Range / Cooktop / Oven Housing Or Cover

This oven light cup is the interior housing that supports and shields the oven lamp and lens. Replacing a damaged cup keeps the light assembly secure and properly aligned so you can clearly see inside the oven during cooking.

• Mounts inside the oven cavity to support the light assembly
• Shields the lamp area from heat and splatter
• Provides the proper seat/retention for the light lens/cover
• Common symptoms: light cover won't stay in place, light assembly feels loose, visible damage or missing cup

• Disconnect power at the breaker and allow the oven to cool completely before servicing
• Remove oven racks for access
• Remove the lens/cover and bulb to access the cup; transfer and reuse existing fasteners
• Ensure the cup is fully seated and oriented correctly before restoring power

This replacement cover closes and protects a designated opening or component in your appliance. It restores a secure fit and proper protection when the original cover is cracked, missing, or warped, helping maintain safe, reliable operation.

• Shields internal parts from debris and accidental contact
• Helps maintain the designed enclosure for correct performance
• Can reduce vibration or rattling caused by a loose or damaged cover
• Common symptoms: visible cracks, broken/missing tabs, loose fit, or the area left exposed

• Disconnect power and, if applicable, turn off water before servicing
• Access and fastener style vary by model; refer to your parts diagram
• Reuse original screws, clips, or seals unless you are replacing them
• Seat the cover evenly; ensure all tabs engage and avoid overtightening fasteners

This outer housing cover replaces a damaged or missing trim piece to protect internal components and restore the appliance's finished appearance. It fits as the exterior cover piece found on the original unit. What it does:

• Protects internal components from dirt, spills and accidental contact
• Conceals wiring and mounting points for a clean, finished look
• Prevents small items from entering sensitive areas that could cause faults
• Restores appearance after panel damage or wear

• One outer housing cover

• Disconnect power to the appliance before starting any service
• Follow the manufacturer's service instructions and keep track of fasteners
• Use basic hand tools; avoid flexing the part to prevent cracking

This back cover is the rear panel that protects a range or oven's internal components and wiring, helping keep debris and heat away from sensitive parts for safer, more reliable operation. What it does:

• Shields control modules, wiring, and electrical connections from dust, spills, and physical contact
• Helps contain and direct appliance heat and airflow away from external surfaces
• Reduces risk of accidental contact with live components for improved user safety
• Prevents debris buildup that can lead to malfunctions or odor issues

• One back cover

• Disconnect power (unplug or switch off breaker) before removing or installing the cover
• Remove screws or fasteners securing the old panel; keep hardware for reuse only
• Watch for sharp edges; wear gloves to protect your hands
• Reinstall all fasteners securely and restore power; test appliance function after installation

A replacement glass turntable plate that restores a microwave's rotating cooking surface for even heating and stable cookware support. Fits on the drive roller to provide a flat, heat-safe surface for daily microwave use. What it does:

• Replaces a cracked, chipped or missing glass turntable so food heats more evenly
• Provides a stable surface for plates and bowls to rotate during cooking
• Works with the turntable roller and coupling to restore proper rotation
• Prevents wobble and scraping that can occur with damaged glass

• Unplug the microwave or disconnect power before installing
• Handle the glass carefully to avoid cuts; do not install if chipped or cracked
• Align plate on the center drive coupling/roller support; it seats and rotates freely
• Use only the exact OEM plate size and part number to ensure proper fit

A replacement burner valve cover that protects and conceals the gas valve assembly on compatible ranges, helping keep valve components clear of spills and debris for more reliable burner operation. What it does:

• Covers and protects the gas valve area from food, moisture and spills.
• Helps prevent debris from interfering with valve knobs and internal valve parts.
• Can reduce intermittent ignition or burner performance issues caused by contamination.
• Restores the finished appearance around the valve for safer, cleaner operation.

• Always shut off the gas supply and unplug the appliance before servicing.
• Use basic hand tools; handle the valve area gently to avoid disturbing fittings or tubing.
• After installation, check for gas leaks with a soapy-water solution or a proper leak detector—do not use an open flame.

