Refrigerator Manual, Care Guide

This replacement energy guide label displays an appliance's estimated energy use and efficiency details so buyers and service techs can identify energy information at a glance. It restores missing or faded factory labeling for accurate reference. What it does:

• Shows estimated annual energy consumption and efficiency info printed on the factory label
• Restores missing, damaged, or unreadable energy labeling so information is visible again
• Helps verify energy-related specs when selling, servicing, or assessing an appliance
• Adhesive-backed for direct application to the appliance surface

• Clean and dry the surface thoroughly before applying to ensure good adhesion
• Peel backing and press label firmly in place, smoothing out any air bubbles
• Handle by the edges to avoid fingerprints or contaminating the adhesive

This replacement Energy Guide label restores the appliance's manufacturer energy-use information so estimated yearly energy consumption and cost are readable for buyers and service techs. It replaces a missing, damaged, or illegible label. What it does:

• Displays the appliance's estimated yearly energy use and estimated annual operating cost in consumer-friendly format
• Restores required manufacturer energy information when the original label is torn, faded, or unreadable
• Helps shoppers and technicians quickly see efficiency info without electronic diagnostics
• Simple, non-electrical cosmetic replacement — does not affect appliance performance

• Clean and dry the mounting area; remove oils or residue before applying
• Peel backing and align the label carefully; press firmly to ensure full adhesion
• Single-use adhesive — avoid repositioning after initial placement
• Not an electrical component; no tools or wiring required

This Energy Guide replacement label shows an appliance's estimated energy use and efficiency information so owners and buyers can compare operating costs at a glance. It's a direct cosmetic replacement for worn or missing factory labels. What it does:

• Displays estimated annual energy consumption and cost information printed per manufacturer specs
• Restores the factory information panel used for energy-efficiency comparisons
• Helps ensure appliances retain the required user-facing energy label for resale or inspection
• Serves as a cosmetic and informational replacement only — does not affect appliance operation

• One printed Energy Guide label

• Clean and dry the mounting surface before applying to ensure adhesion
• Align carefully and press firmly; replace only on exterior surfaces designed for labels
• Do not apply over ventilation openings, controls, or safety warnings
• This is a non-electrical cosmetic replacement; no tools or electrical work required

This replacement Energy Guide label is the factory-style rating sticker that displays estimated energy use and efficiency info for your appliance. It restores missing or damaged labeling so efficiency details are visible for homeowners or buyers. What it does:

• Replaces the original Energy Guide rating sticker that shows estimated energy consumption and efficiency.
• Helps make appliance energy information readable and compliant with resale or inspection needs.
• Useful when the original label is torn, faded, or removed.
• Provides a direct visual reference for comparing operating costs.

• Surface-mount sticker — clean and dry the application area before installing.
• Peel backing and firmly press in place; avoid stretching or repositioning once applied.
• No tools or electrical work required.

This replacement Energy Guide label restores the factory energy-use information printed on the appliance so you can read estimated yearly energy consumption and cost at a glance. It's a simple cosmetic and informational replacement when the original label is missing or damaged. What it does:

• Displays estimated yearly energy use and estimated annual operating cost in a readable format
• Replaces missing, torn, faded, or illegible factory energy guide stickers
• Helps you identify the appliance's rated energy figures without needing paperwork
• Intended for interior or exterior application where the original guide was mounted

• Clean and dry the mounting surface thoroughly before applying for best adhesion
• Peel backing and press label firmly; align carefully—adhesive is permanent
• Avoid placing over vents, controls, or gasket areas that affect operation
• No special tools required;

This Energy Guide label replaces a missing or damaged manufacturer energy information sticker so buyers can see estimated energy use and comparison details. It's a simple replacement for appliances that need a readable energy-rating label. What it does:

• Provides the appliance's energy-use and efficiency information in the manufacturer's Energy Guide format
• Restores the visible energy-rating label used for consumer reference and comparisons
• Useful when the original label is peeled, faded, or unreadable
• Helps owners during inspection or resale

• One replacement Energy Guide label

• Clean and dry the mounting surface before applying the label
• Peel backing and press label firmly to a flat surface; avoid stretched or wrinkled application
• Do not cover the label with tape, insulation, or panels that obscure information

This is the appliance energy guide label — the printed sticker that shows estimated annual energy use and cost in plain, easy-to-read numbers. Replace a missing or damaged label so the appliance's energy info is visible. What it does:

• Displays the appliance's estimated annual electricity usage and estimated yearly operating cost.
• Provides the standardized energy information consumers use to compare efficiency.
• Useful when the original label is torn, faded, or unreadable.
• Helps restore on-appliance information that is normally visible to buyers and service techs.

• Clean and dry the mounting surface before applying; adhesive is single-use.
• Peel backing and press firmly, smoothing out air bubbles for best adhesion.
• Do not place over vents, controls, or seals; position where the label will remain visible.

This is an energy guide label — the adhesive information sticker that lists estimated energy use and efficiency info for the appliance. It replaces a missing, damaged, or unreadable factory label so specs remain visible. What it does:

• Provides the official energy-use and efficiency information typically displayed on the appliance
• Restores a missing or worn label so estimated energy details are visible for owners
• Helps meet visible labeling expectations during resale or service inspections
• Serves as a direct replacement for a factory-applied information sticker

• One adhesive energy guide label as shown

• Clean and dry the mounting surface before applying; remove any residue or old adhesive
• Peel backing and firmly press label onto a smooth, flat area; avoid curved or textured surfaces for best adhesion
• Do not stretch or fold the label when applying
• No electrical or disassembly steps are required; if label is behind a trim piece that must be removed, follow manufacturer service instructions

This genuine replacement Energy Guide label clearly displays an appliance's estimated energy use so owners can compare efficiency and restore factory labeling. Ideal when the original yellow energy rating label is missing or damaged. What it does:

• Shows estimated annual energy use and comparative efficiency information
• Restores the appliance's factory energy labeling for resale or reference
• Helps users compare operating cost expectations between models
• Replaces a missing, torn, or faded Energy Guide label

• Clean and dry the application surface before installing for best adhesion
• Peel backing and press label firmly in place, smoothing out any air bubbles
• Position label where it is visible and will not interfere with controls or ventilation