Room Air Conditioner Parts

This replacement remote control restores convenient handheld operation of your appliance, letting you change settings and control basic functions from a short distance without opening the unit. Easy swap for a failed or missing remote. What it does:

• Sends control commands to the appliance so you can change modes, power, and settings remotely
• Restores normal remote response when the original remote is lost, damaged, or unresponsive
• Helps diagnose whether issues are remote-related versus appliance-related by verifying signal/send function
• Works only with compatible appliance models that use this OEM remote protocol

• Insert fresh batteries and test remote operation before installation
• Follow the appliance manufacturer's pairing or setup procedure if required
• If remote still does not operate the appliance, check battery orientation and replace batteries, then refer to the appliance's user manual
• Dispose of used batteries properly and avoid exposing the remote to moisture or extreme heat

The Grill Assembly is an OEM part for select Frigidaire window air conditioners. It forms the front protective cover and houses key components around the condenser unit. 

Symptoms of a bad grille assembly include:

• Blocked or restricted airflow through the front vent 
• Loose or detached front panel sections
• Rattling noises emanating from the grille area
• Damage, dents, or missing pieces 

Causes can be deformities from impact, cracks from weathering or aging plastic, or loose fasteners that no longer hold the grille securely in place.

Proper airflow is crucial to a window AC unit’s performance and efficiency. A faulty grille inhibits cooler distribution while exposing internal parts to potential foreign object intrusion. 

This OEM replacement is also compatible with Electrolux, Amana, White-Westinghouse, and Kenmore models. Replace today to restore your air conditioner’s protective barrier and optimized ventilation.
 

This safety device protects the compressor by interrupting power if it overheats or draws excessive current. Replacing a weak or failed protector restores reliable starts and helps prevent nuisance shutdowns and compressor damage.

• Opens the compressor circuit during overheat/overload to prevent motor damage
• Common symptoms include: compressor won't start, clicks and briefly hums, or starts then quickly shuts off
• Can contribute to poor cooling while fans or controls still operate
• Visual clues may include heat discoloration or damaged terminals at the protector

• Disconnect power before servicing; capacitors in the system can retain a charge—discharge safely
• Access the compressor terminal cover; note wire locations and remove the old protector
• Inspect terminals/connectors; replace any burnt or loose spade connectors for a secure fit
• Fully seat the new protector on the compressor terminal and reconnect wires firmly; check any companion start relay or capacitor if symptoms persist

This bearing assembly supports the dryer drum and helps the drum rotate smoothly for quiet, even drying. Replacing a worn bearing restores stable drum movement and reduces noise and vibration. What it does:

• Provides a low-friction support surface for the dryer drum, helping it spin properly
• Prevents drum wobble and off-center rotation that can wear belts and rollers
• Reduces squealing, grinding, or rumbling noises caused by a failing bearing
• Helps maintain even drying by keeping the drum aligned

• Disconnect power and fuel (gas) supply before starting any repair
• Access typically requires removing the dryer front or rear panel and drum; refer to a model-specific repair guide
• Use proper tools and support the drum during removal to avoid damage
• Inspect adjacent parts (shaft, seal, rollers) for wear and replace if visibly damaged

This electronic control board is the oven/range main control that manages bake/heat functions and user interface signals so the appliance can run selected cycles. Replaces a failed or malfunctioning main control assembly to restore command and timing functions. What it does:

• Regulates oven temperature control signals and cycle timing
• Communicates with the user interface and touchpad/display
• Stops erratic cycling or control lockups caused by a failed board
• Resolves symptoms like unresponsive controls, incorrect cycles, or no heating when diagnostics point to the main board

• Disconnect power at the breaker or unplug the appliance before servicing
• Handle the board by the edges and avoid static discharge; wear an ESD strap if available
• Verify connectors and harness routing before removal; label wiring to ensure correct reconnection

This display board is the front electronic control that shows oven/range status and lets you select functions, times, and temperatures. Replacing a failed display restores visible readouts and responsive control inputs for safe, reliable operation. What it does:

