Poulan Chainsaw Parts

This genuine Echo starter handle can be used as a replacement part for chainsaws, leaf blowers, leaf vacuums, and string trimmers. The function of a starter handle for one of these types of small engine appliances is to use in conjunction with a starter cord to power up the engine. It is meant for walk-behind appliances that are powered up by recoil starters.A starter handle might need to be replaced if it can no longer turn on the engine in conjunction with the starter rope. If the rope has permanently detached from the starter handle in a way that cannot be simply repaired or if parts of the handle have been damaged or have fallen off, the starter handle must be replaced with this genuine OEM part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This starter handle is compatible with the following brands: Husqvarna, Poulan, Weed Eater, and Paramount.

This replacement part is a starter pulley. It is a genuine replacement part made by Husqvarna. These types of pulleys are commonly responsible for making sure that two different parts are working together. These two parts usually require a rotating or turning motion. The pulley is situated so that they are able to work together when the appliance is in use to help operate the engine.A new starter pulley might be needed if the turning or rotating motion inside the engine is not working properly. This can be because the pulley is broken or damaged in some way and not able to provide the motion for linkage of the parts. Because this part is situated near the engine, be sure the appliance is cooled off before attempting this repair.This pulley is sold individually and is a genuine OEM replacement part sourced directly from the manufacturer.

This part is a replacement spring ignition switch. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken or faulty spring ignition switch in a variety of gas chainsaw models.This part is essential for applying tension to the throttle control lever. If the spring ignition switch is malfunctioning, the chainsaw will not work properly, and the user will not have sufficient control over the throttle. When working on or near an engine, ensure the equipment is powered off and completely cooled down before starting any work. Proper tools are required to replace this part. For more accurate information on how and where to install this spring ignition switch, the appropriate owner's manual and equipment diagrams should be referenced. As an authentic replacement part, this spring ignition switch is suitable for use on several different models of gas chain saws manufactured by Husqvarna, Poulan, and Jonsered. This is a genuine part made of high-quality, durable materials and is sold individually.

The air filter works to prevent contaminants from entering the chainsaw’s carburetor. When the air filter becomes clogged with things like dust, yard clippings, pollen, and other materials, it cannot supply fresh air to the carburetor. If the carburetor does not have enough air to mix with the gasoline, it cannot create a fuel mixture for the engine. If you see signs that the engine is not running correctly, runs roughly, or does not start at all, check the air filter and replace if needed. It is important to check the air filter frequently to prevent damage or engine inefficiency. Keep several air filters on hand to make swapping them out convenient. A good rule of thumb is to replace air filters annually. This air filter is compatible with chainsaws made by Craftsman, McCulloch, and Poulan. This air filter is a genuine OEM part.

This part is specifically designed for use with chainsaws. This tube intake is designed to create a flexible path between the adapter and carburetor, ensuring efficient equipment functionality. If the tube intake becomes worn, detached, or cracked, the carburetor may not be able to properly mix the correct ratio of air and fuel, causing the engine to misfire or underperform. This tube intake is a genuine OEM replacement part that has been sourced directly from the manufacturer. This tube intake is designed to fit various different models of Husqvarna and Poulan chainsaws. Please note this part is sold individually.

The handle assist is the handle that is held to steer and control the machine during the trimming process. As the primary touchpoint, the handle has to provide enough comfort while assisting with the machine's function. This handle is designed to be gloves-friendly with a surface rough enough to provide security against slip. Use this as a replacement for a broken, loose, or worn handle. Remember always to hold the handle firmly while operating. This part is designed for use on trimmers or weed cutters made by Craftsman, Weed Eater, Poulan, or Poulan Pro. This is a genuine OEM replacement handle that will provide extra control and less hand fatigue. It is sold individually.

This quality air filter cover protects and secures the air filter to the chainsaw. If the air filter cover is not in place, the air filter could become excessively dirty or damaged. Through use or impact, the air filter cover can become damaged and may need to be replaced. A quick visual inspection will tell whether there are holes or cracks in the cover that necessitate a replacement.This air filter cover replacement requires no tools. The air filter cover comes with small tabs that can be used to secure it in place over the air filter. Tug on the original air filter cover and pull it out of its place before pressing the new one into place using its plastic tabs. Reassemble any other components before use.This is an authentic OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual component. The air filter cover is designed to be used with chainsaws manufactured by Poulan, Poulan Pro, and Craftsman.

The chainsaw oil pump kit is designed to ensure that the chain stays oiled so that the teeth do not burn or grind quicker than they should. This guarantees the sharpest cut and the safest operation of the equipment. The components in this kit are made of durable plastic and metal, but they are small, and over time, they could become damaged, broken, or missing. If this is the case, replace them with this OEM oil pump kit. This repair can be completed in a short amount of time, and should only require a screwdriver, wrench, and pliers to complete the work. This kit is a genuine replacement for Poulan, Husqvarna, and Jonsered chainsaws and will provide an exact fit for compatible models. There are more than 150 models that can use this oil pump kit from Poulan, which includes everything needed for replacement. If your chainsaw doesn’t seem to be running at its best or if the automatic oiler isn’t working properly, this OEM pump kit could be the solution.