This door hinge cover shields and protects the refrigerator hinge area from dirt and damage while giving the hinge a finished appearance. Replaces a worn, cracked, or missing cover to restore proper fit and appearance. What it does

• Covers and protects the door hinge assembly from debris and accidental contact
• Helps maintain a finished look by hiding hinge hardware and mounting fasteners
• Prevents sharp edges from being exposed, reducing snag and scratch risk
• Commonly replaced when cracked, broken, or missing after impact or wear

• One door hinge shield

• Remove power and open the door before servicing to prevent injury
• Typically installs with a few screws or clips—retain original fasteners unless replacement specified
• Handle part carefully to avoid scratching painted surfaces; align shield before tightening

This evaporator fan cover protects the refrigerator evaporator fan assembly and helps direct airflow for proper cooling. It's a molded replacement part that restores the original airflow path and prevents debris contact with the fan. What it does:

• Shields the evaporator fan and motor from ice buildup and loose debris
• Directs airflow across the evaporator for even cooling in the freezer compartment
• Helps reduce fan noise by stabilizing airflow around the fan housing
• Commonly replaced when cracked, broken mounting tabs are present, or airflow is obstructed

• One fan cover

• Disconnect power before accessing the evaporator compartment to avoid shock and fan injury
• Remove food and evaporator access panels per model service instructions before replacing the cover
• Handle clips and mounting tabs gently—use proper fasteners if any original hardware is damaged
• If you encounter ice buildup on the evaporator, fully defrost and address the underlying cause before reassembly

This is a replacement grease tray cover that restores the oven/cooktop drip area to help contain grease and protect the tray below. It improves grease containment and keeps the cooking area looking finished. What it does:

• Covers the grease collection area to help contain drips and splatters
• Helps prevent grease from pooling on the tray and reduces cleanup
• Restores a damaged or missing cover so the appliance looks and functions correctly
• Can reduce smoke and odors caused by exposed grease buildup

• One grease tray cover

• Ensure the appliance is completely cool and power/gas is turned off before starting
• Remove the old cover and clean the tray area; use gloves to handle greasy parts
• Align the new cover with the tray opening and seat it in place per the appliance instructions

This OEM part is a griddle cover made for stoves. A griddle cover is a metal piece that can be placed over the stove's burners to be used as a cooking surface. If a griddle cover becomes damaged due to excessive use, it can become ineffective and need to be replaced. Luckily replacing a griddle cover is a very simple process.To replace the griddle cover, make sure the stove is unplugged. Being by lifting the old cover out of its place by pushing it forward and lifting upward to release it from its attachment on the stove. Once removed set it off to the side. Next, proceed to take the new cover and place it back where the old one was while making sure it locks into its attachment. Once secured, turn the power back on to the appliance.This genuine replacement part is sold individually and is compatible with Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Sears/Kenmore brand stoves.

This carton cover thermostat senses temperature in the refrigerator carton/cover area and signals the appliance control system so temperature-related components operate correctly. It helps maintain proper temperature response for defrost and ice-related functions. What it does

• Detects temperature at the carton/cover location and provides an electrical signal to the control system.
• Helps ensure timely activation/deactivation of temperature-dependent systems (defrost, ice-making components).
• Commonly replaced when temperature-related functions are inconsistent or intermittent.
• Can restore normal cycling when a failed thermostat causes improper temperature readings.

• One carton cover thermostat.

• Disconnect power to the appliance before beginning work to avoid electrical shock.
• Verify exact wiring and terminal locations against the appliance service sheet; confirm continuity before and after replacement.
• Replace only with correct OEM-designated thermostat and secure in the original clip or mounting location.

This access panel cover secures and protects internal components behind an appliance opening, keeping parts safe from dust and preventing accidental contact. It restores the appliance's finished appearance and helps maintain proper airflow around covered areas. What it does:

• Shields wiring and components from dirt, dust and accidental contact
• Helps prevent small items from entering service areas
• Restores a clean, finished look to the appliance exterior or interior
• Supports safe airflow patterns when installed as intended

• One replacement cover

• Disconnect power before servicing; follow all safety guidelines for your appliance
• Typically secures with screws or clips—retain original fasteners or use OEM replacements
• Align cover to mounting points and fasten evenly to avoid gaps or stress