Room Air Conditioner Parts

This axial flow fan circulates air inside the appliance to help cool components and maintain proper ventilation. It replaces a worn or damaged blower wheel to restore airflow and reduce overheating risk. What it does:

• Moves air across coils or internal components to support cooling and ventilation.
• Helps prevent overheating and supports consistent appliance performance.
• Can reduce unusual temperature-related symptoms or poor cooling/airflow.
• Fits into the appliance's blower/motor assembly to restore proper airflow.

• Disconnect power to the appliance before starting any repair.
• Handle the fan blades carefully to avoid bending or damage.
• Verify proper seating on the motor shaft and secure fasteners per the appliance's service instructions.

This control panel is the front console piece that holds the selector buttons and display, restoring the appliance's user interface and appearance. It replaces a cracked, faded, or damaged console surface so controls are accessible and protected. What it does:

• Provides the finished front surface for the appliance controls and display
• Secures and aligns buttons, touchpads, and the display assembly
• Restores proper button access and visible labeling for normal operation
• Helps prevent moisture and debris from reaching internal electronics

• Intended as a direct replacement; fit using your model and part number before installation
• Remove power to the appliance before beginning work to avoid electrical shock
• Handle the panel carefully to avoid scratching the finish or damaging attached components
• If the panel attaches to electronics or a display, connectors are seated and wires routed per factory orientation

This support to cabinet is a metal mounting bracket that secures the appliance to surrounding cabinetry for stable, rattle-free operation. It helps keep the unit aligned and prevents shifting or sagging during normal use. What it does:

• Anchors the appliance to the cabinet frame to maintain proper alignment and fit
• Reduces vibration and rattling caused by loose or worn fasteners
• Prevents the appliance from tilting or shifting when doors or controls are used
• Restores safe, stable mounting after damage or corrosion to the original bracket

• Disconnect power (and gas if applicable) and remove surrounding trim before starting
• Retain or replace mounting hardware as needed; use screws appropriate for cabinet material
• Position bracket squarely against cabinet and appliance mounting points, then tighten securely

This curtain assembly replaces a damaged or missing door trim curtain to restore proper fit and protect internal components while improving appearance. It's a direct-replacement component used on compatible GE appliances. What it does:

• Covers and protects internal door/frame openings to keep components shielded from debris and light
• Helps maintain correct door alignment and trim fit for smooth opening and closing
• Reduces rattling or vibrating noises caused by a loose or broken curtain piece
• Restores finished appearance when the original curtain is cracked, warped, or missing

• One curtain assembly

• Disconnect power to the appliance before starting any repair
• Installation typically requires removal of the outer door or trim panel and basic hand tools
• Handle parts carefully to avoid scratching trim or damaging clips; keep fasteners organized for reassembly

This louver is the molded air outlet grille that directs airflow inside the appliance and helps cover the evaporator/vent area for a finished appearance. Replacing a damaged louver restores proper airflow direction and appearance. What it does:

• Directs cooled air from the evaporator into the fresh-food compartment.
• Covers and protects the vent/evaporator opening from debris.
• Helps maintain even airflow; cracked or broken louvers can cause drafts or uneven cooling.
• Restores the interior appearance when the original grille is warped, cracked, or broken.

• Disconnect power to the appliance before servicing to avoid electrical hazard.
• Access may require removing interior shelves, drawers, or a trim panel.
• Remove clips or retaining screws carefully; do not force the plastic to avoid breakage.
• If clips are damaged during removal, replace them to ensure a secure fit.

This top guide secures and helps align the dishwasher's upper rack for smooth sliding and reliable operation. It prevents the rack from binding or coming off the track, restoring normal loading and unloading performance. What it does:

• Guides and stabilizes the upper rack as it moves in and out
• Keeps the rack properly aligned to prevent tipping or jamming
• Reduces wear on the rack rollers and track by maintaining correct alignment
• Helps ensure dishes load and unload smoothly without shifting

• One top guide

• Designed for straightforward replacement; remove the upper rack to access the guide
• Inspect the track and rollers for damage and clean before installing
• Use basic hand tools; avoid forcing plastic tabs to prevent breakage
• Disconnect power and follow appliance safety guidelines before servicing

This control sheet is a thin insulating/ protective console panel that helps shield the appliance control assembly from heat, moisture, and debris for reliable keypad and electronics performance. It restores proper protection behind the control area. What it does:

• Provides a protective barrier behind the console to help prevent heat and moisture damage to control electronics
• Helps keep dust and debris away from the control board and keypad assembly
• Maintains the original spacing/insulation between the control and inner cabinet components
• Helps reduce the chance of shorts or corrosion caused by stray moisture

• One control sheet/console insulation panel

• Recommended for repair by someone comfortable working with appliance control panels
• Disconnect power (unplug or shut off breaker) before removing the console or accessing the control area
• Handle the control sheet gently to avoid tearing; reassemble fasteners in their original positions

This thermistor is a refrigerator temperature sensor that helps the control board monitor and regulate cooling for consistent food temperatures. It replaces a failed sensor to restore accurate temperature readings and stable cooling cycles. What it does:

• Senses internal temperature and sends a signal to the control board for proper compressor and damper control
• Helps the refrigerator maintain set temperatures and prevents overcooling or warming
• Can cause temperature fluctuations, long run times, or incorrect defrost cycles when failing
• Works with the control system to enable accurate temperature-based operations

• One thermistor temperature sensor

• Disconnect power to the appliance before beginning any repair
• Handle sensor and wiring gently; avoid pulling on wires or bending the probe sharply
• Install in the same location and orientation as the original sensor for correct readings