Refrigerator Manual, Care Guide

This is the replacement Energy Guide label that shows an appliance's estimated annual energy use and operating cost in plain language, helping end users verify or replace a missing or damaged rating label. What it does:

• Displays estimated annual energy consumption and estimated yearly operating cost information
• Restores the factory energy-rating label that is typically mounted on the appliance exterior or inside the door
• Helps technicians and owners confirm energy-use information after repairs or panel replacement
• Provides a clear, legible rating for resale or inspection purposes

• Clean and dry the mounting surface; remove loose paint, dirt, and grease before applying
• Align the label, peel backing, and press firmly from one edge to the other to avoid air pockets
• Allow adhesive to set; avoid scrubbing or exposure to water for 24 hours after application

This is a replacement parts catalog — a printed service parts list that helps identify parts and part numbers for repairs. Good for technicians and owners who need an accurate parts reference. What it does:

• Lists appliance parts with reference numbers and illustrations for identification
• Helps you find the correct part number before ordering replacements
• Useful for diagnosing which components are related to a symptom
• Provides an organized parts breakdown for service planning

• No installation required; reference document only
• Keep in a dry, accessible place for service use
• If using during repairs, follow appliance safety guidelines and disconnect power before servicing

This is a replacement energy label that restores the factory energy-use information and product ID on your appliance. It keeps important efficiency and rating details visible for reference or resale. What it does:

• Replaces a missing, torn, or faded energy guide label so energy-use info is legible
• Restores factory rating and identification details required for reference
• Helps maintain appliance appearance and resale value by providing original labeling
• Useful when the original label is damaged during moves or service

• One replacement energy label

• Clean and dry the mounting area before applying for best adhesion
• Peel off backing and press label firmly in place; avoid repositioning after contact
• Remove old adhesive residue first; use an appropriate adhesive remover if needed
• No electrical work required — install is a surface-adhesive task

This replacement energy label is the factory rating decal that displays the appliance's energy and model information. It restores the original on-appliance labeling so energy ratings and factory details are readable. What it does:

• Replaces a missing, torn, or faded energy/rating sticker
• Restores visible energy-consumption and manufacturing information used for service or resale
• Helps owners rated performance and product ID on the cabinet
• Improves appliance appearance and compliance with visible labeling needs

• Clean and dry the surface thoroughly before applying; remove any old adhesive residue
• Peel backing and firmly press decal into place, smoothing out air bubbles
• Apply only to flat, accessible areas as originally located by the manufacturer
• Avoid high-heat cleaning or abrasive solvents on the decal after installation

This is an appliance energy label that replaces a missing or damaged Energy Guide sticker, restoring the unit's official energy use and rating information for identification and resale purposes. Easy to apply to clean surfaces. What it does:

• Displays manufacturer energy rating, estimated annual energy use, and required regulatory information
• Helps appliance energy performance and compliance when original label is unreadable or removed
• Useful for resale, inspections, or when matching unit documentation
• Replaces worn, torn, or illegible factory labels

• One energy label sticker

• Clean and dry surface thoroughly before applying to ensure good adhesion
• Align carefully; peel-and-stick application is permanent and difficult to reposition
• Avoid placing over control panels, vents, or moving parts
• Follow local regulations regarding placement and retention of energy labels

This replacement energy label restores the factory efficiency and rating information that appears on your appliance. It keeps energy use and model-specific efficiency details visible for reference, resale, or regulatory compliance. What it does

• Displays official energy consumption and efficiency information so usage and ratings remain readable
• Replaces torn, faded, missing or illegible factory labels
• Helps satisfy disclosure needs for resale or service checks
• Makes it easy to verify appliance energy details at a glance

• One replacement energy label

• Clean and dry the mounting area before applying to ensure good adhesion
• Align the label carefully before sticking; press firmly to remove air bubbles
• If original label residue remains, remove residue first with a non-abrasive cleaner
• Handle with care to avoid creasing or contaminating the adhesive

This energy label is the factory sticker used to display official energy usage and efficiency information on the appliance. It helps owners and service techs rated energy data and regulatory details at a glance. What it does:

• Provides the manufacturer's official energy and efficiency information for the appliance
• Identifies rated energy consumption, efficiency classifications, and other regulatory data
• Helps appliance specs during service, inspections, or resale
• Restores the original factory labeling when the previous label is missing or damaged

• One replacement energy label sticker

• Clean and dry the surface thoroughly before applying to ensure proper adhesion
• Align carefully; label is adhesive-backed and designed to be applied directly to the appliance cabinet
• Use mild soap and water for surface prep; avoid solvents that may damage finishes
• For safety, disconnect power to the appliance before performing any service that requires opening panels near the label area