Dishwasher Cap Handle Parts
Genuine Ge part
By: Ge
Part Number: WD12X10163
Detergent door won't stay closed or latch broken? This dishwasher dispenser releases soap and rinse aid during cycles. DIY repair in 20-30 minutes.
This part fixes the following symptoms
-
Will not dispense detergent
See more...
Do-It-Yourself Stories from Customers like You
Detergent and rinse aid dispenser stopped working Donald L. • Rochester , MI • April 18, 2020
Bought the replacement dispenser from APPros.com (of course). The video shows a front control panel, and our dishwasher has the 'hidden' control panel on the top of the door. So here's the difference:
1) You need to take out all the screws, except the two near the latch at the top. The other video shows only taking out the bottom six screws because the remainder of the screws hold the front control panel. I used a couple paint cans with rags on top to hold the corners of the door when...
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: A00099902
Dishwasher won't start or door won't latch? This handle and latch assembly secures your door and activates switches. Simple 10-minute DIY repair.
Do-It-Yourself Stories from Customers like You
Blinking lights on control panel and wouldn't run Christine W. • Palm Coast , FL • August 15, 2015
After searching for hours online, I finally found a you tube video called: Diagnose & Repair a Bad Latch on a Frigidaire Dishwasher (GLD2250RDC4) . His explanation and directions were sooo easy and it worked! So I didn't have to call a repairman or buy a new control panel and the part cost $30.00, Easy!
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8269117
Broken or loose dishwasher door latch handle? This replacement secures your door for proper operation. Easy 15-minute DIY fix with video guidance.
Do-It-Yourself Stories from Customers like You
Broken dishwasher handle Danny T. • Brigham City , UT • January 29, 2015
Followed instruction I saw on a you-tube video. Was quick and easy.
Read more
More
Genuine Bosch part
By: Bosch
Part Number: 00438026
Fix a dishwasher door that won't latch or stay closed. This door latch assembly secures the door during operation. DIY repair in 15-30 minutes.
Do-It-Yourself Stories from Customers like You
Broken latch Jon T. • Concord , MA • August 27, 2017
Replaced with new latch, took about 5 minutes. T25 torx screwdriver and flathead screwdriver needed.
Read more
More
Genuine Bosch part
By: Bosch
Part Number: 00166630
Detergent dispenser door won't stay closed? This latch secures the detergent cup during wash cycles. Simple DIY repair with video guidance included.
Do-It-Yourself Stories from Customers like You
Soap dispenser did not stay closed Petra G. • West Chester , PA • October 18, 2014
After having seen the video I installed the new lid and it worked.
Read more
More
Genuine Ge part
By: Ge
Part Number: WD12X10122
Replacement cap that seals the rinse aid dispenser on your dishwasher door. Replace if cracked, broken, warped from heat, or missing to prevent leaks.
Do-It-Yourself Stories from Customers like You
The vent part was broken and woulkd not stay in its place and kept falling out the rinse aid cap was broken also and ended up falling on the he4ating element and burnt Martha R. • Spring , TX • February 08, 2015
This was very simple. Thgey just popped back into place asnd the cap screws in.
Read more
More
Genuine Bosch part
By: Bosch
Part Number: 00489674
Dishwasher door loose or cracked when opening? This handle replacement clips into place on the fascia panel. DIY-friendly repair in 15-20 minutes.
Do-It-Yourself Stories from Customers like You
Broken fascia on Bosch dishwasher. Jerry's W. • Washougal , WA • November 19, 2017
The old fascia had broken and been torn off. I should have saved the buttons from it, but I didn't know that I'd be repairing it - I figured I would have to replace the unit. Well, money is tight, so I got the model number from the unit and looked up parts online. I couldn't find the exact model number on this site, but the picture of the fascia looked just like the picture in my manual, so I bought it, a handle strip, and a new set of buttons.
I pulled the stainless panel off the front, then...
Read more
More
Genuine Ge part
By: Ge
Part Number: WD13X10045
Door won't open or handle feels loose? The handle actuator links your dishwasher handle to the latch. Easy DIY repair, typically under 1 hour with video.
Do-It-Yourself Stories from Customers like You
Dishwasher stopping mid cycle and beeping Robert D. • Lincoln , NE • January 30, 2015
I got on the site and shared my issue. It was determined my door switches were bad, as well as my actuator. I ordered the parts (which arrived in just 2 days!) and I fixed it myself in just under 10 minutes, for under $30.00. Thanks guys!!!!
Read more
More
Genuine Ge part
By: Ge
Part Number: WD16X10011
Detergent cup won't stay closed? This dispenser latch secures the detergent cup during wash cycles. Direct replacement part with video guide available.
Do-It-Yourself Stories from Customers like You
Soap dispenser wouldn't close door kept falling down Graeme M. • Branford , CT • October 07, 2017
First replaced the latch, spring, and lever, but no improvement. Then I saw the lever arm on the other half of the door, which by position had to be the way that the timer interacts with the soap dispenser. After turning off the power to the dishwasher, I removed the switch cover (not obvious how -- a video would help: on the left, I slid the narrow rectangular plastic wire cover a little to one side and gently opened it on its little hinge, which is near the left side of the door, and then...
