Poulan Chainsaw Parts

A piston ring is a component located between a piston and a cylinder and helps the engine operate correctly. This component maintains gas compression between the cylinder wall and piston, makes lubricating oil to prevent scuffing, transfers heat from the crown of the piston to the cylinder, and prevents the piston from hitting the cylinder wall. There are several signs that a piston ring needs to be replaced. Excessive smoke may come out of the engine, oil may be used more rapidly, and your equipment might have a decreased performance without the power it used to have. If the engine is still in good shape, but the rings have lost their tension, replacing the piston ring is the best solution. Inspecting the cylinder for wear is also important since damaged piston rings can lead to cylinder wear. This piston ring is a genuine OEM product directly from the manufacturer. It comes as an individual part. It can be used on hedge trimmer, leaf blowers, and trimmers from Husqvarna, Weed Eater, and Poulan. Several tools, including a screwdriver and wrenches, might be required to install the replacement part.

This replacement part is an oil cap and is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. This part is usually found in appliances or machines that require oil to run. This cap allows the oil tank to be sealed so that debris and dirt do not get inside the tank. The cap also asks as a safety precaution so that oil does not escape from the tank. A new oil cap might be needed if the current one is damaged or broken. If the oil cap is not able to stay in place, it should be replaced immediately. It can be dangerous to operate any type of machine without the oil being secure inside the tank so be sure to replace this part as soon as possible. This oil cap is sold individually. This is also a genuine OEM replacement part sourced directly from the manufacture.

The fuel filter is designed to clean the fuel before it enters the carburetor. This helps to catch dirt and debris that can get into the fuel line and build up over time, affecting the performance. When there is a clean fuel filter in place, the engine will run at peak performance. Over time, the filter will become dirty and clogged with debris and fuel residue, requiring replacement as a part of routine maintenance. This OEM replacement can get lawn and garden equipment back in shape in no time. Prior to the repair, make sure to disconnect the spark plug and drain the fuel. This genuine OEM fuel filter from Husqvarna is compatible with multiple models of engines. It can be used with chainsaws from Poulan, Jonsered, and Husqvarna, including more than 150 different models. This filter is sold as an individual unit.

This knob is a genuine Husqvarna part. It is for use on a blower. The most common reason that a knob will need to be replaced is that the screw has been stripped from force or repeated use. The plastic knob handle may also become worn or damaged over time.Replacing this knob is very simple, but some safety precautions are necessary. Be sure to remove the wire and boot from the spark plug to prevent the appliance from starting accidentally. Be sure the fuel tank is empty. This knob is a genuine OEM part sourced directly from the manufacturer. This knob is compatible with several models of blowers, including Husqvarna, Poulan, and Weedeater. It may be compatible with blowers manufactured by AYP, Craftsman, Jonsered, McCulloch, and RedMax. Use the compatibility checker to find out. It also replaces obsolete part number 530049485.

This part is a handguard spring for a chainsaw. The handguard spring returns the handguard to the forward position when the handguard is released.A new handguard spring may be needed if the handguard no longer returns to the forward position when the handguard is released. If the spring is broken in any way, it will no longer work properly and will need to be replaced. The spring could become damaged or break after normal use due to normal wear and tear over time. If this is the case, it will need to be replaced. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This handguard spring is a genuine Husqvarna part. It is sold individually. This particular handguard spring is compatible with chainsaws that are manufactured by the Husqvarna brand and the Craftsman brand.

This screw is designed to be used in many different chainsaws to connect and hold together various components. The screw can be used on its own or placed with a nut in a pre-drilled and threaded hole. If a nut is going to be used, it is best to choose one with the same threading and finish as the screw that will be used. A screw can become damaged in many ways that will require a replacement. Corrosion, excessive stress, or high temperatures may weaken the screw. In some cases, the damage can cause it to break or become loose and no longer properly secure other components of the chainsaw. A visual inspection can help determine if corrosion is present or the screw is damaged or broken. If the screw is stripped, a bolt remover may be needed to remove it to make the replacement.This screw is a genuine OEM replacement part provided directly from the manufacturer. It is sold as an individual component. The screw is compatible with chainsaws created by Poulan, Poulan Pro, Craftsman, and Husqvarna. A screwdriver is needed to replace, remove, or install the replacement part.