Designed for use with a wide range of string trimmers, this momentary switch is a genuine OEM replacement part. A momentary switch, also known as a kill switch, is a safety precaution that kills an appliance's engine in a moment, even if the engine is not set to the off position. This helps prevent accidents if the operator begins to lose control of the trimmer. At the touch of a button, the engine cuts and cannot be restarted for a short period (usually about five seconds). Momentary switches are positioned in a way that they don't often sustain damage but, over time, they can wear out. Once a switch stops working, it will need to be replaced to ensure safe operation. This is a fairly straightforward fix that only requires a screwdriver to open the tiller's handle and pliers to safely remove the wiring. This part is designed for string trimmers made by Poulan, Weed Eater, Paramount, and Husqvarna. It ships individually of any other hardware is comes sourced from the original manufacturer.

This piston is an important part of the internal function of a chainsaw. The piston moves in and out of the cylinder while pushing the connecting rod that turns the crankshaft. Without a functioning piston, the chainsaw will not work. The piston could fail due to natural wear and tear, or it could become damaged because of other issues with the chainsaw. Corrosion could also be a problem. Regardless of what causes the pistons to have problems or to break, owners need to replace them as soon as they see a problem. This is a genuine OEM replacement piston kit. The kit includes a piston, piston pin, piston ring, and two piston pin retainers. The piston kit is only for use with chainsaws. It is compatible with several brands including Husqvarna, Poulan, Poulan Pro, and Craftsman.

This product is the chainsaw's engine cylinder, which holds fuel ignited by the spark plug. It fits into the existing chamber and houses the pistons during use. It is attached to the carburetor for fuel injection. The spark plug is set within it to ignite the fuel. This part has to be screwed securely into place prior to use and requires lubrication for the engine to run smoothly. If the engine suffers from poor fuel ignition, or leaking fuel, the cylinder may be cracked. When installing the new part, a few holes may require a tap to fit each specific machine. Pistons and bolts sold separately. Existing parts should be cleaned prior to use. This OEM replacement part is sourced straight from the manufacturer and works with certain models of Poulan and Husqvarna small engines.

This is a replacement oil cap for a variety of small gasoline-powered tools they build. These devices include power saws, chainsaws, trimmers, and pruners. The oil cap is tethered to the oil tank, granting easy access to the engine oil for filling or replacement while preventing outside contaminants from getting into the oil basin and, thus, the crankcase. While the cap is not a moving part, it is one of the most exposed pieces of this work equipment. As such it collides with multiple heavy objects such as other tools, trees, cement structures, and truck beds. This type of wear and tear can cause the interior threads of the cap to warp so that the cap cannot be closed tightly. The cap can also be damaged so that it leaks. For safety reasons as well as for the proper operating condition of the equipment, a damaged oil cap should be replaced immediately. Make sure when removing the old cap that the tether is completely freed from the power tool, and make sure the new tether is properly attached. This replacement cap is a genuine OEM part, built to the same specification as the factory original piece and fits Ryobi and Poulan machines.

This left hand runner bracket is a genuine Husqvarna part, sold individually. This left hand runner bracket can be used as a replacement part in a lawn mower. This part is used to secure components within the appliance.If the left hand runner bracket suffers damage in the form of puncturing, scraping, denting, cracking, chipping, warping, or eroding, it should be removed and replaced by this genuine OEM replacement part before using the lawn mower again. It is a simple replacement process that will only require basic tools to conduct.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This left hand runner bracket is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.

This 50-inch blade is made for use with riding lawn mowers by Craftsman and Husqvarna. The blade is the component that is responsible for cutting grass or other foliage when the lawnmower is in use. The blade can become worn over time and will leave grass with frayed edges. If the blade is worn out, it will need to be replaced to create a healthier-looking lawn. Replacing the blade will create a clean cutting edge after regular use of a lawnmower.If the mower blade needs to be replaced, a pair of pliers, a socket set, and a wrench set will be required. Place the lawnmower on a stable surface and pull up the blade deck for better access to the 50-inch blade. Take out the blades and the sheared pins before replacing them with new components. Reassemble the deck and test the lawnmower before use.This is an authentic OEM replacement component that is directly sourced from the manufacturer. It is sold as a single part. The 50-inch blade is made to be used in several lawn mowers and lawn tractors manufactured by Husqvarna and Craftsman.

This mulching blade is a genuine Husqvarna part, sold individually. This mulching blade can be used as a replacement part in a lawn mower. The purpose of the mulching blade in a lawn mower is to mulch grass clippings and eventually disperse them across the lawn to keep the soil healthy.The mulching blade in a lawn mower might need to be replaced at some point within the standard lifespan of the appliance if the mulching blade is dented, cracked, punctured, eroded, or otherwise damaged. If the mulching blade cannot finely chop the grass clippings collected during the operation of the lawn mower, the mulching blade should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This mulching blade is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Murray, and Poulan.