Poulan Lawn Mower Parts

This is a lawn tractor spindle assembly that can be used as a replacement part for many models. The spindle will connect the front wheel to the front axle. In this case, this is for the right-hand side of the tractor. If there is a problem with the spindle, the owners might notice that the wheels have trouble rolling and moving forward, or that they feel unwhen using the tractor.The spindle is made from durable metal that is made to last. However, there could be issues that cause breaks because of stress fractures. They could corrode or they could bend during an accident with the tractor. Regardless of the problem, the owners will want to make sure they replace them as soon as possible to ensure proper movement of their tractor.The lawn tractor spindle assembly is used with select lawn tractor models from Poulan, Husqvarna, Weed Eater, and Jonsered. The right-hand assembly is sold individually. This piece is a genuine OEM replacement part sourced from the manufacturer.

This replacement part is a mulch door intended for use in lawn mowers. It closes the discharge chute so that grass cuttings can be recut and turned into mulch.The mulch door can become damaged from impact. If bent or worn out, it may become stuck or fall out of place, necessitating replacement.This is a genuine OEM replacement part manufactured by Husqvarna. This part is sold individually.

This genuine OEM replacement idler return spring is located in the lower deck of a lawn mower or lawn tractor and helps to secure the idler pulley in place. While a lawn mower is in motion, the parts of the lower deck can shift with inertia. To keep the idler pulleys securely positioned to the belt that drives the blade, manufacturers connect the pulley to the outer frame of the deck with an idler return spring. Springs slowly lose tension over time, and if the spring becomes too loose, the pulleys can become unsecured from their place on the lower deck. Replacing an idler return spring is an easy fix and should only take a few minutes. Simply lower and remove the deck, take out the worn-out spring, and replace it with the new. We recommend wearing gloves and using caution as the old spring may still have enough tension to flex back on your hands. This replacement idler return spring will work with lawn mowers from Ryobi, Jonesred, Husqvarna, Poulan and Weed Eater. It is a high-quality part sourced from its original manufacturer and ships individually.

This hinge rod is a genuine Husqvarna part, sold individually. This hinge rod can be used as a replacement part in a lawnmower. The purpose of a hinge rod in a lawnmower is to affix to the discharge chute so that the chute has a range of motion while remaining attached to the appliance to fulfill its function.The hinge rod in a lawnmower might have to be replaced if it is damaged. The hinge rod could be punctured, scraped, dented, cracked, or eroded to the point that the hinge rod can no longer affix to the discharge chute or that the component is loosened to the point that a repair cannot fix it. If this occurs, the hinge rod should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part, sourced directly from the manufacturer. It is sold individually. This hinge rod is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Ariens, Murray, and Poulan.

An interlock switch is responsible for shutting down the engine if the equipment is running in an unsafe manner. It is a safety component that prevents the engine from starting if you aren't pressing down the brake with your foot or if the parking brake isn't in place. If the interlock switch beaks, the current will no longer reach the solenoid coil even if the brake is depressed. This will result in the engine not starting. If turning the ignition key doesn't result in the click of the solenoid, the damaged part is likely the interlock switch. The first step is to disconnect the battery and then release the steering plate. Next, remove the interlock switch under the hood and install the new one. At this point, the other parts can be reinstalled, and the lawn mower can be used. This is a genuine manufacturer-approved OEM part that is designed for Husqvarna, Ryobi, Craftsman, Dixon, Weed Eater, Murray, Ariens, and Poulan lawn mowers. This interlock switch is made with a high-quality plastic body and is sold as an individual component. A screwdriver will be required to make this replacement.

