2 differences in my dryer from the one used in the video, so the video was helpful. The one difference was the connections to the front side of the dryer were on the power distribution circuit board located on the left of the dryer under a sheet metal cover. These were harder to disconnect with my fat thumbs. The bigger issue was with removing the front control panel. In the video there doesn't appear to be...
Read more
More
$60.95
- Compare At:
-
$71.92
- You Save:
-
$10.97
Genuine Samsung part
By: Samsung
Part Number: DC47-00016A
This thermal fuse is a safety device mounted on or near the blower housing inside the dryer. It is designed to blow and cut power to the dryer if the internal temperature exceeds a safe limit, preventing potential fire hazards. Replace this fuse if the dryer will not start or has no power at all - a blown thermal fuse is one of the most common reasons a dryer stops running completely.
Do-It-Yourself Stories from Customers like You
Samsung dryer model# DV42H5200EW would not heat no error codes otherwise operating normally. James S. • Washington , DC • October 20, 2017
You can do this!
Although an Art Director by trade, I like working with my hands. I’m adept at working with tools and following instructions. In today’s disposable society, I prefer fixing things. That said, this has to be the easiest repair I’ve ever attempted with the largest cost-savings versus hiring a professional.
My brand new dryer had been in use fewer than six months (average 6 loads per week) when suddenly the dryer would not heat. The drum would spin, there were no error codes, and...
Read more
More
$28.31
- Compare At:
-
$33.69
- You Save:
-
$5.38
Genuine Samsung part
By: Samsung
Part Number: DC61-02627A
The Dryer Moisture Sensor is a reliable component designed to ensure your dryer operates efficiently. This genuine OEM part accurately detects moisture levels in your laundry, allowing the dryer to adjust drying times automatically. By maintaining optimal moisture sensing, it helps prevent over-drying and energy waste, ultimately saving you time and reducing utility costs. Compatible with a wide range of Samsung dryer models, the Dryer Moisture Sensor guarantees a perfect fit and seamless integration into your appliance. Installing this sensor can restore your dryer's performance, ensuring your clothes are perfectly dried every cycle. Trust in this genuine OEM part to enhance the functionality and longevity of your Samsung dryer, providing you with dependable and efficient drying results.
This part fixes the following symptoms
-
Takes too long to dry
-
Doesn't shut off
See more...
Do-It-Yourself Stories from Customers like You
Ran for 5 to 7 seconds and stopped. Paul K. • Dayton , TX • November 04, 2017
I researched the issue on You tube and found out it could be either the "belt broke switch" or the Moisture sensor. A friend who was an appliance mechanic advised "since you have to take it all apart anyways, its best to replace the belt, spring, and Idler wheel" I bought the 5 item for $52. I watched the video on the AppliancePartsPros for changing out the belt and I replace all items on the list. Took 1 1/2 hrs and was fixed on restart!! * Wear gloves, the sheet metal is very sharp edges!*
Read more
More
$13.95
- Compare At:
-
$16.74
- You Save:
-
$2.79
Genuine Samsung part
By: Samsung
Part Number: DC61-01215B
Maintains tension on the idler pulley to keep the drum belt tight. Replace if the spring is stretched, broken, or missing to restore proper belt operation.
Do-It-Yourself Stories from Customers like You
The idler wheel bearings were shot and the dryer was making high pitch squeaks because of it Douglas S. • Kennesaw , GA • March 06, 2016
From watching the video I got the general idea, disassemble 50% of the dryer. Only had 2 differences in my dryer from the one used in the video, so the video was helpful. The one difference was the connections to the front side of the dryer were on the power distribution circuit board located on the left of the dryer under a sheet metal cover. These were harder to disconnect with my fat thumbs. The bigger issue was with removing the front control panel. In the video there doesn't appear to be...
Read more
More
$13.95
- Compare At:
-
$16.74
- You Save:
-
$2.79
Genuine Samsung part
By: Samsung
Part Number: DC61-02610A
Securely houses your dryer's lint filter to prevent buildup and reduce fire hazards. Replace when the case cracks or breaks. Verify fit with your model.
