Remington Carburetor

A carburetor is responsible for combining fuel and air into the right combustible mixture. When it is malfunctioning, there are several warning signs to look out for. These include poor fuel economy, rough idle, flooding, and engine misfire. Installing a brand-new carburetor can help. A carburetor replacement is easy and starts with turning off the lawnmower. Open its air filter cover and use a screwdriver to remove the air filter base. Once detached, disconnect the throttle cable and fuel line. Place the new carburetor and connect the fuel line and the throttle cable. Put back the air filter base. This is a brand-new and original MTD carburetor. It is compatible with tillers, leaf blowers, and string trimmers from MTD, Bolens, Craftsman, Troy-Bilt, Yard-Man, and Yard Machines. This carburetor is fully assembled and sold individually. Additional carburetor gaskets are sold separately.

This carburetor is a device for supplying a two-cycle engine with a mixture of air and fuel. This part comes pre-assembled and has a plastic choke lever along with a metal body. The primary purpose of a carburetor is to mix the right amount of fuel with air so that the engine runs properly. If enough fuel is not mixed with the air, the engine runs lean and can either stop running or gets damaged. On the other hand, if too much fuel is mixed with air, the engine runs rich, and it either floods, runs poorly, runs very smoky, or wastes fuel. The carburetor is in charge of getting the right mixture. If the carburetor is clogged, the engine will not get enough fuel. It may not start or may run rough. The procedure to replace the carburetor is quick and easy, taking only around 15 minutes, but it is recommended to work in a ventilated area. This carburetor works with outdoor power tools like the trimmer, leaf blower, and tiller. It is compatible with specific products from popular brands like Craftsman, MTD, Murray, and Troy-Bilt. It is sold individually and is supplied directly from the original equipment manufacturer.

This carburetor assembly is a genuine MTD part, sold individually. This carburetor assembly can be used as a replacement part in a variety of outdoor appliances including lawn mowers, string trimmers, and edgers. The purpose of a carburetor assembly for one of these outdoor appliances is to prepare a mixture of fuel and air in the proper ratio so that the mixture can be fed into the spark plugs to ignite them and to power on the engine as a result. If the engine is not starting, is hard starting, or if the spark plugs are not igniting properly, the carburetor may be damaged and will require replacement.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This carburetor assembly is compatible with the following outdoor appliance brands: MTD, Craftsman, Toro, Cub Cadet, Troy-Bilt, Murray, Yard Machines, Huskee, Bolens, Yard Man, and MasterCut.

This replacement part is a carburetor kit. This is a genuine replacement part made by MTD. This kit is used in many types of machinery and works to ensure that the engine is running properly during use.A new carburetor kit might be needed if the current one is damaged is misplaced at all. This can be due to a single incident or from normal wear and tear. If the engine is struggling to start, it can be due to a faulty carburetor kit. Be sure the engine is completely turned off before attempting to replace this part. Work gloves are also recommended when working near or around the engine. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

This carburetor is a genuine MTD part, sold individually. This carburetor can be used as a replacement part in a chainsaw. The purpose of a carburetor in a chainsaw is to filter the mixture of air and fuel so that the two are combined in the proper ratio required to ignite the spark plugs and, in turn, power the appliance.If the engine is hard starting, demonstrating unusual noises such as clicking, crackling, or buzzing, or the engine will not start at all, it is likely that the carburetor has suffered some form of damage and will need to be removed and replaced by this genuine OEM replacement part in order to guarantee safe use of the appliance. Always unplug the appliance before performing any kind of repair or replacement.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This carburetor is compatible with the following outdoor appliance brands: MTD and Craftsman.

A gas powered engine often requires priming before it can run, which means injecting some of the fuel into the engine's carburetor. Here, a careful balance of air and gas will receive a spark that causes combustion. The most common way to prime an engine is to use a primer assembly that is activated by a bulb that is pressed to create suction and draw fuel into a reservoir or carburetor. This replacement fuel bulb is for snowblowers that rely on gas powered engines to run. The fuel bulb is very flexible and made to endure seasonal conditions. It works with Craftsman, Yard Machines, MTD, Troy Bilt, and Bolens snowblowers. This is an OEM replacement part that fits into the cover assembly and which requires only a wrench to replace and install. It is sold individually, and other components of the priming assembly may be needed.

