Remington Log Splitter Parts

Seals the engine crankcase to prevent dirt and debris entry while keeping oil contained. Replace if worn, cracked, or leaking. Confirm fit with your model.

Seals the connection between engine exhaust and muffler system. Replace if you notice exhaust leaks, loud operation, or visible damage. Verify fit with your model number.

Seals combustion chamber between cylinder head and engine block. Replace if oil leaks, overheating, or poor compression occur. Verify fit with model number.

Replace your engine dipstick assembly if cracked, broken, or missing. Installs in the oil fill tube to check engine oil levels on lawn mowers.

This is an M5 x 8 bolt used in lawn equipment and other devices. It is typically used as a fastener on the top of the machine. Over time, the bolt may loosen and fall out. If the bolt is missing, it must be replaced for the equipment to continue to operate safely and efficiently.Before beginning a replacement, allow the engine to cool completely to prevent burns and other injuries. Wear protective gloves. If there is a damaged bolt, remove it before installing the new replacement part. Install the new bolt with a wrench or the appropriate sized socket. Secure tightly to ensure it stays fit.The M5 x 8 bolt is a genuine OEM replacement part. It is sold individually. The bolt is supplied by the manufacturer and made of high-quality, durable materials. It is compatible with machines from Troy-Bilt, Yard Machines, Cub Cadet, and MTD brand equipment. The bolt is usable in a variety of engines, including those found in tillers, blowers, chippers, log splitters, and other various lawn equipment types.

This is an M8 x 55 bolt typically used in small engines and lawn equipment. Due to regular wear and tear, bolts in lawn equipment may become lost or damaged over time. If the equipment is performing poorly, or vibrating excessively, a bolt may be the issue and replacement will be required.Be sure to wear gloves when replacing an M8 x 55 bolt. Allow the motor in your equipment to cool completely before disassembly. Once cooled, a damaged or missing bolt can be replaced using an appropriately sized wrench or socket set.The M8 x 55 bolt is an authentic OEM replacement part sourced directly from the manufacturer. It is sold individually. It is made of durable, high-quality material. The M8 x 55 bolt is used in various machines, including tillers, log splitters, chippers, and other small engines. The bolt is compatible with equipment made by Troy-Bilt, Yard Machines, Cub Cadet, and MTD.

This fuel tank nut attaches the fuel tank to the rest of the equipment. The fuel tank nut keeps the container from moving around while the device is in motion. The fuel tank nut may wear out or become loose over time, which will cause the fuel tank, itself, to become loose. To continue safe operation, lawn equipment with a worn or broken fuel tank nut should have the part replaced.Empty the fuel from the fuel tank before starting a fuel tank nut replacement project. After locating the fuel tank nut, use the proper tools to loosen and remove the damaged or worn-out fuel tank nut. Attach the new nut to the machine and secure it tightly. Replace the fuel tank.This is a genuine OEM part supplied by the manufacturer. The fuel tank nut is made of high-quality, durable material. The fuel tank nut is compatible with a variety of models of small engines, lawnmowers, log splitters, and trimmers. It is used in several different brands, including MTD, Yard Machines, Cub Cadet, Yard-Man, Husky, and Troy-Bilt. The part is sold as an individual piece.

Spider bushing bearing for log splitters. Replace when you notice excessive play, wobbling, or unusual noise during operation. Verify fit with your model.

Hydraulic inlet filter for log splitters. Filters contaminants from hydraulic fluid to protect pump and valves. Replace when clogged or annually. Confirm fit with your model number.

Replace a cracked, bent, or missing bracket and flange on your log splitter. This structural component provides secure mounting and support for safe operation.

This is a genuine OEM valve cover kit which contains the valve cover and inner gasket. The valve cover covers the engine's valves on chippers, tillers, log splitters, and other outdoor lawn and garden equipment. The cover protects the valves from exposure to weather and prevents oil from seeping out and causing damage. The gasket inside the valve cover ensures the lid is sealed tightly against the engine.Valve covers and the gasket require periodic inspection and regular maintenance. An inspection will indicate if removal and replacement are needed. Maintenance assures the gasket is replaced periodically to keep the seal tight. Heat, rain, snow, and normal wear and tear can lead to cracks in the cover and the gasket. Leaking oil, smelling burned oil, engine misfires, and reduced engine performance are good signs that the gasket and cover need to be removed and replaced. A screwdriver is required to remove and replace the cover. Always perform repairs in a well-ventilated area.This OEM valve cover kit is sourced from the manufacturer. It is sold as a single unit. Screws are not included with the valve cover kit. This valve cover kit is designed for various model MTD, Cub Cadet, Yard Machines, and Troy-Bilt engines.

Oil drain plug with washer for lawn mowers and outdoor power equipment. Replaces cracked, stripped, or missing drain plugs to prevent leaks.