• Provides the visual display and status indicators for the appliance control console
• Accepts user inputs from the control panel and relays commands to the main control
• Commonly replaced for blank or flickering displays, unreadable characters, or unresponsive console controls
• Can clear display-related error symptoms when the underlying issue is a failed display module

• Disconnect power at the breaker or unplug the appliance before starting work
• Access typically requires removing the control console or back console panel; follow OEM service instructions
• Handle the board carefully and avoid static discharge; do not touch connector pins
• If symptoms persist after replacement, check the main control and wiring harness for faults

This is the main control board that manages the appliance's electronic functions and user interface, restoring normal control of cycles, displays, and timed operations. Replaces a failed or unresponsive control module to recover device control. What it does:

• Receives input from buttons/knobs and sends commands to motors, valves, heaters, and displays
• Controls timing, cycle selection, and system diagnostics for normal operation
• Resolves issues like unresponsive controls, no display, or incorrect cycle behavior
• Requires correct configuration and secure connections to function reliably

• 1 main control board (electronic control assembly)

• Disconnect power before service to avoid shock or damage
• Handle board by edges and avoid contact with components or circuitry
• Verify mounting, connectors, and wire routing match original before restoring power

This is a replacement power cord that restores safe electrical connection to the appliance. Use it when the original cord is damaged or no longer supplying reliable power to help restore normal operation. What it does:

• Provides the main electrical connection between the appliance and household power
• Replaces frayed, cut, or melted cords that cause intermittent power or no power
• Removes loose or damaged plug connections that can trip breakers or cause arcing
• Helps eliminate visible burn or scorch marks at the cord or plug

• Always disconnect power at the breaker or unplug the appliance before servicing.
• Verify the cord routes through the strain-relief and is secured per the appliance's wiring harness.
• Inspect terminal connections for corrosion and tighten securely; match wire colors to original wiring.

This louver is a molded air vent piece that restores proper airflow routing and a finished appearance to the appliance. It replaces a cracked, broken, or missing vent louver to help protect internal components and maintain cabinetry aesthetics. What it does:

• Directs and channels internal airflow for even circulation
• Covers a cabinet or grille opening to protect internal parts from debris
• Replaces cracked, warped, or missing louvers that can rattle or look damaged
• Helps restore proper fit and finish on the appliance exterior

• One replacement louver

• Disconnect power to the appliance before beginning any work
• Inspect mounting tabs and clips; replace only if the OEM clips are present or available
• Usually secures with snap-in tabs or a few screws—use appropriate hand tools and avoid over-tightening

This thermistor is the refrigerator temperature sensor that helps the control board monitor and regulate cooling. Replacing a faulty sensor restores accurate temperature readings and consistent cooling performance. What it does:

• Measures internal refrigerator/freezer temperature and sends readings to the control board
• Helps the control board adjust compressor and fan operation for stable temperatures
• Can cause incorrect temperature display or uneven cooling when it fails
• Linked to excessive running, frequent defrost cycles, or poor cooling performance

• Disconnect power to the appliance before servicing to avoid shock or damage
• Handle the sensor and wiring harness carefully; avoid kinking or damaging the lead
• Ensure the connector is fully seated and any mounting clip or bracket is secured
• Some panel removal may be required; follow for access and reassembly

This transformer supplies the low-voltage power needed by the appliance's control and ignition systems, restoring proper operation of electronic controls and spark ignition when the original transformer fails. What it does:

• Converts incoming mains power into the low-voltage output used by control boards and igniters
• Supports reliable spark generation for gas ignition systems on compatible appliances
• Helps restore responsive electronic controls and displays when a failed transformer causes loss of power
• Prevents intermittent control or ignition failures caused by a defective transformer

• One transformer

• Disconnect power to the appliance before starting any repair to avoid shock or injury
• Handle wiring harnesses and connectors carefully; ensure secure connections and proper routing