Jeanna July 08, 2011 for Model Number Ksrs25ilwh02 I can't find any info on what comes with the purchase of the ice assembly. Does it come with instructions? Is anything else needed to replace he unit? Also, what if it doesn't fit or work can it be returned? Thanks!
1 Answer Hello Jeanna! The icemaker assembly 2198597 has the icemaker components only included. This part does not include instructions. You will need to remove the bracket from your old icemaker and reattach it to the new icemaker. No other parts are needed for the installation. If for any reason this part does not fit or work with your appliance you may return the item. Here is our return policy link for you to view, thanks! http://www.appliancepartspros.com/customerservice/returns.aspx Read More...
Jeanna July 08, 2011 for Model Number Ksrs25ilwh02 Looking for a complete ice assembly for my kitchen aid fridge. Do you carry this and do you have a part number?? Thanks!
1 Answer Hello Jeanna, if your current icemaker makes 8 cubes you will order 2198597 and if it makes 5 cubes you will order WPW10190961. Thanks! Read More...
Bill July 08, 2011 for Model Number KSRS25CNB100 Is this the correct ice maker for my Kitchen aid refrigerator?
1 Answer Hello Bill! Yes, the icemaker assembly 2198597 is the correct part used on your Kitchenaid refrigerator model KSRS25CNBL0 (L0 instead of 100). Thanks! Read More...
Steve T. July 05, 2011 for Model Number 106.55524400 Kenmore Side by Side Is this the correct icemaker for Kenmore model# 106.55524400? Part Number: AP3182733 Manufacturer's Number: 2198597 (626663) Made by Whirlpool. Steve T.
1 Answer Hello Steve! Yes, the ice maker assembly 2198597 is the correct replacements used on your Kenmore model 106.55524400. Thanks! Read More...
Reba June 29, 2011 for Model Number KSRL25FRSS04 My ice maker works just fine, however the dispenser is not working (to access the ice through the door). What part is necessary for the repair? Apparently this is a common problem, something to do with the crushed ice feature, it causes something to freeze up and then the motor can burn up.
1 Answer Hello Reba. Based on the information you provided, it sounds like you will need to replace the dispenser motor W10271509. Hope this helps. Read More...
J. T. June 28, 2011 for Model Number ES5PHAXSL00 The icemaker on my Whirlpool Model # ES5PHAXSL00 stopped working. It stopped producing ice all together after a month of only working occasionally. We replaced the entire icemaker last week. It did produce ice for a couple days, but has since stopped working completely. Any suggestions?
1 Answer Hello J. T. The P.C. Boards W11629974 may be bad on the unit. Here is a link to our Repair Forum, this is a free service to our customers. Use this link to access the repair for your question. Hope this helps. http://forum.appliancepartspros.com/refrigerator-freezer-repair/29618-ice-maker-not-working-kitchenaid.html Read More...
Rrk June 26, 2011 for Model Number KSRA25CNWH00 The ice maker replacement states p/n AP3182733 has a 185 Watt heater, my original ice maker states 260 Watt heater. Is there any issues with using the lower wattage heater? Or is there a direct part number available with the same heater wattage? Thank you.
1 Answer Hi RRK. You are using the correct part. There wont be any difference in using a lower wattage heater. The ice maker is factory set for the correct amount of time it takes (5-7 seconds) to be energized to release the cubes. If the manufacture approves this update, then you should be fine. Thank- you. Read More...
Bob June 25, 2011 for Model Number kitchenaide ksrs25ikss01 my ice maker would not stop making ice when container on door was full. replaced p/c boards. ordered whirlpool part number ap3137510. you sent sub part 4389102. did not fix problem. your guy decided the replacement part was defective and sent a new one. still does not work. when initially installed, went through two cycles before it quit. i/m seems not to be the problem. led lights indicate no problem, but i noticed that when i accidently pressed the light switch, the led went out. this indicates to me that the controller is not operating when the door is closed. any ideas? could the sub not be the correct part?
1 Answer Hi Bob. When the ice maker head shorts out, it will continually ask the water valve for water. You can either order and replace the front motor module assembly, part # W10190935, or the whole ice maker part # D7824706Q. When the L.E.D. lights go out after the door switch is closed , this emulates just that the door is closed and the led emitter is reading correctly , passing through the ice bin and over to the left receiver board. The ice maker sounds to be at fault . Hope This Helps. Thank - you. Read More...
Pickledoldman June 23, 2011 for Model Number GS6NBEXRQ01 Replaced the IM control module. No water going to tray. Replaced inlet valve. Still nothing. Ejector arm turns but no water to tray.
1 Answer Hello Pickledoldman. You will need to check and see if the fill tube is frozen. If so, you will need to thaw out the fill tube so water can come in when the icemaker cycles. Hope this helps. Read More...
Enda K. June 17, 2011 for Model Number Whirlpool Fridge with ice maker & dispensor on door Ice maker stopped working and upon inspection discovered the white cog wheel on the control module on the side of the ice maker has broken. Can I replace the cog wheel, without changing the control module?
1 Answer Hello Enda. No, they do not sell just the cog wheel. You will need to replace the module. Hope this helps. Read More...