Skip to Content

2 Day Quick Delivery!
365 Day Return Policy!
15 million satisfied customers
Over 2.1 Million Parts In Stock
Free Tech Support!
Google Trusted Store

Customer Questions and Answers for Ice Maker Assembly by Whirlpool

Best Seller

Manufacturer Part

Ice Maker Assembly

4.89 (64)

By: Whirlpool

Part Number: OEM18057270

Manufacturer Part Number: WPW10300024

The Ice Maker Assembly is an OEM part for Whirlpool refrigerators, designed to replace your fridge's original ice-making unit. This assembly is responsible for ensuring a consistent and reliable supply of ice, featuring components such as the ice mold, the water inlet valve, and the ice ejector arms.

Causes for a malfunctioning Ice Maker Assembly can range from mineral build-up in the water filter or inlet valve, to mechanical failures in the motor or electrical components.

Symptoms of a bad Ice Maker Assembly include:

Failure to produce ice
Producing smaller or misshapen ice cubes
Leaking water inside the freezer compartment
Noisy operation or strange sounds during the ice-making process

This genuine Whirlpool OEM replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Note: IF ICEMAKER IS NOT COMPATIBLE WITH UNIT ORDER ICEMAKER KIT PART# W10882923 IT COMES WITH ALTERNATE MODULE COVER AND HARNESSES PER MELODY AT WHIRLPOOL PARTS

More

$153.95

Compare At:: $236.89
You Save:: $82.94

IN STOCK

Ships Today Guaranteed

Add to Cart

Questions & Answers

For Whirlpool Ice Maker Assembly (Part Number: OEM18057270)

Mike O August 22, 2022 for Model Number G10FSAXVY011

Whirlpool french door bottom freezer with ice & water in door. The ice maker will run the auger but will not fill the water reservoir. The water in the door does run when lever depressed. I believe the correct replacement part number is WPW10300024 for the whole unit. If water in the door is flowing but water to the ice maker does not fill when wire lever is lowered does the entire unit need to be replaced or just the part necessary to open the "selenoid?".

1 Answer

Mike, Check to see if the water valve is getting 120 vac to it and if it is then replace the valve and if not replace the icemaker.

Read More...

Melanie February 15, 2022 for Model Number KFIS20XVMS5

Does this replacement ice maker come with the wiring harness or does that have to be purchased separately? Thanks in advance.

1 Answer

Melanie, It appears that the harness does not come with this icemaker and will need to be purchased separately. The part number for the harness is W10312698.

Read More...

Tim November 24, 2021 for Model Number WRX735SDHV00

the customer complained of no ice. I replaced the water inlet valve and the ice maker assembly. 24 hrs later, there is still no ice. the new ice maker didnt come with a new wire harness, Im wondering if thats where the problem is. the water in the door works fine, the auger motor works fine. thanks for your help

1 Answer

Tim, It would be recommended to check and make sure that the fill tube that supplies the icemaker is not frozen which could have been caused by a faulty water valve.

Read More...

Donald Roper March 03, 2021 for Model Number Whirlpool WRX735SDHZ00

My icemaker stopped making ice. Its a Whirlpool French door Refrigerator with the Center drawer (WRX735SDHZ00 ). Right before it stopped working It was making small and large pieces of ice at the same time but then stopped. I thought the water supply tube was clogged or frozen so I took a hair dryer and heated up the area where the icemaker is. I put the ice bin back in and heard water going into the icemaker. A little while later the icemaker dumped ice and again some of them were tiny and some were oversized. It cycled all several times that night but made very little ice. The next day it made a little more then it quit again. Again I grabbed a hair dryer and defrosted the line and it started making the malformed ice again. I was thinking the tray was blocked so I took the Ice maker out and check it and I didn't find a blockage in the tray. BTW, the light for the middle drawer appears to be bad UNTIL I put the icemaker back and then the light came on. As I pushed the ice maker further into the slot the light started strobing and then went back out. Is it the Ice Maker, the Thermostat or the Control Panel?

1 Answer

Donald R, Based on the information provided your refrigerator has self-diagnostics, I would start by locating the tech sheet that the manufacturer packaged with the refrigerator and follow the directions for the service test. This will likely lead you to the issue at hand.

Read More...

Teacher4kids January 29, 2021 for Model Number WRX735SDBM00

I recently received a replacement ice maker. The original part W1037752 was replaced with W10300024. The problem I have is I do not have the correct wiring harness to hook up the new ice maker. Could you tell me what wiring harness I need? Many thanks

1 Answer

Hello Teacher4kids, When I looked up your model number, part W10882923 came up as the icemaker. This icemaker comes with the instructions and the two possible wiring harnesses. The instructions will explain which harness to use and how to install it.

Read More...

Teacher4kids January 29, 2021 for Model Number WRX735SDBM00

Model number for Whirlpool French Door Refrigerator WRX735SDBM00 Thanks!

1 Answer

Hello T4K, not sure what your question is, but if you need the ice maker it is now a kit from the manufacturer, part W10882923.

Read More...

Teacher4kids January 29, 2021 for Model Number Whirlpool Ice maker W10300024

Hi! I recently received a replacement ice maker for my whirlpool fridge. The original model # W1037752 was replaced with W10300024. The problem I have is I do not have the correct wiring harness to hook up the new ice maker. Could you tell me what wiring harness I need? Many thanks!

1 Answer

Teacher4kids, if the model number of your appliance could be provided in a new question, this will allow the most accurate information to be presented.

Read More...

Brantley June 23, 2020 for Model Number JFI2089WES8 with W10300024 icemaker

In removing the icemaker I failed to unplug the 4 wire plug from it and as a result pulled 3 of the wire out of the connector leaving only the black wire in tact. How can I get a new connector and what is order for the wires to be reconnected? Thanks, Brantley

1 Answer

Hello Brantley, the manufacturer only supplies the connector as part of the ice maker wiring harness, part W10312698.

Read More...

Mark May 28, 2020 for Model Number WRX735SDHZ00

My ice maker bin had water/pool ice at the bottom in addition to slow ice production. I pulled out the unit to clear the ice maker out. Now it is not working at all.

1 Answer

Hello Mark, If the icemaker is not filling with water you will need to make sure the fill tube is not frozen. This would be another thing that would cause the water in the ice container. You will need to replace the water inlet valve W11043013 in this case.

Read More...

Bob May 16, 2020 for Model Number WRX735SDHZ00

My ice maker does not appear to cycle enough. Ice bin was empty last night but only made 1 batch by morning. I hear the Ice dump and water refill, but takes forever to dump again. Can you adjust frequency?

1 Answer

Hello Bob, there is no adjustment to speed up ice making, since the ice maker did harvest and refill then electrically it is working , the problem may be getting the ice maker to get cold enough fast enough, behind the ice maker there is an auxiliary ice fan that helps with this, if you do not hear it running it would explain the problem also the freezer should be at 0-5 deg.

Read More...

Have questions? Ask our pros!

Contact us in a way that is convenient for you

Call us 1-877-477-7278

Need Help? Chat with a Pro

Or ask a question by filling in the form

Share your thoughts with other customers

Over 2.1 Million Parts In Stock
2 Day Quick Delivery!
365 Day Return Policy!
Free Tech Support!
Google Trusted Store