Kenneth February 20, 2018 Does the hinge kit (AP4010213) come with the 2 hinges, 2 receptacles AND the interior door liner as pictured? Also, any idea when this will be in stock again? Lastly, are there any other recommended parts for making this repair? insulation etc.? Thank you, Kenneth
1 Answer Kenneth, There has been a change by the manufacturer. " A change has been implemented to the hinge and receptacle parts installed on all Single, Combo, and Convenience Wall Ovens. Existing hinge and receptacle parts will not fit on upgraded models, and new hinge and receptacle parts will not fit on old models. On the models listed in the table below, an upgraded model can be identified by a serial prefix number. When servicing models manufactured prior to the serial prefix number change, a kit consisting of the hinge and receptacle is required. When servicing models manufactured after the serial prefix number change, the hinge or receptacle may be replaced as a separate item. " We will need the model and serial number of your wall oven, in order to advise you of the proper parts to order. Thanks, Read More...
Jonathan May 10, 2017 for Model Number JJW9630DDS Is this for (2) doors or only one? If I need to do both the top and bottom do I need (2)?
1 Answer Jonathan, This hinge kit 12002468 would be for 1 door and you would need to get 2 of the hinge kits. Read More...
Adam December 16, 2015 for Model Number JJW9830DDS What is the individual part numbers for the hinge and hinge receptacle included in this kit?...is it the AP4100063 hinge receptacle and AP4101029 hinge? Also, I'm wondering why this kit would include the door panel? I thought the door not closing issue is driven by damage to either the hinges or hinge receptacles.
1 Answer Hello Adam. Sorry, there is no part number just for the hinge. They only offer the kit 12002468. Read More...
1 Answer Hello Leeland. You will need to order 74011142 for the hinge for your model. The kit will not work. Read More...
Ruth April 14, 2015 for Model Number JennAir Double Oven One of the doors on my JennAir double oven will not close properly. There is a number, #8114p955-60, but I have been told that it is not the model #. The last appliance repair man said that he could replace the door without a model number. Apparently, the manufacturer’s manual cannot be located. I did do some research and found that the previous homeowners purchased the ovens from Sears. Sears had that info in their database, but no model #. The house is going on the market, so I have to repair the door. I understand that there is a hinge kit that will fix the problem, but I don't know which one to order.
1 Answer Hello Ruth. We will need your model number to help you with this. Please call 1-877-477-7278 or post your model number with a new question on the parts page. http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...
Nancy October 17, 2014 for Model Number JMW9530DAS I have the same issue as everyone else: door won't close all the way, heat leaking out, oven light stays on. How do I determine whether I need to replace the hinges AND hinge receptacles or just the hinges? The door frame is not warped by the hinges. The door does not seal as tightly as it used to. There doesn't appear to be any visible wear to the receptacles (I haven't taken the oven out of the wall to thoroughly inspect). Lastly, the hinges do not look like they are loose or that the door is about to fall off. Looking forward to your expert advice.
1 Answer Nancy, You will want to replace both the hinges and receivers as they come in a kit which is part number 12002489. Read More...
Benny July 06, 2014 for Model Number JMW9527DAS30 Oven door and hinge not closing and have replaced hinges 2 times already. I can see the brackets are worn and my oven door is off on one side now and I can not get it to stay on. I can not find the hinge kit for my model number. Would like to order the kit ASAP. Thanks
1 Answer Hello Benny, The door hinges are part number WP74010284. Two are required so you would need to order two of these. In case the hinge receiver is the part needed, they are part number WP74011337. Two of these are required also, so you would also need to order two of these if needed. Read More...
Ralph June 12, 2014 for Model Number Jenn Air JMW8530DAB The door doesn't completely close. Am going to change the hinge and the hinge bracket. If I buy a kit, which is it: 12002489 or 12002468?
David May 05, 2014 for Model Number jmw8530das I have a sprung door on the oven of this double unit. What part do I need to get the door to close all the way? Thanks
Linden February 06, 2014 I have a JennAir model# JJW8350DDS. I am confused on which repair kit I need to fix the non-closing/light on issue. 12002468 or 12002489? Thanks
1 Answer Linden, I believe your model should read JJW8530DDS. You'll need hinge kit part number 12002468. Thanks. Read More...