Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Roper Wall Oven Parts

Best Seller
Roper Oven Door Seal (Horizontal, Top/Bottom)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP7212P006-60

This horizontal oven door seal lines the top and bottom edges of the door opening to keep heat contained inside the cavity. Replacing a worn seal restores stable temperatures, more efficient preheating, and consistent baking results.

  • Seals the oven opening along the top and bottom edges to reduce heat loss
  • Helps maintain set temperature and overall cooking performance
  • Replaces cracked, frayed, flattened, or brittle horizontal gasket
  • Common signs include visible gaps, heat escaping around the door, longer preheat times, and temperature fluctuations
What's included: One horizontal door seal. Install notes:
  • Disconnect power and allow the oven to cool completely before servicing
  • Open the door and carefully pull the old seal straight out of the retainer
  • Note clip/retainer positions as you remove the old seal and reuse them as designed
  • Press the new seal evenly into place without stretching; ensure corners are fully seated for a uniform seal

Do-It-Yourself Stories from Customers like You Oven would not heat up past 100 degrees and the light switch was broken   Gary B. • Redondo Beach , CA • August 28, 2015

A new ignitor was installed, and a new light switch was installed Read more

More
$56.95
Compare At:
$67.77
You Save:
$10.82

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Roper Burner Cap
Genuine Whirlpool part
By: Whirlpool
Part Number: WP98017461

Color: Black. Measures about 3 inches in diameter. For grey use WP98017461.

Do-It-Yourself Stories from Customers like You Missing parts that you had to supply   James B. • Gordon , GA • November 28, 2015

Ordered the parts from you and it's good now thanks for thinking of future use. Read more

More
$46.95
Compare At:
$55.87
You Save:
$8.92

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Roper Oven Bake Element
Genuine Whirlpool part
By: Whirlpool
Part Number: WPY04000041

This bake element supplies the primary heat from the bottom of the oven during the Bake cycle. Replace it to restore proper preheating and even results when the original is burned out, damaged, or no longer heating. What it does:

  • Provides radiant heat for baking and preheating from the lower oven position
  • Helps the oven reach and maintain the set temperature for consistent cooking
  • Common symptoms: no heat in Bake, very slow preheating, uneven baking, or a visible blister/crack in the element
  • Restores normal oven operation when the existing element has failed
What's included:
  • 1 bake element
Install notes:
  • Disconnect power at the breaker or unplug the appliance before servicing
  • Remove oven racks; take out the element's mounting screws and gently pull the element forward
  • Support and disconnect the two wire terminals; prevent wires from slipping back into the insulation
  • Attach wires to the new element, secure with existing hardware, restore power, and test

This part fixes the following symptoms
  • Little to no heat when baking
See more...
Do-It-Yourself Stories from Customers like You Baking element went out   Vincent B. • Yukon , OK • February 28, 2016

It took 10 minutes and a screwdriver, remember to turn off power to the oven at the fuse box. By the way, I ordered the part at 1:30pm and received it at 12:30pm the next day using normal shipping, not bad. Read more

More
$72.53
Compare At:
$86.31
You Save:
$13.78

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Roper Oven Door Hinge
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9782033

This oven door hinge will work for either the left or right side of an oven door. The hinges on the door are responsible for ensuring that the door can open and close properly. If one or both of the hinges are not working correctly, the door may become difficult to open and close or may not stay on the oven. If this happens, the hinges should be replaced before using the oven.Made of durable metal, the oven door hinges should last a long time. However, they can become damaged and may need to be replaced. If there is too much pressure placed on the door or hinges, it could cause them to break. Owners may want to replace both of the hinges at the same time. Be sure that the oven is off and cooled before replacing this part.The oven door hinges are for use with certain ovens from KitchenAid, Whirlpool, Inglis, and Kenmore. The hinges are genuine OEM replacement parts sourced from the manufacturer. Each hinge is sold individually. Owners that need to replace both hinges should buy two.