This is an OEM replacement screw that is specifically designed to secure the fuel tank on select lawn and garden equipment. The fuel tank retainer screw is made of durable metal and will be screwed to the fuel tank and the body of the machine, holding the tank in place and preventing it from being exposed to excessive vibrations or potential spillage. These screws can become worn over time or be lost in the process of other repairs. This genuine OEM fuel tank retainer screw is compatible with hundreds of trimmers, blowers, edgers, and pruners. It can be used with select models of machines from Poulan, Husqvarna, Weed Eater, and Jonsered. Owners should check their parts diagram for exact placement and part number compatibility as fuel tank retainer screws come in different lengths and diameters, so they are model-specific. This screw is made of durable metal and will require a Torx driver to install. The fuel tank retainer screw includes a built-in washer and is sold as an individual unit. Those who need more than one will have to purchase multiple quantities.

This screw is designed to be used with a range of handheld land and garden tools. The screw is a common piece of hardware used to fasten various parts of equipment and machines. Screws can be used for a range of applications depending on the equipment.Screws are meant to last, but they can wear down over time. The threads of the screws may become damaged or worn away. The screw could break or become corroded. When working on the machines, it is also possible for the screws to become lost. Having extra on hand can be a good idea. Replacing the screw is a simple project.This screw is intended for use with blowers, edgers, gas trimmers, and other trimmers. It is compatible with models from a variety of brands including Poulan, Husqvarna, Weed Eater, and Jonsered. Each screw is sold individually. This is a genuine OEM replacement screw that has been sourced from the manufacturer.

This is a carburetor gasket, which means it is placed between the carburetor and the adapter on select models of chainsaws, and it is responsible for creating the seal between the two. This allows for proper compression and airflow in the carburetor. Over time with regular exposure to pressure and high heat, gaskets can become warped, corroded, or shrink. This will affect their ability to create a strong seal and they will need to be replaced as soon as possible to prevent further damage or engine performance issues. This OEM carburetor gasket is manufactured to exact standards by Husqvarna and compatible with chainsaws from their brand, as well as select chainsaws from Poulan. Check the owner's manual for parts compatibility and exact application of this gasket. This replacement gasket is made of durable metal and is sold as an individual unit. No hardware or additional components are included with this unit. Be sure to allow the engine to cool before doing any repairs and wear gloves to protect the hands whenever performing engine work. Disengage the spark plug to ensure safety at all times when working on the engine, as well.

This is a genuine replacement ignition module for select Husqvarna lawn and garden equipment engines. The ignition module, also known as the armature-magneto, creates high voltage power in pulses, which then passes on to the spark plugs and allows them to create the spark to fire the engine. This part consists of the ignition coil and the spark plug boot, which is made with durable rubber and insulated metal. When the various components fail, the engine may not get the spark that it needs to turn over because the spark plug is not getting the power. A replacement will get the equipment running again. This OEM replacement part is designed for use on gas-powered blowers and string trimmers, including select models from Husqvarna, Poulan, Weed Eater, and Jonsered. The ignition module comes as a complete part and includes the boot assembly and coil, so no additional purchases will be required. Hardware is not included, however, and will need to be bought separately when it is needed. This unit is sold individually. The engine should be cool before doing any repairs and gloves should always be worn to protect the hands during engine repairs and parts replacements.

This carburetor adapter seal is a genuine Husqvarna part, sold individually. This carburetor adapter seal can be used as a replacement part for chainsaws. The function of the carburetor adapter seal is to protect the carburetor from taking in external materials such as dirt, debris, and pebbles. The role of the carburetor is to take in air and fuel and mix them together at the proper ratio to ignite the spark plugs and turn on the engine. A carburetor adapter seal might have to be replaced if it can no longer effectively seal off the carburetor from external materials. Damage to the carburetor adapter seal can come in the form of punctures and erosion to the metal material, which can loosen the component and allow debris to enter and damage the internal machinery. If this is the case, this genuine OEM replacement part must be ordered before using the chainsaw again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This carburetor adapter seal is compatible with the following brands: Husqvarna, Poulan, and Craftsman.

