Dishwasher Latch Switch Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304504077
The Pressure Sensor is an OEM part for Frigidaire dishwashers. It monitors the water pressure within the dishwasher to ensure optimal performance during the wash cycle.
Causes of a bad pressure sensor can include electrical faults, buildup of debris or mineral deposits, or general wear and tear from regular use.
Symptoms of a bad pressure sensor include:
- Poor cleaning performance
- Dishwasher not filling with water properly
- Error codes related to water pressure
- Dishwasher stopping mid-cycle
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
If yor fridgidaire dishwasher is showing an i30 error code do not assume there is a leak Kenneth T. • Vineland , NJ • April 24, 2017
I had to pull and clean the pressure sensor switch four times in a year. Each time more gunk accumulated. When that happens the sensor does not close the water valve. The dishawsher keeps filling and the water comes out through the overfill port. The water then goes in the catch basin under the washer and floats the emergency switch. This cuts off the water but keeps the pump running just in case. Tripping the circuit breaker is only a temp fix. What happens is the water level may have...
Read more
More
$85.95
- Compare At:
-
$101.42
- You Save:
-
$15.47
Genuine Lg part
By: Lg
Part Number: 3W40025L
The Dishwasher Micro Switch is an OEM part for LG dishwashers. It plays a crucial role in detecting the door's position, ensuring the dishwasher only operates when the door is securely closed. This switch helps maintain safety and proper functioning during the wash cycle.
Causes of a bad micro switch can include wear and tear from regular use, electrical malfunctions, or physical damage. A compromised micro switch can prevent the dishwasher from starting or stopping correctly.
Symptoms of a bad dishwasher micro switch include:
- The dishwasher not starting or stopping unexpectedly
- Error codes related to door issues
- The door not locking securely during operation
- Unresponsive control panel or buttons
This OEM LG part is also compatible with Sears/Kenmore models.
Do-It-Yourself Stories from Customers like You
Lg dishwasher “ne” or “ue” error code (vario spray arm). Dimitri T. • Cranston , RI • February 26, 2019
This was a very simple repair. It was done in about an hour. It involves disconnecting the dishwasher, emptying the water from the inside, taking it out and flipping it over, and replacing the diverter motor. This repair is done on the underside of the dishwasher, nothing to disconnect inside (just remember to remove the baskets). It would be wise to order the motor seal and micro switch that goes with it as they are all cheap parts and easy to swap out during the procedure. Be sure to take...
Read more
More
$16.75
- Compare At:
-
$19.93
- You Save:
-
$3.18
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10487697
Restore smooth, consistent motor operation with this 120V electronic speed control board. It regulates power to the motor so selected speeds engage properly and stay steady, helping your appliance run reliably across all settings. What it does:
- Regulates power to the motor for accurate speed selection
- Helps maintain steady RPM under load
- Common symptoms: runs only one speed, won't change speeds, surges or pulses
- Resolves intermittent operation when the motor has power but won't run
What's included:
- 1 speed control board assembly
Install notes:
- Disconnect power before servicing; work in a dry area
- Handle the board by the edges to avoid static damage
- Move wires from the old board to the new one one-by-one; take reference photos
- Some models require speed calibration after installation—follow the service instructions
Do-It-Yourself Stories from Customers like You
Intermittent speed control on kitchenaid 7qt stand mixer Anthony C. • Westminster , CO • November 26, 2014
Unplug the unit from power.
Remove decorative aluminum band from motor enclosure by removing single screw at rear of mixer.
Remove screws (now exposed) which secure the top half of the motor enclosure.
Using a 1/8" punch, tap-out the pin that penetrates the planetary gear cover and the motor shaft (takes some finesse to avoid damage to the painted/coated planetary. It is a tight fit!) This will allow the planetary gear and cover to drop.
Now the motor and gear unit can be removed. Do so...
Read more
More
$139.95
- Compare At:
-
$167.94
- You Save:
-
$27.99
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9743903
The Door Handle is an OEM part for Whirlpool dishwashers. It provides a sturdy grip for opening and closing the dishwasher door, ensuring easy access to the appliance.
Causes of a bad door handle can include wear and tear from frequent use, accidental impact or force, and material fatigue over time.
Symptoms of a bad door handle include:
- The handle feeling loose or wobbly
- Difficulty in opening or closing the dishwasher door
- Visible cracks or damage on the handle
- The handle not engaging the door latch correctly
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Handle clips broke and washer got locked shut R B. • St Augustine , FL • January 28, 2017
Had to remove the screws that hold the dish washer to the counter top by knocking them out of the counter top. After seeing how the door handle worked I will not have to do again as all you have to do to open is stick a long screw driver up inside and push the chip and it opens. Ordered handle installed it now everything works fine. $29.00 for little plastic handle seems quiet rediculous but Kitchenaid and parts direct where $39.00 so I guess I got a bargain. As for the tools you a trox driver...
Read more
More
$64.60
- Compare At:
-
$77.52
- You Save:
-
$12.92
Genuine Bosch part
By: Bosch
Part Number: 00611665
The Float Switch is an OEM part for Bosch dishwashers. This part monitors the water level inside the dishwasher. It helps prevent overflows by detecting when the water level gets too high and signaling the control board to stop filling and start draining the water.
Causes of a bad float switch can include wear and tear from regular use, buildup of debris or mineral deposits, or electrical malfunctions.
Symptoms of a bad float switch include:
- The dishwasher not filling with water
- Water overflowing from the dishwasher
- The dishwasher not advancing through the cycles
- Error codes related to water level issues
This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
More
$14.95
- Compare At:
-
$17.64
- You Save:
-
$2.69
Genuine Bosch part
By: Bosch
Part Number: 00424410
The On/Off Switch is an OEM part for Bosch dishwashers. It provides the function of powering the unit on or off with the press of a button.
