1 Answer Hello Patty. It sounds like the user interface WP8270168 is bad and will need to be replaced on the unit. Read More...
Sharon June 07, 2014 for Model Number SHE33M06UC/50 The console plastic cover broke off when opening the door for this dishwasher. What part do I need to replace it?
1 Answer Sharon, the replacement fascia panel listed for your Bosch dishwasher is part number 00478776. Thanks! Read More...
Randy May 01, 2014 for Model Number KUDS01FLSS2 I just purchased the control panel AP3177981 - I have not started to switch it over yet (tonight) - my question - when changing it out does the front face of it fit in between the stainless skin and the door ?
1 Answer Randy, yes the control console fits between the inner door liner and the front door panel, sort of. " The control panel on the KitchenAid KUD01 Dishwasher comes in two versions: a) Split Controls: Top and Front Display and b) Front Display. Both control panels are removed in the same manner. 1. Remove the six (6) screws securing the control panel to the door frame. 2. The control panel will now drop down and be free of the door assembly. The wiring harness will remain connected to the console components." Read More...
Mel December 16, 2013 for Model Number KUDPO1FLSS3 Push normal wash and high temp scrub, buttons light up and when go for start no lights go on and it would not wash.
1 Answer Mel, In most cases when there are no lights coming on then the issue is caused by a faulty keypad on the control panel. The way to determine if it is an issue with the control panel or the control board is to do a keypad test. The keypad test is checking continuity of certain points on the ribbon harness by using the key chart on the tech sheet which is located under the kickplate of the unit. Read More...
Lae October 07, 2013 for Model Number MDBH979SAMO Lights for normal wash, heated dry, auto lock and start buttons are blinking. Dishwasher doesn't start.
1 Answer Hello Lae. Based on the issue, it sounds like the control panel is bad and will need to be replaced on the unit. Read More...
Dana September 20, 2013 for Model Number GU2500XTPQ6 We have flashing lights on panel and in the time remaining their are two lights that look like dashes. The washer of course will not run. Could this be just a fuse or the control panel?
1 Answer Hello Dana. That is an error code the door switches are bad and will need to be replaced on the unit. Read More...
Chris September 16, 2013 for Model Number Maytag Jetclean Plus Dishwasher-MDBH989AWS The lights on the face off the dishwasher do not work so the dishwasher will not function. Which control board should I get?
1 Answer Hello Chris. You need to check and see if the fuse W10258275 is bad and will need to be replaced. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Larry July 29, 2013 for Model Number kudso1flwh6 I need the touch control panel as the plastic film has deteriorated. I am finding it difficult to navagate on your web site. Please provide the part number and the cost. Thanks, Larry
1 Answer Hello Larry, The user interface is part number (AP3085303) for the model number KUDS01FLWH6. Read More...
Lori June 06, 2013 for Model Number GEW9250PW1 I have 6 yr old Whirpool dryer that will not light up when I push "Control on" button.Worse case scenario....will I need a new control panel?If so,what should this cost to fix?
1 Answer Lori, You will want to check to see if there is power getting to the main control board. If the control board is getting power but not sending power out then the main control is bad and would need to be replaced. If the control is sending power to the user interface then the user interface would need to be replaced. Read More...
Anthony C. April 28, 2013 for Model Number KUDS01FLSS3 Only one cycle lights up on the control panel . we are not sure if the dishwasher is working properly . I also have the same problem as someone else has asked, the plastic keypad on the door is very worn ,is this all included with the control panel. part # AP3177981 , my model dishwasher # is KUDS01FLSS3
1 Answer Hello Anthony. No, you will need to order the panel W10775980 and the interface WP8270168 for the unit. Read More...