Dawn for Model Number GZ25FSRXYYO We are having problems with our Whirlpool Stainless Steel refrigerator. First, when we use the water dispenser, it takes FOREVER to get a glass of water. Is there a way to adjust it so it will fill a glass much quicker? Second, where it dispenses the water, the red light is always on saying - change filter, even when we just installed a new filter. Could you please tell us what might be causing the problem? Also...We enjoy using the ice from the ice maker. It was working fine and then it just stopped making ice for no apparent reason. I've checked the ice holding dish and there's no ice in it at all - so nothing is stuck. Would you have an suggestion for that issue as well? It is a Whirlpool Model GZ25FSRXYYO Refrigerator. I would appreciate any suggestions you can provide. Thank you, and have a GREAT day!
Answer Hello Dawn. There is no way of increasing the water from the dispenser. As for the red light, when you replace the filter, you need to press and hold the filter reset button on the dispenser to reset the light. Here is some information to help you repair the icemaker in the unit. Make sure the freezer is between 0° and 5°. You need to check and see if there is power going to the water valve when the icemaker cycles. If so, replace the water valve on the unit. If not, or the icemaker does not cycle, you will need to replace the icemaker on the unit. Also, check and make sure the fill tube on the unit is not frozen and clogged. If so, replace the water valve and thaw out the fill tube. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More... Answered by AppliancePartsPros.com | Thursday, March 19, 2015