This part fixes the following symptoms
  • Door won't close
See more...
Do-It-Yourself Stories from Customers like You Door hinges were sprung.   William L. • Fargo , ND • November 27, 2017

Replaced the hinges after watching YouTube video. Read more

More
$133.95
Compare At:
$161.69
You Save:
$27.74

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Roper Surface Element Coil (6-Inch, 1250W)
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10345407

Restore steady cooking performance with this surface element coil. The 6-inch, 1250-watt burner replaces a worn or open coil so your range heats properly for everyday simmering, sautéing, and boiling.

  • Generates heat on a 6-inch cooking zone for boiling, sautéing, and simmering
  • Fixes a burner that won't heat or only heats intermittently
  • Addresses uneven heating or unusually slow warm-up
  • Helps when the coil shows visible breaks, blistering, or burned spots
What's included: One 6-inch, 1250-watt surface element coil. Install notes:
  • Disconnect power at the breaker and let the cooktop cool completely
  • Remove the old coil and inspect the receptacle/terminal block; replace if burnt or loose
  • Align prongs and press the new coil fully into the receptacle; ensure the support bracket seats in the drip pan notch
  • After installation, test the burner with a pan to ensure even heating

Do-It-Yourself Stories from Customers like You Old burned element receptacles   Leo F. • Eagle Lake , TX • July 16, 2016

Bought replacement burner receptacles. Cut off the old ones, used wire nuts to connect replacements. Read more

More
$78.72
Compare At:
$93.68
You Save:
$14.96

IN STOCK
Ships Monday Guaranteed
Add to Cart
Roper Oven Door Handle (Black)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP98005317

This black oven door handle restores a secure grip and clean look to your appliance. Replace a cracked, loose, or missing handle to safely open and close the oven door.

  • Provides the handhold used to open and close the oven door
  • Replaces damaged or missing handle to restore normal operation
  • Helps address a loose, wobbly, or sagging handle
  • Refreshes the door's appearance when the old handle is scuffed or broken
What's included: One black oven door handle.
  • Disconnect power at the breaker; for gas units, shut off gas. Allow the oven to cool completely.
  • Remove the door or inner panel per your model's manual to access the handle mounting screws.
  • Support the outer glass/trim while removing and installing hardware to prevent damage.
  • Tighten mounting screws evenly and verify smooth door operation before use.

Do-It-Yourself Stories from Customers like You The tabs that go into the glass door became corroded over time and broke causing the handle and glass pane to come off   Thomas J. • Livonia , MI • August 03, 2014

I removed the screws inside the oven door and the retainer rings holding the handle onto the glass. I then replaced the handle put on new retainer rings and used the new screws provided and re-attached the handle and glass to the door. Total fix time 10 minutes. I was impressed by the quick delivery of my new handle and the fact that they sent new hardware as well. My oven was only down for three and a half days , only because it happened on the weekend. Read more

More
$99.58
Compare At:
$118.50
You Save:
$18.92

IN STOCK
Ships Monday Guaranteed
Add to Cart
Roper Radiant Surface Element (6-Inch)
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10259868

This 6-inch radiant surface element is the heating source for a small burner beneath a glass-ceramic cooktop. Replacing a failed element restores reliable, controllable heat to that cooking zone. What it does:

  • Heats the 6-inch cooking zone under the glass top when the control is turned on
  • Cycles to help maintain the selected temperature during cooking
  • Common symptoms of failure: small burner won't heat, heats unevenly or intermittently, or shows visible burn spots/damage
What's included:
  • 1 six-inch radiant surface element
Install notes:
  • Disconnect power at the breaker and allow the cooktop to cool completely
  • Lift the glass top or remove the cooktop to access the elements; support the glass to avoid stress or cracks
  • Note wire positions and transfer connections to the new element one at a time
  • Ensure the element sits flat in its mounting brackets before reassembly and testing
Size note: Designed for 6-inch burner locations on glass-ceramic electric cooktops/ranges.

