Scott H April 17, 2015 for Model Number KBFA20ERSS01 This is the first time I think the filter has been replaced, as I have just bought this house. It looks like it was the old UKF8001AXX filter, which has been discontinued,. I have a 2 pack of the new UKF8001's and also the same issue as everyone else. The unit is making a knocking/jack hammering noise when using. The dispenser is also flowing very slowly. When it was fine before with the old filter. Guessing it is the same "fit" issue with the old filter head, but now using the new filter. What filter head is the right on for me to buy to match up with these $35 Ukf8001 filters I have now.
1 Answer Scott, With the issue that you are having, the first thing that you will want to do is make sure that you turned the filter fully clockwise to make sure it is all the way in. If it is all the way in then you will need the water filter head part number WP67004106. Read More...
Cathy March 24, 2015 for Model Number KBF520EVBL6 Hi, I want to purchase a new filter for my Kitchenaid refrigerator. The part number is 4396395. Do you have the product I need to order? Thanks.
1 Answer Cathy, based on the model number supplied the replacement filter for your model is part number EDR4RXD1. Thanks! Read More...
Dawn March 19, 2015 for Model Number GZ25FSRXYYO We are having problems with our Whirlpool Stainless Steel refrigerator. First, when we use the water dispenser, it takes FOREVER to get a glass of water. Is there a way to adjust it so it will fill a glass much quicker? Second, where it dispenses the water, the red light is always on saying - change filter, even when we just installed a new filter. Could you please tell us what might be causing the problem? Also...We enjoy using the ice from the ice maker. It was working fine and then it just stopped making ice for no apparent reason. I've checked the ice holding dish and there's no ice in it at all - so nothing is stuck. Would you have an suggestion for that issue as well? It is a Whirlpool Model GZ25FSRXYYO Refrigerator. I would appreciate any suggestions you can provide. Thank you, and have a GREAT day!
1 Answer Hello Dawn. There is no way of increasing the water from the dispenser. As for the red light, when you replace the filter, you need to press and hold the filter reset button on the dispenser to reset the light. Here is some information to help you repair the icemaker in the unit. Make sure the freezer is between 0° and 5°. You need to check and see if there is power going to the water valve when the icemaker cycles. If so, replace the water valve on the unit. If not, or the icemaker does not cycle, you will need to replace the icemaker on the unit. Also, check and make sure the fill tube on the unit is not frozen and clogged. If so, replace the water valve and thaw out the fill tube. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Donna March 09, 2015 for Model Number WRX735SDBM00 I need to replace the water filter however your site states the part # that I listed is not compatible. I need help in locating a water filter for my Whirlpool. My manual says that I need part# UKF8001AXX. Thanks
Rebekah March 04, 2015 for Model Number maytag mf12269 vem3 When I replaced the filter the water stops flowing. sometimes making a loud noise. removing the filter and installing the bypass thingy fixes the probelm. Tried the second filter I had purchased at the same time and had the same problem. The problem goes away when I remove the filter and put the blue plastic bypass knob back in. This problem appeared when I replaced the filter.
1 Answer Hello Rebekah. It sounds like the filter head and tank assembly W10502642 is bad and will need to be replaced on the unit. Read More...
1 Answer Hello Rodrigo! Yes, the filter, part number EDR4RXD1, is the correct replacement for Whirlpool 5GI6FARAF* models. Thanks! Read More...
Patty P. October 25, 2014 for Model Number MF12269VEB8 Matag Refrigerator How do I find a store in town to purchase the filter and not have to order it?
1 Answer Patty! We are unable to advise what store would have what part in stock. Sorry! Read More...
Babs October 07, 2014 for Model Number JFC2089HES I have tried to get the filter out by turning it but it does not budge. Can you help?
1 Answer Hello Babs. The only way to remove the filter from the filter head is by twisting it. Some of these can be tight and the filter head may unsnap from the unit. Just hold the head in one hand and twist the filter to remove it. Read More...
Mo September 28, 2014 for Model Number Whirlpool bottom grill refrig I am unable to push filter in so that handle can be turned clockwise..it simply will not go in or turn .. 2 different people have tried.
1 Answer Mo, The easiest way to get the filter to turn in would be to remove the kickplate and turn the filter as it will give better access. If the filter will still not go in then it is either a damaged filter or the filter housing is bad. Read More...