The primer bulb is a small plastic piece that will draw fuel from the fuel reservoir and into the carburetor when it is pressed down. This ensures that the fuel can get into the carburetor so that combustion can happen in the engine. If the primer bulb is broken or damaged on the engine, it will mean that the carburetor will not be getting the fuel it needs to get the engine to start. In some cases, the engine might not start at all. Other times, it might take a while to get the engine to start. These could indicate that it is time to replace the bulb. This is an OEM replacement part that is sold individually. It will work with lawnmowers and other types of small engines. The bulb is compatible with a range of different popular brands including Toro, Kawasaki, Cub Cadet, MTD, and Craftsman.

This genuine MTD carburetor assembly provides all of the components to replace a carburetor, including the fastening elements. The purpose of a carburetor is to combine the fuel and air intake into a particular ratio that is ignited by the spark plugs to run the engine. This carburetor assembly contains the carburetor itself and the primer bu. The carburetor assembly might have to be ordered as a complete replacement if there is damage to the carburetor that also affects the fastening parts that attach the carburetor to the engine. If the damage cannot be attributed to a smaller part, the full carburetor assembly should be ordered as a replacement for the damaged carburetor and its attachments. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This carburetor assembly is compatible with log splitters and chipper shredders made by the following brands: MTD and Cub Cadet. This part is sold individually.

This part can be used to replace a deteriorating or broken throttle linkage spring, which helps to regulate the speed of outdoor power equipment.As throttle linkage springs age they begin to wear out or can easily break. This can cause serious problems with regulating the speed of outdoor power equipment such as lawn mowers and trimmers. A broken or weak throttle linkage spring will stop the throttle on the equipment from returning to the off or resting position when the throttle is released. This can be dangerous. This throttle linkage spring is a genuine OEM replacement part that has been sourced directly from the manufacturer. This replacement throttle linkage spring fits various different MTD, Cub Cadet, Craftsman, and Troy-Bilt models of lawn mowers, log splitters, and trimmers. Please note that this part is sold individually.

This non-vented primer assembly is a replacement part that can work with a range of lawn and garden equipment. This assembly features the push-bulb that is used to create a vacuum that draws fuel into the carburetor, so it can help to start the engine. If the primer assembly is damaged, it will not create a vacuum to pull the fuel from the tank. This can result in equipment that does not start.The primer assembly is made from plastic and rubber. Although it is built to last, it can wear down. The bulb might crack, or it might not connect correctly, for example. If there are any issues with the primer assembly, the part should be replaced right away.The non-vented primer assembly will work with select models of trimmer and mower from Yard Machines, Husky, Troy-Bilt, and MTD. This assembly is sold individually. It is an authentic part that has been sourced from the OEM.

This carburetor repair kit is a genuine OEM replacement part for a wide variety of tiller and chipper engines. The carburetor is one of the most essential parts of an engine. It is responsible for mixing a balance of oxygen and fuel for combustion. If the carburetor is damaged, the engine will not produce the right about of combustion and may not start. This kit is for service the carburetor if it becomes damaged. This kit contains a valve needle, jet nozzles, a float and float pin, o-rings and gaskets, and fuel drain plug—everything needed to fix a carburetor. To make repairs to the carburetor, you will need a set of screwdrivers and socket wrenches. The repair will depend largely on what appliance you are fixing, so be sure to follow the instructions in the user's manual. Before making any repair, be sure to allow the engine to cool completely and drain it of excess fuel. This part is designed for tiller and chipper engines made by Cub Cadet, MTD, Troy-Bilt, and Yard Machines. This part is sourced direct from its original manufacturer and ships individually.

This carburetor is a genuine OEM part. It is compatible with MTD brands, with models including 270-SUA, 370-SUC, and 170-SU. It can be used on appliances with small engines such as lawn mowers, snowblowers, and wood-chippers. The function of a carburetor is to combine the air and the fuel before the two are filtered into the engine through its connecting valves.If an engine or an appliance altogether is malfunctioning, it could be a sign that the carburetor needs to be replaced. First, check to see if the tank of fuel is in fact full. Then, in order to isolate and test the efficacy of the carburetor, tip a spoonful of fuel directly into the carburetor and try to start the engine with the starter rewind. If the engine sputters but eventually stops, it is likely that the carburetor is damaged or needs repair. This can be solved by ordering an OEM replacement carburetor part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment.When searching for a replacement carburetor, it is important to corroborate and confirm that the appliance and engine are of the MTD brand.