Poulan Lawn Mower Parts

This is a quality replacement wheel assembly that is made for use with various lawnmowers. It is a rear wheel and located at the back of the lawnmower. The purpose of this part is to support the equipment and hold it away from the ground. It also makes it easy to use the lawnmower to cut the grass. The wheel assembly is made of durable plastic but can experience damage over time. It can also wear down through regular use and will need to be replaced.If the wheel assembly needs to be replaced, a socket set, pliers, wrench, and work gloves will be needed. Take the lawnmower and turn it off before placing it on a stable surface. Before moving forward, disconnect the spark plug wire for safety. Take the original wheel off of the lawnmower before replacing it with the new part.This wheel assembly is a genuine OEM replacement part that is sourced directly from the manufacturer. The part is sold as an individual item. It is made to use with a variety of lawnmowers manufactured by Husqvarna, Craftsman, Poulan, and Weed Eater.

Throttle control cable for walk behind lawn mowers. Connects the throttle lever to the engine carburetor. Replace if cable is frayed, broken, or binding.

Protective rubber boot that seals the steering rack and pinion assembly on lawn tractors. Replace if torn, cracked, or missing to prevent debris entry.

Fix a riding mower that won't start or has no electrical power with this protective fuse. Simple 5-minute replacement prevents electrical damage.

Replacement ignition key for walk behind lawn mowers. Starts and stops the engine. Needed when original key is lost, broken, or worn out.

This is a bellcrank ground drive intended for use with riding mowers, tractors, and trimmers. The bellcrank ground drive employs the idler pulleys when the pedal brake control shaft assembly is pressed. A new bellcrank may be needed if the original was faulty, or if it becomes significantly worn through general operation of the machinery. However, installation of a new bellcrank is relatively simple. Only a few tools will be required when replacing this item, including: a socket set, a set of pliers and a hex wrench. The removal of the mower deck will also be required. The user should refer to their owner's manual for guidance regarding their specific model.This is an OEM part sourced directly from the manufacturer. It is sold individually. The bellcrank ground drive is designed for use in Husqvarna, Poulan, Weed Eater, and Jonsered models.

Torsion spring for lawn tractor brake system. Installs on brake assembly to provide tension. Replace if broken, stretched, or missing for proper brake operation.

Spacer retainer for lawn tractors and riding mowers. Maintains proper spacing between components. Replace if cracked, broken, or missing during maintenance.

This is a V-belt that connects the engine pulley to the mower deck pulleys, transferring power to spin the cutting blades on a riding lawn tractor. It is essential for engaging and driving the mower blades during operation. Replace this belt if the blades won't engage, the belt is cracked, frayed, stretched, or if you notice squealing or slipping when the blades are activated.

Chain overheating or binding? This oil pump plunger and gear assembly restores proper bar and chain lubrication. Fits over 125 chainsaw models.

Chain brake won't engage or is damaged? Replace this safety assembly that stops the chain instantly. Protects against kickback injuries and loose chains.

Piston ring for gas chainsaw engines. Seals the combustion chamber around the piston. Replace if worn, damaged, or causing poor compression.

Grass collection bag for walk behind lawn mowers. Attaches to the rear discharge chute to collect clippings. Replace if torn, cracked, or missing.

Replace your cracked, worn, or damaged lawn mower wheel assembly. Installs on the axle for smooth rolling and maneuverability across all surfaces.

Replacement retainer ring for riding mower tractors. Secures components in place. Order when original is broken, cracked, or missing from assembly.

This 1/4-20 hex nut has a great variety of uses on lawn and landscaping equipment. As a lock nut, it can be tightened and retains its grip, even without the use of a washer. This particular piece of hardware appears in many connective points on push mowers, zero-turn mowers, riding mowers, tillers, lawn tractor implements, and other types of equipment manufactured by Husqvarna, Poulan, Jonsered, and Weed Eater. For instance, with MTD mulching mowers, these hex nuts are used to secure the mower housing to the manifold of the mower. More than just with gasoline-powered lawn tools, these versatile nuts are also found on handheld tools like impact wrenches and tools driven by compressed air. Hex nuts bind tightly with their locking grip and seldom come off. The more likely scenario, especially since so many are used in manufacturing and by power tools, is that these nuts will become lost in the course of maintaining, cleaning, and repairing mowers and other equipment. For this reason, it's always important for the user to purchase more than the anticipated number needed. Make sure also to purchase hex nuts like these that are OEM certified and guaranteed.