This part fixes the following symptoms
  • Element will not heat
See more...
Do-It-Yourself Stories from Customers like You Needed new element (not received yet) and new drip bowls   Diane C. • Springhill , LA • August 17, 2015

Not really a repair, just needed to update some parts that were worn out. Drip pans were perfect and I am so glad to have found them on this location. Read more

More
$85.95
Compare At:
$102.28
You Save:
$16.33

IN STOCK
Ships Monday Guaranteed
Add to Cart
Roper Bake Element (Lower Oven)
Genuine Ge part
By: Ge
Part Number: WB44X238

Replacement bake element for the lower oven. This is the primary heat source in Bake mode, restoring reliable preheats and even results when the original element fails. If your oven won't heat or underbakes, this part addresses the issue.

  • Provides radiant heat from the bottom of the oven during Bake mode
  • Common failure symptoms: no heat in Bake, won't reach set temperature, or visible breaks/blistering on the element
  • Restores even baking and consistent preheat performance when replaced
  • Often tests open (no continuity) when the original element is burned out
What's included: 1 bake element Install notes:
  • Disconnect power at the breaker or unplug the appliance before servicing
  • Remove oven racks, then the element's mounting screws; gently pull the element forward to access wires
  • Support wires so they don't retract; disconnect the two spade terminals and transfer any mounting bracket from the old element if needed
  • Attach terminals to the new element, tuck wires carefully, reinstall screws, restore power, and test Bake

Do-It-Yourself Stories from Customers like You Bake element in electric oven needed replacing   David H. • Snellville , GA • April 04, 2016

Very simple to fix this problem and took only a few minutes. Appliance Parts Pros has the best delivery service. I ordered the part about 2pm and the part was delivered at 11am the next morning. I live in the Atlanta area so delivery is probably faster than other areas but they always ship the same day if the order is placed before 5pm. I have used App Parts Pros several times over the last 5 years and have always been very satisfied with the service and the parts. Read more

More
$74.34
Compare At:
$88.46
You Save:
$14.12

IN STOCK
Ships Monday Guaranteed
Add to Cart
Roper Hinge, Door
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8053807

This hinge is for painted door only. For stainless steel door use WP8272822.

This part fixes the following symptoms
  • Door won't close
See more...
Do-It-Yourself Stories from Customers like You The oven door would not close completely   William R. • Emporia , KS • July 27, 2016

This oven was a Kenmore model #66595822003. I replaced both spring hinges. This oven was a white oven so it took the MFG# WP8053807 hinge (order two of them). They are the same hinge. No left or right. To get the door off the oven, open the door all the way open, I installed pins (preferably only 1/4" long) in the holes of both hinges. Then remove the spring steel retainers above old hinges in the oven frame. These holds hinges in place. Now close the door until hinge stops on pins. Lift up... Read more

More
$75.63
Compare At:
$90.00
You Save:
$14.37

IN STOCK
Ships Monday Guaranteed
Add to Cart
Roper Screw
Genuine Ge part
By: Ge
Part Number: WB1M1

ST10-16 X 7/16"

Do-It-Yourself Stories from Customers like You Bottom heating element not working on a ge electric range   David K. • Portsmouth , RI • December 21, 2014

Move stove to unplug, remove rear center panel, indentify the two spade connectors that feed the heating element and remove (unplug) them. Remove two screws that hold the element to the inside rear wall of the stove and remove element. Install new element, plug in the previously removed spade connectors, re-install rear center panel, plug range (power) in, move stove back into place and enjoy. Read more

More
$7.65
Compare At:
$9.18
You Save:
$1.53

IN STOCK
Ships Monday Guaranteed
Add to Cart
Roper Burner Knob (Wht)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP98006102

Color: White. This knob measures about 2 inches in diameter. For black use WP98006100. For biscuit use WP98008208. Sold individually.

