Remington Gasket & Seal

This dipstick oil fill o-tube ring is a genuine MTD part. It is manufactured as a replacement part for various push walk-behind mowers, self-propelled walk-behind mowers, tillers, snowblowers, leaf blowers, log splitters, wood chippers, and other small engines.This part is used to check the level of oil in these machines. Dipstick o-rings especially may become too dirty or damaged to be useful anymore. They may also become lost or damaged. Being able to check the oil is an important maintenance step, so this part must be replaced if necessary. This is a genuine OEM part sourced directly from the manufacturer and sold individually. It is compatible with machines made by many brands, including Huskee, Husky, Yard Machines, MTD, Remington, Yard-Man, Cub Cadet, Craftsman, and MasterCut.

This replacement part is an oil seal. This is a genuine replacement part made by MTD. This part is used to ensure that oil and other fuel cannot escape from the tank. The seal prevents it from leaking during use to ensure the engine is able to run properly. A new oil seal might be needed if the current one has been damaged. If the seal is worn down and thinner than before, it can cause leaks and oil waste. If this is the case, the seal should be replaced immediately. Oil leakage can cause other issues within the machine. Refer to the owner's manual for more information on how to replace this part. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This part is a replacement intake valve seal. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. The intended use for this part is to properly replace a defective or worn intake valve seal in outdoor power equipment.The intake valve seal prevents leaks and seals the intake valve, which can be found inside the engine housing. Valve seals should be checked regularly and replaced if worn, brittle, broken, or ineffective in any way. Always ensure that the equipment is completely powered off and is cooled down before attempting to start the repair process. For more accurate information on the installation of this particular intake valve seal, reference the owner's manual or equipment diagrams for specific instructions and part location. This is an authentic OEM part and as such is sold individually and made from durable and high-quality materials. This intake valve seal can be used with a variety of outdoor power equipment models manufactured by MTD, Craftsman, and other brands.

This replacement part is an intake valve seal. It is a genuine replacement part made by MTD. This intake valve seal is able to close the valve in the machine or appliance so that air of fuel cannot escape during use. This part is essential to the overall operation of the machine. A new intake valve seal might be needed if the current one is allowing for air or fuel to escape during use. This can cause additional problems within the machine in general. Be sure the engine is completely powered off and cooled down before attempting to replace this part. Reference the appropriate user manual for more information. This is a genuine OEM replacement part. This intake valve seal is sold individually and is sourced directly from the manufacturer to ensure a proper fit and long-lasting use.

This replacement part is an oil seal. This part is small but important in various types of machines that rely on oil to run. The oil seal is found near the fuel tank and ensures that there are no leaks. If the machine is leaking oil, it can be due to a damaged oil seal. Seals like this one can wear out over time or be knocked out of place by impact.This is a genuine OEM replacement part manufactured by MTD. This part is sold individually.

Cylinder head gaskets provide a seal between the engine block and the head that caps the cylinders. They ensure that the cylinders, oil, and cooling channels are isolated from one another and contain the pressure in the engine. If there is a problem with a gasket, it could result in overheating, white smoke from the exhaust, and leaks.The cylinder head gasket undergoes a lot of stress when the engine is running. Over time, the gasket can start to wear down, crack, and break. Owners will want to replace the gasket to ensure the machine is running properly and efficiently. Replacing the cylinder head gasket can be a large job even when working on a small engine.This cylinder head gasket is used in engines from a range of manufacturers including MTD, Craftsman, Columbia, Yard Machines, Cub Cadet, and Troy-Bilt. The gaskets are OEM parts sourced from the manufacturer. Each of the gaskets is sold individually.

This crankcase cover gasket can be used as a replacement part for lawnmowers, lawn trimmers, chipper shredders, edgers, tillers, and log splitters. It is the component responsible for sealing the crankcase of the engine and protecting it from accumulating dirt and debris from the outside and from leaking oil from the inside.When damaged, crankcase cover gaskets can hamper their ability to seal the crankcase, thereby letting in dirt and debris or letting out engine oil. Look for cracks, tears, punctures, piercings, or erosion of the metal material. If the crankcase cover gasket is compromised, it must be removed and replaced immediately before the appliance can be used again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This crankcase cover gasket is a genuine OEM part sourced from MTD. It is sold individually. It is compatible with the following brands: MTD, Cub Cadet, Craftsman, and Yard Machines.

This is a muffler gasket that is located between the engine exhaust and the exhaust system in various types of lawn and garden equipment. When the muffler gasket is in good shape, it prevents exhaust from leaking out of the tool. It comes with a substantial amount of flexibility so that it can expand in the presence of heat. The main task of the muffler gasket is to prevent leaking. If the gasket is damaged or broken, the exhaust may leak from the joint.A muffler gasket can fail due to many situations. It can dry out, lose its flexibility, or develop cracks or holes. Sometimes the muffler gasket will chafe and lose its resistance to heat so it dries out. Muffler gaskets can also tear due to the intense vibrations from equipment. The gasket will need to be replaced by taking out the engine and switching the muffler gasket for a new one.This is a genuine OEM replacement muffler gasket that is sourced directly from the manufacturer. It is sold as an individual part. The gasket can be used in lawnmowers, tillers, string trimmers, edgers, log splitters, and wood chippers manufactured by Cub Cadet, Craftsman, and MTD.

This replacement part is an external gasket kit, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. This gasket kit is different from typical gasket kids as they are used on the external side of the engines. These gaskets are still very important to the engine as a whole and allow it to run smoothly during use.A new external gasket kit might be needed if the current one is broken or damaged. If there are noises coming from inside the machine it is possible that the parts of the gasket are out of place or could be malfunctioning. Be sure the engine of the appliance is completely powered down and cooled off before replacing the gasket kit as this area can be hot from use.Be sure to reference the specific user manual prior to beginning this repair. Note that this is a genuine OEM replacement part and is told individually. This part is sourced directly from the manufacturer.

This breather gasket easily replaces old, worn-out gaskets to ensure the utmost efficiency of relevant outdoor power equipment.A worn out or deteriorated breather gasket can cause a number of issues such as high-idling and oil leaks. As breather gaskets age, they will need to be replaced. Breathers need to function properly, as they are critical for relieving engine pressure and reducing buildup of harmful materials within the engine. This breather gasket is a genuine OEM replacement part and has been sourced directly from the manufacturer. This replacement breather gasket fits various different models of MTD, Cub Cadet, Yardman, Husky, and Troy-Bilt outdoor power equipment such as lawn mowers and trimmers. Please note this breather gasket is sold individually.