Remington Tank & Container

This is a fuel tank for MTD string trimmers. It’s constructed from white resin, which combines the tank and mounting flanges in a one-piece, molded design. The gas cap is glossy black plastic, and the tank and primer leads are both already installed. There are two mounting screws included in the kit, making installation more convenient. This is a 2-cycle fuel tank designed for engines that run on a mixture of oil and gas. Ordinary gasoline can cause damage to the fuel lines. Tanks should ideally last for several years but can get damaged, causing a leak. Gas tank leakage is a significant safety issue and must be fixed immediately. Tanks may also need to be replaced if they become extremely soiled. To replace the tank, you will simply need to disconnect the old tank’s fuel lines and remove the two mounting screws. In addition to MTD trimmers, this tank is also used on some Troy-Bilt and Cub Cadet models. This is an OEM part sourced directly from the manufacturer, and it is sold individually.

This fuel tank assembly stores fuel. It is made from a thick plastic material. The assembly includes the fuel tank, fuel cap, and fuel lines. Although it is generally durable, exposure to fuel chemicals and the environment can eventually cause fuel tank leaks. When this happens, the fuel leak may damage other components. To install a new tank assembly, make sure to drain the old tank first. Detach the fuel lines and then use a screwdriver to remove its mounting screws. This replacement will take less than 10 minutes to complete. MTD makes this brand-new fuel tank assembly. This replacement includes the tank itself, the fuel lines, fuel cap, and mounting screws. All of which are sourced directly from MTD. It is compatible with string trimmer models from Bolens, Yard-Man, Murray, Craftsman, Yard Machines, MTD, Cub Cadet, and Troy-Bilt. This fuel tank assembly doesn't include the original MTD air filter.

This is a genuine replacement fuel tank for a tiller. The fuel tank holds fuel for the tiller and connects fuel tubes to distribute fuel to the engine. Tiller fuel tanks may start to leak if it is cracked, punctured, or otherwise damaged. In addition to losing fuel, this is a serious safety hazard. If damaged, this part should be replaced before using the tiller. Do not attempt to repair a damaged fuel tank.Fuel tank replacement is a simple process. This project will require different tools depending on the model of tiller. Remove the fuel lines and fuel tank completely from the tiller. Remove the tiller fuel tank by unscrewing any bolts connecting the fuel tank to the engine. Set up the new fuel tank with the filter, fuel level indicator, and fuel cap. Reinstall the fuel lines from the engine to the fuel tank, and reattach the new fuel tank with the previous or new bolts.This is a genuine OEM replacement part. This part is compatible with Craftsman, Troy-Bilt, and MTD brands. This part is sold separately.

This fuel tank is a genuine OEM part sourced from the manufacturer. It is commonly used on chippers, lawnmowers, lawn tractors, and other lawn and garden equipment that is powered by gasoline. The fuel tank is attached to the carburetor with a hose and clamp. The fuel tank has a vented fuel cap to help keep a vacuum from developing in the fuel line. If a vacuum develops, the fuel will not flow from the fuel tank to the carburetor. The fuel tank is made of non-corrosive plastic to prevent deterioration from the fuel.Inspect the fuel tank periodically for signs of deterioration. If there are any cracks or flaws that could become cracks, replace the fuel tank. Leaking fuel not only reduces the performance of the engine but can also be a safety hazard. Before replacing the tank, the fuel should be run dry or pumped out. Remove the spark plug to prevent accidental engine ignition while the fuel tank is replaced. This fuel tank is sold as an individual unit. It is designed for use with lawnmowers, lawn tractors, and many other small engines that are powered by fuel. This fuel tank is compatible with equipment made by MTD, Yard Machines, Yard-Man, Cub Cadet, Troy-Bilt, and Husky.

This genuine replacement part is a fuel tank, also known as a fuel tank assembly. This part is the gas tank for a snow blower. This fuel tank holds gas, and is required for proper operation of a snow blower. A faulty or damaged fuel tank can leak gas, leading to improper or dangerous operation of the product. Shut off the snowblower, allow the engine to cool, and ensure the tank is empty before installation. Wear work gloves to protect the hands and work in a well-ventilated area during installation.This high quality OEM replacement part is sourced directly from the manufacturer, and is sold individually. This part is compatible with a variety of MTD, Yard Machines, Troy-Bilt, Yard Man, Cub Cadet, Husky snow blowers. Please note: original part number 751-11201 is now obsolete, and manufacturer has replaced the original part number with this part.

