Barrie O. July 28, 2012 for Model Number WCVH6800J1WW How do I install A Door Boot Seal on A GE Front load Washer. MODEL Number is WCVH6800J1WW? Thank you.
1 Answer Hello Barrie! The replacement boot for the listed model is part number WH08X10036. Please use the following link to assist you in your repair. Hope it helps! http://forum.appliancepartspros.com/washer-repair/8330-front-door-boot-gasket-ge.html Read More...
Arend July 04, 2012 for Model Number GHW9400PW1 Hi, is this bellow the correct one for GHW9400PW1? Thanks!
1 Answer Arend, according to your model number GHW9400PW1 the replacement bellow should be part number WP8182119. Thanks! Read More...
Steve June 26, 2012 for Model Number GHW9250MW0 I took the entire machine apart so I could replace the seals. Put it back together and installed a new bellows. (No parts leftover!) I do have a small leak coming from inside the tub door, at the bottom: the more water that's in the machine the more drips out. I know the bellows are installed in the right direction but am wondering what mistake I may have made. Do you have a suggestion?
1 Answer Hello Steve. The bellow WP8181850 needs to be straight and have no wrinkles in it. Also, make sure the bellow is correctly installed on the front panel of the washer. If not, it will not allow the seal to be correct in the unit. Read More...
Lmz March 18, 2012 for Model Number WFW9400SW00 What is the correct bellow part number for model # WFW9400SW00?
1 Answer Hello! The replacement bellow used on model WFW9400SW00 is part number WP8182119. Thanks! Read More...
1 Answer Hello Tammy. Based on the model number you provided, WPW10381562 is the correct front tub bellow. Hope this helps. Read More...
1 Answer Hello Ed. Remove the drawer from the unit and disassemble the drawer WP8540402. Now clean each port and cup with hot water. This should take care of the issues. If not, you may need to replace the drawer. You can also tilt the front of the washer with the level legs, so it lean just a little backwards to help with this. Hope this helps. Read More...
Joan March 05, 2012 for Model Number GHW9200LW What is the correct part number for the front bellow tub seal?
1 Answer Joan, according to your model the front bellow tub seal is part number WP8181850. Thanks! Read More...
Sean O. February 13, 2012 for Model Number Duet Sport WFW8410SW03 Which bellow seal and clamps will fit ths model? The number doesn't pull up in your data base.
1 Answer Sean, the bellow is part number WPW10111435. For the clamps use part numbers WP8540108 and W11032829. Thanks! Read More...
Dan February 06, 2012 for Model Number wvw9400sw03 Just wondering if this is the right one for my washer, it is WFW9400SW03?
1 Answer Hello Dan! The front bellow for model WFW9400SW03 is part number WP8182119. Thanks! Read More...
Margie February 05, 2012 for Model Number WFW8500SR00 I need to order a new bellows for my front load Duet and want to make sure I order correct part. Can you tell me the part number for this Whirlpool Duet model number?
1 Answer Hello Margie, for your model number we show the correct bellow is WPW10111435. Thanks! Read More...