Wendy May 09, 2013 for Model Number WHDSR316GWW I am replacing the timer knob as it has stripped out. I have another issue as well. The timer was replaced on this washer but I think they put in the wrong timer. I think the one was installed that goes to the other GE Super Capacity washer that has the soak cycles. Is this possible? It's very frustrating trying to guess which spot to set it to so that I can get an full wash and rinse cycle.
1 Answer Wendy, You will have to check the part number of the part that was installed to determine whether the right one was installed. The Timer for your washer is part number WH12X10350. Read More...
Jeff B January 16, 2013 for Model Number GE wle4000b1ww Washer will not agitate or spin. Drain pump works. Motor hums but will not turn drum. Cannot turn agitator by hand.
1 Answer Hello Jeff, You will want to pull the belt off the transmission pulley and make sure that the motor spins freely by hand. If it does then leave belt off and see if when you turn unit on it will spin freely. If it doesn't replace the motor WH49X10035. If it does then you either have something in between the tubs or you have a bad transmission assembly WH38X10002. Read More...
Eric December 28, 2012 for Model Number WBSR3140G2CC The washer starts washing while filling up and when draining. I replaced the timer. Now what could be my problem?
1 Answer Hello Eric. Test and see if power stop to the valve and water continues to come into the unit. If so, replace the water valve on the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Chris December 12, 2012 for Model Number wh12x10350 The knob arm control part #WH01x10310 came completely out of the timer washer WH12x10350. I placed in back in, it worked fine and now several months later it won't catch when pulled to start the machine. What will I need to fix it? Thanks. Model# WBSR3140G0WW
1 Answer Hello Chris, It will take a timer to fix this situation but, unfortunately, all appliance parts are listed by model number. In order to give you the correct part number or verify that you were looking at the correct part for your model machine, you can either re-post with the model number from the I.D. tag on your machine or call our toll free number (1-877-477-7278) and our representatives will be happy to look it up for you. Read More...
Larry O. June 13, 2012 for Model Number WHDSR316G2WW Washer will not spin,water does drain,also will wash clothes. Motor light blinking in 1 second intervals. Bypassed lid switch, still wont spin. Do I need to replace timmer?
1 Answer Hello Mitch! No, the washer timer WH12X10350 does not include the knob. What is your appliance model number? We will need to make sure the correct timer and knob is ordered. Thanks! Read More...
1 Answer Hello John. Check and make sure the belt WH01X10302 on the unit is not burnt or broken. If so, it will cause the problem you are having. Hope this helps. Read More...
Cesar October 05, 2011 for Model Number WBSR3140G2WW The washer just do two things one when you start it fill with water and two dumps the water out and thats about it. The timer sounds but does not do anything else. What can I do?
1 Answer Hello Cesar. Check and make sure the belt WH01X10302 is not broken. If not, see if the motor has power coming to it to run. If so, you will need to replace the motor WH20X10093. If there is no power to the motor, you will need to replace the timer WH12X10350. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Jerry September 17, 2011 for Model Number whdsr3165ww Installed a new timer, belts good, but has a blinking green light. Starts to wash during the filling cycle????
David September 17, 2011 for Model Number whdsr316g5ww It washes while the water is filling up,if open the lid it stops.
1 Answer Hi David. The timer has shorted internal cams . This part # is WH12X10350. Thank you. Read More...