Read more
More
Genuine Ge part
By: Ge
Part Number: WD16X313
Dishwasher detergent cup won't stay closed or won't open fully? This soap dispenser lever controls detergent release. DIY repair in 15 minutes.
Do-It-Yourself Stories from Customers like You
Soap dispenser wouldn't close door kept falling down Graeme M. • Branford , CT • October 07, 2017
First replaced the latch, spring, and lever, but no improvement. Then I saw the lever arm on the other half of the door, which by position had to be the way that the timer interacts with the soap dispenser. After turning off the power to the dishwasher, I removed the switch cover (not obvious how -- a video would help: on the left, I slid the narrow rectangular plastic wire cover a little to one side and gently opened it on its little hinge, which is near the left side of the door, and then...
Read more
More
Genuine Ge part
By: Ge
Part Number: WD13X10003
If your dishwasher won't start or the door won't lock, the door latch assembly is likely failed. DIY-friendly repair takes about 30 minutes to replace.
This part fixes the following symptoms
-
Won't start
-
Door latch failure
-
Door won't close
See more...
Do-It-Yourself Stories from Customers like You
My ge performance plus dishwasher quit working the control panel would not light up and allow me to choose a cyle to run Jeff J. • Lex , KY • March 11, 2015
With the power to the dishwasher on, I removed the six or seven screws holding the door panel together. With the door separated, I manually moved the switch which should close when the dishwasher latch closes. This illuminated and activated the control panel telling me that the problem was in the door latch. I purchased a new latch from appliance parts pros and installed it. Very easy fix for a homeowner, taking thirty minutes.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10455271
Fix water leaking from the bottom or poor cleaning in lower rack. This dishwasher diverter cover protects internal valve components. Moderate DIY repair.
Do-It-Yourself Stories from Customers like You
Leaked water onto diverter motor(bottom center) Mark D. • Milan , NH • November 23, 2019
Replaced sump because the seal is not sold separately. You will need a skinny clamp after cutting the original swaged clamp off. Also Had to replace the cover as its seal is not sold separately either. Used dish soap on seals during assembly.
Read more
More
Genuine Bosch part
By: Bosch
Part Number: 00166621
Fix a detergent dispenser door that won't stay closed or pops open during the wash cycle. This lid replacement is a simple DIY repair with no tools needed.
Do-It-Yourself Stories from Customers like You
Soap dispenser did not stay closed Petra G. • West Chester , PA • October 18, 2014
After having seen the video I installed the new lid and it worked.
Read more
More
Genuine Ge part
By: Ge
Part Number: WD09X21321
Fix a cracked or broken dishwasher handle that won't open properly. Requires removing front panel with torx and hex screws. Video guide available.
Do-It-Yourself Stories from Customers like You
Dishwasher needed new handle and console cover. Steven S. • Wheaton , IL • October 26, 2020
Reviewed repair via youtube. Disconnected the dishwasher power and water. Removed dishwasher from under the cabinet. Removed and disassembled the door and then made the repair. The last step reinstalled the door and dishwasher.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 676413
Fix a detergent dispenser that won't open or close properly with this latch kit. Includes all components for secure closure. 10-15 minute repair.
Do-It-Yourself Stories from Customers like You
Latch would not open consistently on detergent dispenser James G. • Waxhaw , NC • January 12, 2015
Appeared to be two problems: the latch was worn and one of the pins that slid in a guide on the actuator located in the inner panel had broke off. Detergent lid spring and pin appeared to be OK but decided to replace since I was aready working on it. I ordered all the inner panel mechanism from the control arm to the latch actuator on the inner panel. The repair was successful as the detergent dispenser now opens during its cycle.
Read more
More
Genuine Ge part
By: Ge
Part Number: WD12X10284
The Fill Cap Assembly is an OEM part for GE dishwashers. This assembly includes the cap that covers the opening where rinse aid or other additives are poured into the dishwasher. It ensures that the additives are securely contained and properly dispensed during the wash cycles, contributing to effective cleaning and drying.
Over time, the fill cap assembly can become damaged due to regular use, exposure to cleaning agents, or accidental mishandling. A compromised fill cap can lead to leaks or improper dispensing of rinse aid, affecting the dishwasher's performance.
Symptoms of a bad fill cap assembly include:
- Rinse aid or additives leaking from the dispenser
- The cap not securing properly or coming off easily
- Improper dispensing of rinse aid
- Visible cracks or damage to the cap
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
This part fixes the following symptoms
-
Will not dispense detergent
See more...
Do-It-Yourself Stories from Customers like You
1 not draining properly 2 not cleaning properly 3 not filling properly 4 not running properly 5 sump and sump cap was filthy 6 James W. • San Diego , CA • March 19, 2017
1. Replaced the Dishwasher motor and pump assembly. 2. Replaced the lower arm sprayer. 3. Replaced the Sump and filter. Replaced both the inlet and outlet hoses. 4. Replaced the Airgap. 5. Replaced Float Dome. 6. Replaced Water Inlet Valve.
Parts $220 for Dishwasher
Estimated Labor $400.00
Labor $0.00
Parts $100.00 for Pullout Faucet
Estimated Labor $175.00
Labor $0.00
Read more
More