The momentary switch is a part that is unique to self-propelled lawn mowers and used to control the power of the self-propelled movement. The momentary switch provides power when pressed and held, and will ensure that the unit operates properly while in use. Over time, the momentary switch can become worn, short out, or just stop working as it should. This will require a replacement with a compatible part or the self-propelled part of the machine will not work properly. This genuine OEM part is compatible with self-propelled mowers from Cub Cadet, Bolens, MTD, Murray, and Troy-Bilt. It is made of durable materials and sold individually. Replacing this switch requires a wrench and screwdriver, as well as a socket set. Without a self-propelled switch, the mower will still operate but it will require the user to push the machine with their entire body weight. This can make the process of mowing much more difficult and often cause further unnecessary wear to the machine, which is why a replacement is essential.

Here is a replacement fuel tank for use with a range of different models of small engines. The fuel tank plays one of the most important roles in a machine with an internal combustion engine. The tank holds the gas, which flows through the fuel line, so the machine can operate. Although fuel tanks are durable and built to last, there could be any number of reasons that one may need to be replaced. On older machines, for example, the fuel tank could have become damaged or corroded. Even newer machines could have a faulty fuel tank that would need to have a replacement. If there is an issue with the tank, it is not a replacement that can wait. The tank could be leaking fuel, for example, which can be wasteful as well as dangerous. This genuine OEM replacement fuel tank is identical to the one that came with the machine. It is sold individually and does not include any of the hardware needed for replacement. It can work with dozens of models of tillers, log splitters, and other small engines. Compatible brands include Troy-Bilt, Cub Cadet, MTD, HUSKEE, MasterCut, and Yard Machines.

This fuel tank assembly can be used as a replacement part for the small engine of a snowblower or a tiller. The fuel tank assembly contains the fuel tank as well as the parts required to install the part. The purpose of the fuel tank is to store fuel for the engine and dispense the fuel in order to power the engine.A fuel tank assembly might be ordered as a complete replacement part if the fuel tank and its components suffer damage. This damage might manifest in the form of fuel leakages from punctures, holes, or corrosion to the material. If this damage affects the fuel tank and its components, it should be removed and replaced before using the appliance again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, MTD. It is sold individually. This fuel tank assembly is compatible with the following brands: MTD, Troy-Bilt, Yard Man, and Cub Cadet.

The fuel tank plays one of the most important roles in an engine. It is the reservoir that contains the fuel needed to operate the machine. If there is a problem with the tank, or if it is damaged in any way, it could result in a leak. This is a significant safety risk in addition to being a waste of fuel. Owners will not want to operate a machine that has a fuel tank problem, as it could result in a fire.Fuel tanks are meant to be robust, but they can become damaged. Accidents could cause a puncture in the tank. They could be damaged due to age and corrosion, as well. If there are any issues with the fuel tank, it should be replaced as soon as possible. A machine with a damaged or broken fuel tank should not be used.This fuel tank is used for many small engine models, such as those found in lawn and garden equipment. Compatible brands include MTD, Yard Machines, Craftsman, Columbia, Cub Cadet, and Troy-Bilt. Each fuel tank is sold individually and is a genuine OEM replacement part from the manufacturer.

This is a carbon canister assembly that is used to make lawn and garden equipment more ecologically friendly. When the engine is turned off, the fuel vapors from the fuel tank and carburetor are asborbed by the charcoal in the carbon canister assembly. It's part of an evaporative emission control system that captures hydrocarbon emissions.If there is a bad odor coming from the fuel, high emission levels, or pinging sounds, this could be an indication that the carbon canister assembly is failing. It can also cause weak performance from the equipment. If the carbon canister assembly isn't working properly, it will need to be replaced. Only basic tools are needed to remove the old carbon canister. The replacement component can be snapped in its place to ensure the equipment is capturing harmful emissions.This carbon canister assembly is a genuine OEM replacement part sourced directly from the manufacturer. It is sold as an individual component. This part is designed for compatibility with lawnmowers, trimmers, wood chippers, log splitters, string trimmers, and tillers made by MTD, Cub Cadet, and Craftsman.