Do-It-Yourself Stories from Customers like You
The case filter broke where it connected to the dryer filter Agnes S. • Bluffton , SC • July 29, 2016
Easy! Took the old case filter off and put the new case filter on. Two clicks and it was done!
I would also like to say how great it was to deal with this company, easy ordering, best price, and fast delivery. Keep up the great work.
Read more
More
$30.95
- Compare At:
-
$36.52
- You Save:
-
$5.57
Genuine Samsung part
By: Samsung
Part Number: DC31-00055G
Motor hums but won't start? Replace your dryer drive motor to fix startup failure. Moderate DIY repair with video guide. Restores drum rotation.
Do-It-Yourself Stories from Customers like You
Dryer motor Dave B. • Worton , MD • April 19, 2016
After watching the how to video twice I decided to embark on dismantling my dryer and attempting to replace my motor. After realizing that the main tool needed was a Phillips screwdriver I was sure I could handle this repair. One by one I took apart the dryer and spread out the parts throughout my mud room. 1.5 hrs later and I have a working dryer, and most of all a happy wife. Thanks for the speedy part delivery and the great how to video.
Read more
More
$296.95
- Compare At:
-
$350.40
- You Save:
-
$53.45
Genuine Samsung part
By: Samsung
Part Number: DC64-00828B
Dryer won't start or keeps running with door open? The door switch detects door position for safe operation. DIY-friendly repair with video guide.
Do-It-Yourself Stories from Customers like You
I accidentally stepped on the door of my Samsung dryer. The door is intact but brackets bent. Margaret C. • Tampa , FL • June 07, 2018
I am so blessed. I went online. Found the brackets. Watch the video for the brackets I chose. And lucky me. I did not have to pull the dishwasher out. The installer did not have it flush under the counter. So I was able to pull the dishwasher forward unhook the damage brackets and insert the new. Put the dishwasher back in. Two screws. Now the balanced and secure dishwasher washes better than ever and I did not have to pay an extraordinary fee for a repairman. I'm 68 and take care of a 72 year...
Read more
More
$50.76
- Compare At:
-
$60.40
- You Save:
-
$9.64
Genuine Samsung part
By: Samsung
Part Number: DC67-00180B
Fix loud grinding or squealing noises from a broken blower wheel. Restores proper airflow in your dryer. DIY-friendly repair, typically 30 minutes.
This part fixes the following symptoms
-
Too hot
-
Takes too long to dry
-
Doesn't shut off
See more...
Do-It-Yourself Stories from Customers like You
Dryer was making loud rubbing noise Jennifer D. • Milton , GA • August 15, 2016
Did google search and found youtube diagnostic and repair video. Blower wheel was warped and rubbing on the cover. We ordered a new blower wheel and followed youtube instructions to install new blower wheel.
Read more
More
$120.95
- Compare At:
-
$143.93
- You Save:
-
$22.98
Genuine Samsung part
By: Samsung
Part Number: DC97-16742B
Replaces broken or cracked lint filter housing on Samsung dryers. Guides airflow through lint screen for efficient drying. Confirm fit with your model.
Do-It-Yourself Stories from Customers like You
Broken lint screen cover Neal M. • Aliso Viejo , CA • June 21, 2014
The repair was very easy, obviously. What impressed me was prompt shipment and arrival of the part; it was ordered on Sunday night and arrived Tuesday afternoon.
Read more
More
$159.45
- Compare At:
-
$168.95
- You Save:
-
$9.50
Genuine Samsung part
By: Samsung
Part Number: DC47-00017A
Dryer won't heat or stops heating mid-cycle? The high limit thermostat cuts power when temperatures spike. Easy 15-minute fix with video guide.
Do-It-Yourself Stories from Customers like You
My dryer would not heat up Chris R. • Glen Saint Mary , FL • January 07, 2015
When starting my dryer the motor would power up and rotoe the drum and blower. Afetr about 20-30 seconds the igniter would come on then the gas valve would open and I would get heat for about 6 or 7 seconds then it would shut off. I know the burner is suppoed to cycle on and off but once the burner shut off it would not come bqack on unless I shut the dryer off and then back on. I checked for continuity on the thermistor, the thermal fuse and the high temp sensor. All three of them appeared to...
