Poulan Lawn Mower Parts

Hinge rod for walk-behind mower discharge chutes. Allows chute to pivot while staying attached. Replace if bent, broken, or missing to secure chute.

If your riding mower won't start unless the brake is engaged or starts in unsafe conditions, the interlock safety switch may have failed. Direct replacement.

This is an engine zone control cable, also known as a control cable, manufactured by Husqvarna. This component stops the blade when a lawn mower handle is released. When this part goes bad, it can cause the brake not to release even when the handle is pressed down. Engine zone control cables are known for experiencing wear and tear with regular use. If the cable has any signs of damage, cracking, wear, or stretching, it will need to be replaced. First, disconnect the spark plug wire before releasing the cables from the handle. Next, remove the drive cover before removing the engine zone control cable. The replacement engine zone cable can be connected to the transmission and the drive cover can be replaced. Install the control cable back onto the mower handle, reconnect the spark plug wire, and the lawn mower will be usable again. This is a genuine OEM replacement part that comes directly from the manufacturer. It can be used for mowers from Husqvarna, Weed Eater, AYP, Craftsman, RedMax, Poulan, Poulan Pro, Jonsered, and McCulloch. It is sold individually, and the replacement is considered easy. A screwdriver and pliers are the only tools that will be needed.

Throttle control assembly for front-engine lawn tractors. Mounts to dashboard or control panel. Replace if cable is broken, handle is cracked, or missing.

This is an extension spring that provides tension for the brake mechanism on a snow blower. It ensures the brake engages properly when the operator releases the control handle, stopping the auger or drive system. Replace this spring if the brake feels weak, fails to engage, or if the spring is visibly stretched, broken, or detached.

Flat idler pulley for riding mower and lawn tractor drive systems. Replace if cracked, worn, or damaged to restore proper belt tension and alignment.

This is a hex head mounting bolt used to secure the cutting blade to the spindle on a lawn mower deck. It holds the blade firmly in place during operation to ensure safe and consistent cutting. Replace this bolt if it is stripped, bent, corroded, or if the blade wobbles or becomes loose during mowing.

This replacement part is a pulley. This is a genuine replacement part made by Husqvarna. Pulleys are very common in different types of machinery. This part allows for other pieces to be connected and work together so that the machine can operate effectively. A new pulley might be needed if the user notices unusual noises coming from inside the machine. This can be due to a malfunctioning pulley system or damage inside the appliance. Due to the friction that this pulley experiences, it is not unusual for this part to need replacing after years of normal use. Be sure the engine is completely powered down before attempting to replacing this part. Work gloves are also recommended when working near the engine. This part is sold individually and is sourced directly from the manufacturer. This is a genuine OEM replacement part which ensures proper fit.

Wheel gauge bracket kit for 42-inch riding mower decks. Replaces cracked, bent, or missing brackets that support gauge wheel assemblies.

Plastic star-shaped handle adjustment knob for walk-behind lawn mowers. Replace this black control knob if cracked, broken, or missing.

Mower won't move forward or backward? This transmission gear connects to the drive shaft to transfer power to the wheels. Direct fit replacement.

Control cable connects handles to engine and blade system on walk behind mowers. Replace if cable is sticking, frayed, or broken for proper speed control.

This part is a replacement foot rest pad. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a worn or defective foot rest pad in a variety of lawn tractor models. This particular pad is intended for the left side.The foot rest pad ensures the user has a comfortable, non-slip surface on which to rest their foot. This part is subject to wear and tear and will require replacement with a genuine OEM part if worn, detached, or no longer effective. When working on or near any mechanical equipment, it is important to verify that it is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to place this wheel, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this foot rest pad is suitable for use on several different models of lawn tractors manufactured by Husqvarna, Poulan, and other brands. This is a genuine part made of high-quality, durable materials and is sold individually.

This replacement v-belt is designed for use in select high-wheeled trimmers. The belt is responsible for driving the cutter head, and is sometimes called the drive belt or trimmer drive belt. It attaches to the axle and the cutter and as the belt rotates, it turns the cutter head so that it can do the trimming. Over time, this belt can become worn, stretched, or twisted. This will require a replacement in order to ensure peak performance of the trimmer. With this OEM trimmer v-belt replacement, it will be easy to get back to work. This genuine OEM v-belt is designed for use in trimmers from Husqvarna, Poulan, Craftsman, Roper, and Weed Eater. It is made of durable composite rubber material and includes a one-year warranty from the manufacturer against defects. Replacing the belt requires a screwdriver and pliers. Always allow the engine to cool completely and wear gloves for hand protection. Beware of pinching or crushing injuries when replacing belts and other tensioned parts. This belt is sold individually and does not include any hardware or additional components.

Handle knob for lawn mowers, snowblowers, and trimmers. Attaches to upper or lower handle adjustment levers. Replace when cracked, broken, or missing.

Secures the sway bar to the chassis frame on riding mowers. Replace if bracket is bent, cracked, rusted, or missing to restore proper mounting.