This is an engine zone control cable, also known as a control cable, manufactured by Husqvarna. This component stops the blade when a lawn mower handle is released. When this part goes bad, it can cause the brake not to release even when the handle is pressed down. Engine zone control cables are known for experiencing wear and tear with regular use. If the cable has any signs of damage, cracking, wear, or stretching, it will need to be replaced. First, disconnect the spark plug wire before releasing the cables from the handle. Next, remove the drive cover before removing the engine zone control cable. The replacement engine zone cable can be connected to the transmission and the drive cover can be replaced. Install the control cable back onto the mower handle, reconnect the spark plug wire, and the lawn mower will be usable again. This is a genuine OEM replacement part that comes directly from the manufacturer. It can be used for mowers from Husqvarna, Weed Eater, AYP, Craftsman, RedMax, Poulan, Poulan Pro, Jonsered, and McCulloch. It is sold individually, and the replacement is considered easy. A screwdriver and pliers are the only tools that will be needed.

This throttle control assembly is a genuine MTD part sold individually. This throttle control assembly can be used as a replacement part in a lawnmower. The purpose of the throttle control assembly in a lawnmower is to allow the operator of the appliance to fully regulate and maintain the speed and pacing of the appliance to a customized setting that adheres to the needs and comfort of the operator.The throttle control assembly could be punctured, dented, ripped, torn, scraped, scratched, warped, or eroded, and if this damage precludes the function of the throttle control assembly, it should be removed and replaced by this genuine OEM replacement part. Always unplug the appliance before performing any kind of repair or replacement.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This throttle control assembly is compatible with the following outdoor appliance brands: MTD and Craftsman.

This is a genuine replacement brake spring that is designed for use with select snowblower units. The brake spring is connected from the idler pulley to the frame assembly. This provides the tension for the brake on the snowblower, allowing the brake to function correctly. Over time, this spring can become worn and stretched and need replaced. There may also be impact damage or other situations where the spring could break. Regardless of the cause, a broken brake spring needs replaced immediately for safe operation of the machine. It is important to disconnect the power and wear gloves when performing repairs on snowblowers, and especially when working near the blades. Disconnect the old spring, hook the new spring through the proper holes, and then reconnect the power and start the machine to test the brake.This genuine OEM brake spring is manufactured to exact standards by Husqvarna. It can be used in select snowblowers and throwers from Husqvarna, Poulan, and Jonsered. This is sold as an individual piece and does not include any hardware or other parts. The brake spring repair will require a screwdriver, pliers, and adjustable wrench.

This flat idler pulley is designed for use with outdoor lawn and garden power equipment, specifically for many different models of lawn tractors and riding mowers. It is compatible with products from brands such as Craftsman, Husqvarna, Poulan, Murray, Ariens, and Troy-Bilt. The flat idler pulley part is crucial for the proper functioning of the lawn mower because it connects to the idler bracket. The purpose of the flat idler pulley is to apply tension to the v-belt. The replacement or repair process of the flat idler pulley will require a moderate amount of savvy. A wrench would be very helpful for the installation process.This flat idler composite pulley is an OEM part sourced directly from the manufacturer, and it is sold individually. It is manufactured by Husqvarna. This flat idler pulley is made out of metal.

This replacement part is a bolt, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. Bolts are found in different places inside many devices. This part is essential to the overall operation of many machines. This specific one is intended for lawn mowers and assists the overall device in working properly.A new bolt might be needed if the current one is damaged or missing. It is possible that the bolt can become stripped or damaged overtime, and should be replaced if this is the case. Be sure to reference the specific owner's manual for more information on how to replace or install this bolt. This is a single bolt. Be sure to purchase the correct amount as many machines require more than one to operate. This is a genuine OEM replacement part sourced directly from the manufacturer.

This replacement part is a pulley. This is a genuine replacement part made by Husqvarna. Pulleys are very common in different types of machinery. This part allows for other pieces to be connected and work together so that the machine can operate effectively. A new pulley might be needed if the user notices unusual noises coming from inside the machine. This can be due to a malfunctioning pulley system or damage inside the appliance. Due to the friction that this pulley experiences, it is not unusual for this part to need replacing after years of normal use. Be sure the engine is completely powered down before attempting to replacing this part. Work gloves are also recommended when working near the engine. This part is sold individually and is sourced directly from the manufacturer. This is a genuine OEM replacement part which ensures proper fit.