Read more
More
$82.47
- Compare At:
-
$98.14
- You Save:
-
$15.67
Genuine Samsung part
By: Samsung
Part Number: DC47-00022A
Dryer not heating? The igniter lights the gas burner to generate heat. This fragile ceramic part can crack or break during installation. DIY repair.
Do-It-Yourself Stories from Customers like You
Samsung dryer model dv395gtpasu/a1 operation as normal but without heat Khanh T. • Fountain Valley , CA • May 09, 2016
Replaced the following parts but did not fix the problem:
-Thermister
-Thermal fuse
-Radiant sensor
-Ignitor
-Therm
The problem was the Centrifugal switch. Took the switch apart and use fine grid sand paper to clean the contacts. Put it back and working.
Read more
More
$172.95
- Compare At:
-
$207.54
- You Save:
-
$34.59
Genuine Samsung part
By: Samsung
Part Number: DC62-00344A
The Dryer Air Seal is an essential component for maintaining the efficiency and performance of your Samsung dryer. Crafted from high-quality TPE material in a durable gray color, this seal ensures a tight and reliable closure for your dryer's door. By effectively preventing air leaks, the Dryer Air Seal helps maintain optimal drying temperatures, leading to faster drying times and reduced energy consumption. This genuine OEM part is specifically designed to fit a variety of Samsung dryer models, guaranteeing a perfect match and seamless installation. Whether your original seal is worn out, cracked, or missing, replacing it with the Dryer Air Seal will restore your dryer's functionality and prolong its lifespan. Investing in this high-quality air seal not only enhances the performance of your appliance but also contributes to a more efficient and cost-effective laundry routine. Trust in a genuine OEM part to provide reliable protection and ensure your Samsung dryer operates at its best.
Do-It-Yourself Stories from Customers like You
Gasket on dryer door needed replacement. Armond M. • Goodyear , AZ • March 07, 2020
SIMPLE. I TOOK THE OLD ONE OFF AND REPLACED IT WITH THE NEW ONE.
Read more
More
$57.75
- Compare At:
-
$85.28
- You Save:
-
$27.53
Genuine Samsung part
By: Samsung
Part Number: DC61-03128A
Replacement leveling leg for dryers. Installs on the bottom corner to stabilize and level your unit. Needed when legs are missing, damaged, or broken.
Do-It-Yourself Stories from Customers like You
Broken foot William R. • Bethpage , NY • March 20, 2018
Replaced adjustable foot with a new one.
Read more
More
$19.95
- Compare At:
-
$23.94
- You Save:
-
$3.99
Genuine Samsung part
By: Samsung
Part Number: 6002-000213
The Refrigerator Screw-Tapping is an essential component for maintaining your Samsung refrigerator's functionality. This genuine OEM part ensures precise threading, allowing screws to be securely fastened without damaging the surrounding materials. Designed specifically for Samsung refrigerators, it guarantees a perfect fit and reliable performance. Whether you are replacing a damaged screw-tapping or performing a repair, this Refrigerator Screw-Tapping simplifies the process, saving you time and effort. Its high-quality construction provides durability and long-lasting support for your appliance. By choosing the Refrigerator Screw-Tapping , you ensure your refrigerator remains sturdy and functional, enhancing its overall lifespan. This genuine OEM part is easy to install and seamlessly integrates with your existing setup, making it an ideal choice for DIY repairs. Trust in the quality and compatibility of this Samsung part to keep your refrigerator operating smoothly and efficiently.
Do-It-Yourself Stories from Customers like You
Dryer would not start. John K. • Lawrenceville , GA • November 03, 2017
The start button had been tricky to use. You had to push it in just a certain way to get the dryer to start. Eventually it was non-responsive. All other controls worked and there was no error code displayed. The repair was to replace the whole control board which cost around $100. Heavy sigh..
Be sure to keep track of all your screws.
BTW it was not the thermal fuse. All the online videos say this is the first thing to look for when the dryer will not start. Be sure to check with the person...
Read more
More
$6.41
- Compare At:
-
$7.56
- You Save:
-
$1.15