This black starter handle is used for a range of handheld lawn and garden tools. The handle is the part that connects to the starter rope. When the handle is pulled, the started rope will rotate the clutch assembly and start the engine. Although the handle is simple, it is an essential part of the machine and helps to make starting it possible.The handle is made from plastic. It can become damaged and cracked over time and from repeated use, necessitating replacement. If the starter handle is broken, it will be difficult and in some cases impossible to start the machine. Even small cracks in the handle mean it should be replaced. A damaged starter handle could also be dangerous if it breaks while trying to start the machine.The starter handle will work with certain models of trimmers, pruners, and blowers from Husqvarna, Weed Eater, and Poulan. This OEM replacement starter handle is sourced from the manufacturer and is sold individually.

This genuine Husqvarna filter holder can be used as a replacement part for string trimmers. The function of a filter holder, otherwise known as an air box, is to take in external air flow and channel it through a network of valves into the cylinder of the engine, which is where the fuel combusts and ignites the spark plugs.A filter holder might have to be replaced if it shows symptoms of disrepair or malfunction that prevent it from transferring air flow into the cylinder. These symptoms of damage could include an engine that won't start or misfires frequently, reduced fuel economy, or block smoke pouring out of the exhaust. Though these symptoms are not necessarily directly attributable to the filter holder, if a visual inspection shows that a damaged filter holder is indeed responsible, it should be replaced immediately. Remember to wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This filter holder is compatible with the following brands: Husqvarna, Poulan, and Weed Eater.

This air filter is a part of the air cleaning system on select lawn and garden engines. Combustion engines take in air and that is mixed with the fuel in the carburetor and then sent to the engine. The air filter is designed to catch particles and debris that come into the engine so that the air getting through is clean and pure. The filters naturally become clogged with regular use so replacing them is a part of routine maintenance that should be done every six to 12 months, depending on frequency of use. In some cases, the filter may become clogged in between maintenance, which would require an additional replacement. It may be helpful to keep an extra filter on hand. This OEM air filter is manufactured by Poulan to exact standards. It fits a variety of Poulan machines, as well as those from Weed Eater, AYP, and Husqvarna. It is used in various models of pruners and trimmers and does not require any tools for replacement. The air filter is made of durable foam material and designed to catch fine particles to ensure the cleanest air enters the engine. It is sold individually.

This genuine OEM muffler gasket is sourced directly from the manufacturer for use in weed eaters and chainsaws to diminish the noise level. The muffler gasket seals the space where the engine and muffler connect to prevent air and noise from getting in or out. If the gasket is damaged or missing, hot air from the engine would escape and melt the housing cover. The noise level can be affected as well. During routine maintenance, the muffler housing should be removed to examine and replace the gasket. The cost is negligible so this gasket should be routinely replaced; don't wait for damage to the housing. A wrench or socket set and a screwdriver are needed for the replacement. The engine and muffler must be cool to touch before repairing. Remove the screws holding the housing cover and set the lid aside. Use the ratchet to remove the screws from the muffler. Remove and replace the gasket on the backside of the muffler. Reassemble the muffler unit using the ratchet to secure the screws. Reinstall the housing cover. The muffler gasket is sold as an individual unit. It is designed for use in weedeaters and chainsaws manufactured by Craftsman, Husqvarna, Poulan, and Poulan Pro.

This ball bearing and seal are used in a range of chainsaw models. It acts as part of the blade assembly and is designed to both lessen friction and stabilize moving parts. This bearing is also set within a race and the entire race/bearing/seal assembly must be replaced at the same time. The bearing is encased with a rubber seal, which prevents fuel leakage and keeps the engine working smoothly. It does not impede the bearing as it turns. Ball bearings are placed in high contact areas and wear down due to friction. They need to be regularly replaced for optimal performance. If the engine shows difficulty while running, or is louder than usual, the seal or bearing may have worn down. This OEM replacement part is sourced from the manufacturer and works with certain models of Poulan small engines, including the Poulan/Poulan Pro 2900, and Husqvarna chainsaws. This part replaces parts 530019259 and 530047827, both of which are obsolete.