Do-It-Yourself Stories from Customers like You Missing refrigerator lower door handle and improper fitting knows on stove   Kevin R. • Cleveland , OH • February 03, 2019

You found the parts we need and we installed them. The sales person was excellent. Read more

More
$21.95
Compare At:
$26.12
You Save:
$4.17

IN STOCK
Ships Monday Guaranteed
Add to Cart
Roper Oven Igniter, Flat Style
Genuine Whirlpool part
By: Whirlpool
Part Number: 814269

Amperage range 3.2 to 3.6

This part fixes the following symptoms
  • Won't start
  • Gas igniter glows, but will not light
  • Little to no heat when baking
See more...
Do-It-Yourself Stories from Customers like You Gas oven wouldn't heat up   Derek S. • Phoenix , AZ • March 01, 2015

Replaced the oven igniter, following the general instructions on the ApplicancePartsPro.com website. It took me a little while to figure out how to get to the wiring for the igniter, as I had no access panel on the back to get to the wires. In my particular Whirlpool oven (very old model) it turned out that you have to remove the pots/pans drawer under the oven to get to the exposed wiring at the back. Once I figured this out, the rest of the replacement was a snap. Read more

More
$98.95
Compare At:
$116.76
You Save:
$17.81

IN STOCK
Ships Monday Guaranteed
Add to Cart
Roper Light Socket (Lamp Holder)
Genuine Whirlpool part
By: Whirlpool
Part Number: W10856866

This light socket holds the bulb and supplies power for reliable appliance lighting. Replace a cracked, heat-damaged, or loose socket to restore safe, consistent illumination inside the appliance.

  • Secures the lamp and connects it to the appliance wiring
  • Restores proper electrical contact to the bulb
  • Replaces sockets showing arcing, discoloration, melting, or a loose fit
  • Common symptoms: light won't turn on, flickers, works intermittently, or bulbs fail prematurely
What's included: 1 light socket Installation notes:
  • Disconnect power at the breaker or unplug the appliance before servicing
  • Allow the appliance to cool completely before accessing the socket
  • Use the bulb type and wattage specified for your model
  • Transfer existing mounting screws/brackets and wiring connectors as needed; ensure tight, clean connections

Do-It-Yourself Stories from Customers like You Light shorted out   Rex P. • Eastman , GA • September 12, 2020

Your part was a perfect replacement. Fixed in 30 minutes. Read more

More
$9.95
Compare At:
$11.74
You Save:
$1.79

IN STOCK
Ships Monday Guaranteed
Add to Cart
Roper Terminal Block
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8203546

This terminal block is the insulated connection point where the appliance's incoming power ties into the internal wiring. Replacing a heat-damaged or loose block restores a safe, reliable electrical path and helps prevent arcing and intermittent power loss.

  • Connects the supply conductors to the unit's internal wiring
  • Provides insulated posts to securely fasten and distribute power
  • Helps maintain tight, low-resistance connections
  • Common failure signs: melted/discolored plastic, burned or loose terminals, arcing, scorching, or intermittent/no power after confirming the cord and breaker
What's included: 1 terminal block Install notes:
  • Disconnect power at the breaker or unplug the appliance; verify no voltage before servicing
  • Photograph or label wire positions to ensure correct reassembly
  • Inspect and replace any heat-damaged wire ends or lugs; use appropriate terminals
  • Tighten connections securely and ensure wires are fully seated and strain-relieved as originally installed

Do-It-Yourself Stories from Customers like You Bad terminal block   Michael M. • Ronkonkoma , NY • June 29, 2015

Replaced it with the part I got from you. Read more

More
$22.95
Compare At:
$27.54
You Save:
$4.59

IN STOCK
Ships Monday Guaranteed
Add to Cart
Roper Top Burner Control Knob
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3196231

Range surface unit knob. Color: Black. Size: 2 inches in diameter. It measures about 2 inches in diameter. For white order WP3196232. For bisque order WP3196233.

