Room Air Conditioner Parts

The Power Cord is an OEM replacement part for Frigidaire window air conditioners. Extending from the rear of the AC unit, the durable cord safely transmits electricity from the wall outlet to internal components like the compressor and fan motor. Constructed with insulation, strain relief connectors, and protective cable jacketing, the cord undergoes constant flexing during seasonal use and storage.

Symptoms of a bad power cord include:

• The air conditioner failing to turn on or function 
• Frayed, cracked, or exposed inner wiring
• Tripping the circuit breaker upon startup
• An electrical burning smell coming from the cord area

Causes can involve repeated bending over time weakening internal wires, cracks in the outer jacket allowing moisture intrusion, or animal/insect damage interfering with current flow. 

Replacing this Frigidaire OEM cord prevents hazards while restoring dependable cooling performance. Compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Fan Blade is an OEM replacement part for Frigidaire window air conditioners. Located inside the unit behind the protective grill, the fan blade rotates to circulate cooled air throughout the room. Made with corrosion-resistant materials, the precisely balanced blade withstands constant rotation during seasonal operation.  

Symptoms of a bad fan blade include:

• Excessive vibrations or strange noises from the AC unit  
• Reduced air circulation felt in the room
• The blade visibly rubbing or hitting the fan enclosure

Causes can be dirt buildup causing imbalance, broken blade tips from impacts, or loosened set screws allowing shaft wobbling over extended use. 

Replacing this OEM Frigidaire part restores smooth, powerful air distribution. Compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This sensor support is a small mounting bracket that secures an appliance sensor in the correct position for reliable readings and consistent operation. It replaces a worn or broken bracket to restore proper sensor placement. What it does:

• Holds the sensor firmly in place to help maintain accurate measurements
• Prevents sensor movement or vibration that can cause inconsistent readings
• Helps reduce false error codes related to misaligned sensors
• Restores proper sensor positioning after accidental damage or wear

• One sensor support mounting bracket

• Disconnect power to the appliance before beginning any repair
• Handle the sensor and wiring gently; avoid pulling on wires or connectors
• Ensure the sensor is seated in the bracket in the correct orientation before reassembly
• Use the existing fasteners or clips; do not overtighten plastic parts

This electronic control unit replaces the oven/range control board to restore normal control and display functions. It provides the interface that manages cook cycles, timing, and user inputs for safe, reliable operation. What it does:

• Manages oven/range control logic, timers and display functions
• Responds to touchpad/knob commands and signals heating elements or igniters
• Helps stop erratic cycling, unresponsive controls or incorrect cook times
• Resolves blank or incorrect display, or loss of control panel responsiveness

• Disconnect power at the breaker or unplug the appliance before starting
• Handle the board carefully; avoid touching circuitry and use anti-static precautions
• Use basic hand tools to access the control panel; keep fasteners for reassembly

This fuse protects your appliance's electrical circuit from overcurrent. When the fuse opens, power to the controls or components is interrupted. Replace a blown fuse to restore protection and help prevent additional circuit damage.

• Opens the circuit during a short or surge to protect wiring and electronics
• Signs of a blown fuse: appliance dead/no power, display or controls unresponsive, interior lights out
• Typically fails due to shorted components, pinched wiring, or a power spike
• Tests open (no continuity) with a meter when failed

• Disconnect power at the breaker or unplug before servicing; some models contain capacitors that can retain a charge.
• Access the fuse, verify it is open with a continuity test, and note its placement.
• Replace only with the exact fuse type and rating specified for your model; never bypass or upsize a fuse.
• If a replacement fuse blows again, locate and correct the underlying short before restoring power.

This electrical fuse protects your appliance's circuitry by opening the circuit when a fault or overload occurs. Replacing a blown fuse restores safe power flow and helps prevent further electrical damage. What it does:

• Protects the appliance's electrical circuit by interrupting power if an overcurrent condition occurs
• Stops power to control boards or motors when the original fuse has blown
• Common symptom: appliance has no power or will not start despite power at the outlet
• Common symptom: intermittent power or repeated fuse failure indicating an underlying fault

• One replacement fuse

• Disconnect power (unplug appliance or switch off circuit breaker) before servicing
• Verify the fuse is the correct OEM part number and is visibly blown before replacing
• Avoid touching live terminals; use insulated tools if needed
• If the new fuse blows again, stop and diagnose the underlying issue