Eugene George December 21, 2012 for Model Number MFI25668AEB Will high volt board cause the low volt board to go into sabbath mode or is sabbath mode only in low volt board, to get program mode hold door alarm key and temp down key release door alarm key wait 3sec board will not light up, will light up when any button on controls are pushed released lights go out, is sabbath controled only by low voltage board I hope this is enough information on my problem not sure which board to replace as frig is still working just ant get water or ice to come out using control panel its in sabbath mode
1 Answer Hello Eugene, Press and hold the Door alarm for 3 seconds to enter the user preferences mode. Once in the feature will be on freezer display and status on refrigerator display. Use freezer up and down to scroll through features and refrigerator up and down to change status. When done press door alarm for 3 seconds to exit. The Programming mode is to program code for the control board to operate. Read More...
Calvin W. November 01, 2012 for Model Number MFI2568AEB The water and ice dispenser is not working. The flapper valve cycles when the compressor is on. The lights flash on the control panel when the compressor is on. The refrigerator and freezer are working. I have been advised to replace the Low Voltage Board, the High Voltage Board and the water Valve. First, do you agree? Second, if I do replace these boards are they solder or mechincal connections? Third, If I do replace these boards are there any reprograming that needs to be performed and how do I reprogram these boards? What is and how do I override a lockout feature?
1 Answer Hello Calvin, This is a high voltage power supply issue. The manufacturer has a repair kit part number W10890094. Be aware that the "personality code" is listed on the units' I.D. tag along with the model and serial number. This number must be programmed into the control before the unit will cool properly. As per the technical bulletin: Order and install high voltage control board kit PN 12920710. The kit includes; control board, installation and programming instructions, return label and card for the old part. Note: As with all Refrigerators of this type, the correct “Personality Code” must be programmed into the new control board per the instruction sheet provided. The connections involve no soldering. All connections are spade and/or molex connectors. The lockout feature should be completely covered in the owners use and care guide. Read More...
Jerry June 02, 2012 for Model Number Maytag MFI2568AEW Display and dispenser no longer works. When I press any botton, the entire display lights up. Refrigerator/freezer is working fine. I swapped out High voltage board, same symptoms.
1 Answer Hello Jerry. Make sure the lock out feature is not on with the dispenser. If not, you will need to replace the LV board 67006294 in the unit. Read More...
Al February 06, 2012 for Model Number mfi2568aeq Lights are flashing on door display and ice dispenser door keeps opening and closing. freezer will not hold temp. will not dispense water or ice
1 Answer Hello Al. Based on the information you provided, you will need to replace the H.V. Board W10890094 in the unit. Hope this helps. Read More...
Bill January 31, 2012 for Model Number MFI2568aes I go thru the programing process when I try to turn the code off it blinks and I get F_ C. Looks like the top half of an 8 and F then nothing.
1 Answer Hello Bill. The L.V. Board 67006294 does not need to be programed. You will need to program the unit if you replace the H.V. Board on the unit. The codes you described means the code didn't take. You may need to reprogram the H.V. Board on the unit. Hope this helps. 1. Press and hold the Door Alarm Keypad DoorAlarm . 2. Press and hold Freezer Temperature Down Keypad . 3. Release the Door Alarm Keypad DoorAlarm and wait 3 seconds. 4. The control will display PE to indicate the programming mode. 5. Entry is confirmed by pressing the Freezer Temperature Down Keypad once more. 6. The control will display the current Program CODE. This value should be validated with the Program CODE printed on the unit serial plate. NOTE: If the Program CODE is correct, the Programming Mode is exited by pressing Door Alarm Keypad for 3 seconds. 7. Press the Refrigerator Temperature UP Keypad or Refrigerator Down Keypad to change the digit value with each key press. 8. The decimal point indicates the selected digit. Press the Freezer Temperature UP Keypad to select the next digit. 9. Once the desired Program CODE is entered, press and hold the Freezer Temperature DOWN Keypad until the Program CODE begins flashing indicating it has been saved. Read More...
Gus January 19, 2012 for Model Number MFI2568AES Refrigerator was freezing ramdom items, such as milk and vegetables. I changed the Thermistor as suggested on a prior question but it continues to freeze itmes.
1 Answer Hello Gus. If the thermistor is new, and you are still having items continue to freeze in the unit, you will need to replace the control WPW10127427. Hope this helps. Read More...
Gus January 19, 2012 for Model Number MFI2568AES Water dispenser is working but not making ice.The last time we used the water and ice dispenser was about 3 year ago. We moved and there was no water connection available so the refrigerator was in use but the water line was not connectect for that amount of time. I resently hooked up the water line to the refrigerator, but no ice.
1 Answer Hello Gus. You will need to check and see if the icemaker is cycling in the unit. If the icemaker is not cycling, then the icemaker W10583817 is bad and will need to be replaced. This part has been permanently discontinued by the manufacturer and we don't know of any source or replacement for the part. Thanks. Read More...
John November 27, 2011 for Model Number 59677532600 The water dispenser keep turning on and off on it's own and sometimes runs continuously. I disconnected the keyboard from the LV board and it stops.
1 Answer Hello John. Based on the information you provided, it sounds like the L.V. Board 67006294 is bad and will need to be replaced. Hope this helps. Read More...
Judy October 20, 2011 for Model Number MFI2568AES The lights on the water and ice dispenser are flashing and making a clicking noise. The refrigerator is not keeping a cold temperature but the freezer is.
1 Answer Hello Judy. Based on the information you provided, the H.V. board W10890094 is bad and will need to be replaced. It is located on the back of the refrigerator. Hope this helps. Read More...
Wally October 07, 2011 for Model Number MFI2568AES The display on my door is flashing and the door that the ice falls thru is opening and closing constantly. I had to disconnect the circuit board to get this to shut off operation of the ice n water features. I think the low voltage board in the dor is the problem. What do you think??
1 Answer Hello Wally. No, based on the information you provided, the H.V. board W10890094 is bad and will need to be replaced. This will repair the problems you are having. Hope this helps. Read More...