Dom March 15, 2017 for Model Number ED5RHGXMT00 I ordered part AP6009320 (compressor starting device), but I don't think this is right. In the video for part AP3885081 (compressor starting device kit) the gentleman mentions style 1 which is what I have. In fact my setup looks to be exactly what appears in the video for part AP6023677 (capacitor) including the single wire harness with white and red wires together, each with very narrow plugs maybe 3/16". Question is do I need part AP3885081 and AP6023677? My capacitor is fried and the internals of the white "style 1" housing are fried to pieces. Thanks!
2 Answers Dom, Based on your post description and information Yes, you will need both, the 8201786 / 2220475 start device kit and the WPW10662129 / 999532 capacitor. Presumably, you have not had the compressor replaced and still have the "production" compressor and start device in the ED5RHGXMT00 refrigerator. Between the written instructions and the videos attached to both parts, you shouldn't have any issues installing the components. Read More...
Dom March 15, 2017 for Model Number ED5RHGXMT00 I ordered part AP6009320 (compressor starting device), but I don't think this is right. In the video for part AP3885081 (compressor starting device kit) the gentleman mentions style 1 which is what I have. In fact my setup looks to be exactly what appears in the video for part AP6023677 (capacitor) including the single wire harness with white and red wires together, each with very narrow plugs maybe 3/16". Question is do I need part AP3885081 and AP6023677? My capacitor is fried and the internals of the white "style 1" housing are fried to pieces. Thanks!
2 Answers Dom, You would only need to get the overload relay kit as the capacitor would not cause the compressor to not run. Read More...
Michael March 07, 2017 for Model Number GS6SHAXKT01 Was working on a defrost drain leak on our fridge, Whirlpool GS6SHAXKT01, cleaning it, and noticed that it has a run capacitor attached to the compressor frame but the capacitor is not connected. The compressor has never been changed but the start relay has been changed. Shouldn't the run capacitor be connected? It looks as though the wiring harness doesn't provide for connection of the cap. Thanks
1 Answer Hello Michael. On the new kits, you could hook it up or bypass it. It sounds like whoever put on the kit, bypassed it. Read More...
Maxstyles February 13, 2017 for Model Number ED5CHQXKB00 WHIRLPOOL FRIDGE I purchased compressor relay kit part 8201786 and kit states that for a 90HLP compressor I need to use overload protector part 2154697. Both overload protectors in the kit are part 2187145 with a different numbers below the part #. They are -53 ACK6AB AND -53 NAP6AB, which one do I use with my 90HLP compressor?
1 Answer Hello Maxstyles. You can use the -53 NAP6AB on the compressor. It should work just fine. Thank you. Read More...
Bigmir February 03, 2017 for Model Number Whilpool gold G15FVAXVL00 Freezer not working. Was told to replace start device and Capacitor, costing 134 dollars plus 95 installation Is Overload kit same as capacitor? Can I use this for both purposes? 8201786 Relay and Overload Kit How easy is it to install?
1 Answer Hello BigMir. No, you will need to order WPW10197428. It is not hard to replace. Just plugs onto the side of the compressor. Read More...
Scott Keith January 25, 2017 for Model Number ED5PHEXNT00 I replaced my compressor start device kit because my old one burnt. The new kit didnt have the capacitor included with it. On my old one, the black capacitor was mounted into the white start device. Do i need to replace the capacitor? On a diagram with the kit it says "capacitor optional". thank you
Jeff January 05, 2017 for Model Number ed5chq Whirlpool side by side has no other model numbers. Start relay bad part number 2220477. Will your replacement part work in it? Checked compatability and it said it would not, but part in kit looks the same.
Mark W October 29, 2016 for Model Number 2216709rel My refrigerator run capacitor only has a red, whit and green, no blue. The data sheet indicates I need a 2212193 part. What is the correct replacement part?
1 Answer Mark, The correct part for your unit would be 8201786. All parts of this will not be needed and will have instructions on which one to use for your unit. Read More...
Charles July 13, 2016 for Model Number kenmore 48262893 part # is 4sp1016 and/or 2188505 Why is it hard to get this part # 4sp1016,i see that some ebay sellers have it,sears has the new model but looks like nothing like the old one.the other part # on this relay is 2188505,when I shake it something inside rattles,does that mean it is kaput.
1 Answer Hello Charles. For the model number you provided you will need to order 8201799 for the unit. Read More...
Henry July 10, 2016 for Model Number Lg Lfx25961al /02 I watched your video through to the end and it very clear to show how to replace new start relay kit. Before I buying the replacement kit, I checked with my refrigerator have same model compressor on video but there is only have two wires attached to compressor (black wire mount to the bottom and blue wire to the left) no red wire show on video, I am not sure if it is correct assembled since it last time repaired by Sears technical.
1 Answer Henry, The part number for the overload relay on your unit will be CLS30820001. Read More...