Stacy July 03, 2018 for Model Number WMW31017A-1 Why does this bulb seem to go out after only a month of being used? That seems like a very short time.
1 Answer Hello Stacy, This can be due to an excess of grease/steam from the cooktop getting into the light sockets, an excessive current in the lighting circuit, or a low-quality bulb. It is really hard to say what is causing this issue without being able to make some tests on the unit. Read More...
Big Ed April 03, 2018 for Model Number MH7140XFB Bulbs on underside are elongated (5" Approx.) --in looking through questions I find all bulbs are short and install front to back as opposed to side by side (mine). What is correct bulbs for my model, and do you have them. Whirlpool is about 20 yrs old. I have been using Phillips T6.5 appliance, but they don't last too long. Help!
1 Answer Ed, for the model number you supplied [MH7140XFB], the correct replacement bulb for the interior "cavity" light and the "cooktop" light bulbs are the same part number 8206232A / 4393681 This is a 40W interior microwave light bulb. The parts are in stock and available at this time. Thanks, Read More...
Demitrius March 28, 2018 for Model Number UMV1160CS3 For the range light, can a dimmable led bulb be used in place of regular bulb?
1 Answer Demitrius, Yes an LED light bulb can be installed in place of the 40 watt incandescent hood light bulb. You wont really need a "dimmable" LED bulb. The power and illumination of the hood light is controlled through circuits on the control PCB. LED replacement bulbs are parts we do not distribute/sell. You will need to shop the local hardware store, home improvement center, etc. or on the inter net. Thanks, Read More...
Pat February 28, 2018 for Model Number wmh32517at2 The bulb in my microwave has burned out again and I cannot remove the base of the bulb from the socket. Removing the metal base of the bulb that separates from the glass head using a needle nose is impossible. There is not enough room for the handles of the pliers. The bulb is facing away from the front of the box it is built into. I am reordering 2 bulbs. I will apply some vaseline on the metal base on my new bulb when I screw the bulb.
1 Answer Hello Pat, If you unplug the unit and remove the ten screws around the perimeter of the bottom of the unit, the bottom plate will lower to provide access to the light sockets. This will allow ample room to use needlenosed pliers for removal of the base of the bulbs. If lubricant is used, I would be sure to use a dielectric such as White Lithium Grease WP20000030 to prevent the possibility of shorting the circuit and causing issues with the power supply on the board. Read More...
Angie February 21, 2018 for Model Number Whirlpool WMH31017FB-0 I have a whirlpool microwave over the stove, that I purchasejust over a year ago. the bulb blew, but when I tried to remove it, the glass portion of the bulb separated from the socket. because the angle of the bulb is on the 'shorter' side of the opening, I am having an issue trying to access the remaining part of the bulb to remove. Any suggestions? (it is just like the one in the video http://www.appliancepartspros.com/whirlpool-light-bulb-8206232a-ap4512653.html
1 Answer Angie, Once you remove power, the light lens, use a small pair of needle nose pliers, insert the end of the pliers into the remaining socket, spread the handles and turn the pliers counter clockwise, and carefully unscrew the socket. When you install the new bulb, apply a dab of dielectric grease or "vaseline" on the threads of the metal socket and screw the bulb back in, do not overtighten the bulb. return the len cover and restore power. Read More...
Jane December 20, 2017 for Model Number MH1140XMQ1 The cooktop light burned out in this microwave hood. What is the proper replacement bulb? It should have 2 brightness levels. Thank you!
Dave A. December 03, 2017 for Model Number WMH31017AS5 Can I replace the exterior bulb with an LED bulb. If so, what wattage should I use?
1 Answer Dave, If you are able to locate an LED bulb for this model then yes you could install one and it would be 40 watt bulb. Read More...
Owen Jones September 27, 2017 for Model Number model#mmv5208ws-1 maytag exterior light bulb part bumber
1 Answer Owen, The exterior light bulb (cooktop Light) for the model number you supplied is 8206232A / 8206232 Lamp 40 Watt. The part is in stock and available at this time. Thanks, Read More...
Michelle September 01, 2017 for Model Number MMV5208WS-1 I replaced the exterior light bulb with the recommended bulb but the light still won't turn on. Any ideas?
1 Answer Michelle, You will want to check to make sure that there is 120 vac going to the light socket. If it is then this will be that the bulb may not be in tight and if there is not then will most likely be a issue with the main control board on the unit. Read More...
Lowell Schmucker August 26, 2017 I need to replace the exterior light on my micro Do the lamps come in LED?? 40wt. 12 volt.
1 Answer Lowell, Unfortunately No, not from the manufacturer. If you're set on LED replacement bulb(s) you may want to check on the internet, the local home improvement center, hardware store or department store (Wal Mart, Target, etc.). Thanks, Read More...