Do-It-Yourself Stories from Customers like You Missing knob   Brian L. • Cincinnati , OH • July 11, 2014

Everything went great. Fast shipment and a simple snap on of the knob and it was done! Read more

More
$24.95
Compare At:
$29.69
You Save:
$4.74

IN STOCK
Ships Monday Guaranteed
Add to Cart
Roper Fan Assembly
Genuine Ge part
By: Ge
Part Number: WB26X114

This fan assembly restores proper airflow inside your appliance, moving air to cool internal components and support ventilation. Replace a seized, noisy, or non-running fan to prevent overheating and bring back efficient, quieter operation.

  • Circulates air through the appliance for cooling and/or ventilation
  • Helps maintain safe operating temperatures and consistent performance
  • Common symptoms: no or weak airflow, fan won't start or runs intermittently, loud grinding/squealing/rattling, excessive vibration
  • A failed fan can lead to overheating or thermal safety shutdowns
What's included: 1 fan assembly Install notes:
  • Disconnect power at the breaker before servicing
  • Access the fan per your model's service information; note wire locations and mounting orientation
  • Transfer any brackets, screws, or gaskets from the original
  • Ensure the fan wheel spins freely and nothing contacts it before restoring power

Do-It-Yourself Stories from Customers like You Oven fan made noise when started   Ronald H. • Homer Glen , IL • December 15, 2015

I removed oven panel and found the fan blades had warped and were hitting the base that fan was mounted to.I turned off the power via circuit breaker,removed fan mounting screws,removed two wires and installed new fan.Reset breaker,oven is nice and quiet now. Read more

More
$110.66
Compare At:
$131.69
You Save:
$21.03

IN STOCK
Ships Monday Guaranteed
Add to Cart

Related Parts

Roper Wall Oven Baffle Parts Roper Wall Oven Blower Wheel Or Fan Blade Parts Roper Wall Oven Bracket & Flange Parts Roper Wall Oven Broiler Pan Parts Roper Wall Oven Bumper, Bushing, Grommet Parts Roper Wall Oven Burner & Related Parts Roper Wall Oven Cable Or Retainer Parts Roper Wall Oven Chassis Or Cabinet Parts Roper Wall Oven Clip Or Clamp Roper Wall Oven Control Board Roper Wall Oven Damper & Related Parts Roper Wall Oven Door, Door Glass & Parts Roper Wall Oven Filter Parts Roper Wall Oven Fuse Or Sensor Roper Wall Oven Gas Conv Kit Parts Roper Wall Oven Gasket & Seal Roper Wall Oven Guard, Shield, Barrier Parts Roper Wall Oven Handle Roper Wall Oven Heating Element Roper Wall Oven Hinge Roper Wall Oven Housing Or Cover Parts Roper Wall Oven Igniter Roper Wall Oven Insulation, Sound Dampening Parts Roper Wall Oven Knob, Dial & Button Roper Wall Oven Latch, Catch, Lock Parts Roper Wall Oven Leg Or Foot Parts Roper Wall Oven Light, Bulb, Lamp Roper Wall Oven Motor Roper Wall Oven Oven Control Or Thermostat Parts Roper Wall Oven Paint Parts Roper Wall Oven Panel Parts Roper Wall Oven Pilot Parts Roper Wall Oven Rack Or Shelf Roper Wall Oven Screws, Nuts, Washers Roper Wall Oven Shaft Or Pin Parts Roper Wall Oven Spring Roper Wall Oven Support Parts Roper Wall Oven Switch Roper Wall Oven Terminal Block, Receptacle Parts Roper Wall Oven Transformer Parts Roper Wall Oven Trim Roper Wall Oven Tube Or Fitting Parts Roper Wall Oven Valve Parts Roper Wall Oven Wire, Harness, Power Cord Parts
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store