Causes can be normal wear over thousands of cycles or moisture damage compromising electronics. Physical impact could also affect switch operation over time.
Symptoms of a bad on/off switch include:
- The dishwasher failing to start wash cycles when the switch is engaged
- Washers inadvertently stopping mid-cycle or short cycling irregularly
- The control panel lighting/interface malfunctioning or unresponsive
This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.
Do-It-Yourself Stories from Customers like You
The switch stopped working Kirk B. • Pelham , AL • March 24, 2014
Initially performed troubleshooting over the phone with Bosch customer support and did preliminary research on the web. Ultimately had to call out service technician to isolate/confirm problem. He confirmed the problem was most likely the switch (if not, the actually computer processor) and gave me the part number (since it was going to take 10 BD's for him to get the part). I ordered through Appliance Parts Pros and received the part in only 2 days. However, upon trying to install it, I...
Read more
More
$60.95
- Compare At:
-
$73.14
- You Save:
-
$12.19
Genuine Ge part
By: Ge
Part Number: WD13X10031
This dishwasher door latch secures the door closed and engages the safety interlock so wash cycles can start and run without leaks or interruptions. Replace a worn or broken latch to restore a firm, reliable door closure. What it does:
- Locks the door to compress the tub gasket and help prevent leaks
- Engages the door switch/interlock so the control can start and continue cycles
- Replaces latches that are cracked, bent, or have weakened/broken springs
- Common symptoms: door won't latch/close, cycle won't start, door pops open mid-cycle, water seeping from the top of the door
What's included:
Install notes:
- Disconnect power and shut off water before servicing
- Open the door and remove inner door panel screws to access the latch
- Note spring and linkage orientation; transfer any reused hardware from the old latch
- Align with the door strike and test closure before fully reassembling
Do-It-Yourself Stories from Customers like You
Control box and panal Heidi P. • Fairfield , CT • January 25, 2016
Always a success with appliance parts pro! Be it the dishwasher, stove, fridge or what have you, I get great advice and instruction on how to trouble shoot and help ordering parts. Best is that if I trial a part and that wasn't the problem, the part is able to be sent back and refunded. I love this company. Instead of dumbing things down and robbing you blind, they teach you how things work and challenge you to fix something and feel great about it. Can't say enough about your guys. Thank...
Read more
More
$74.73
- Compare At:
-
$89.68
- You Save:
-
$14.95
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10321839
This pocket-style door handle provides the recessed grip used to open and close the appliance door. Replacing a cracked or missing handle restores a clean look and a secure, comfortable grasp for everyday use. What it does:
- Provides a built-in finger pocket for reliably opening and closing the door
- Replaces a broken, cracked, loose, or missing handle
- Helps resolve difficulty gripping the door or sharp/rough edges from damage
- Maintains proper look and prevents stress on adjacent trim or panels
What's included:
- 1 pocket-style door handle
Install notes:
- Disconnect power to the appliance before servicing.
- Open the door and remove the screws/clips retaining the old handle; note orientation and placement.
- Reuse the existing fasteners/brackets as required and align the new handle carefully.
- Tighten fasteners snugly without overtightening; verify smooth door operation.
Do-It-Yourself Stories from Customers like You
Broken latch and handle Christine T. • Porterville , CA • August 03, 2018
Removed control panel where latch and handle are located beneath. Removed front cover plate of dishwasher to reach last handle screw and removed a wire connector to the latch. Then replaced parts in reverse order of disassembly.
Read more
More
$62.53
- Compare At:
-
$73.79
- You Save:
-
$11.26
Genuine Frigidaire part
By: Frigidaire
Part Number: A00055408
The Pressure Switch is an OEM part for Frigidaire dishwashers. It plays a crucial role in monitoring water pressure inside the dishwasher, signaling the control module when to activate various components during the wash and rinse cycles. Overl or under pressure conditions could damage the dishwasher or prevent it from cleaning properly.
Symptoms of a bad pressure switch include:
- Dishes not getting fully clean
- Cycles not completing or getting stuck
- Error codes displaying
- Strange noises or leaks coming from the dishwasher
Causes of a bad pressure switch can be wear and tear over time, mineral buildup interfering with the switch's function or accidental damage from household chemicals or objects left in the dishwasher.
This OEM Frigidaire replacement part is designed to function like the original part for reliable performance. It is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Leaking dishwasher. Richard W. • Louisville , KY • April 20, 2020
Replace the pressure switch.
Read more
More
$61.95
- Compare At:
-
$73.10
- You Save:
-
$11.15
Genuine Frigidaire part
By: Frigidaire
Part Number: A00104102
This replacement latch secures the door closed so the appliance can operate correctly. Restores a positive close and consistent door recognition to help prevent no-starts and intermittent operation. What it does / common symptoms:
- Engages the strike to hold the door/panel closed
- Ensures the door-closed signal is made so controls can run
- Worn or broken latch may cause the door not to stay shut
- Unit may not start, show a "door" message, or stop if the door is bumped
What's included:
Install notes:
- Disconnect power before servicing; turn off water supply if applicable
- Access the latch per model—typically behind the front panel or inner door liner
- Note and transfer any springs/clips from the original latch to the new one
- Verify smooth open/close and proper strike engagement before testing operation
Do-It-Yourself Stories from Customers like You
Broken dishwasher latch. Michael M. • Middle River , MD • January 24, 2018
I always come to Appliance Parts Pros for my parts. Ordered the handle, and it arrived in a few days. Took me all of 10 minutes to replace the worn part. Even picked up a new tub gasket while I was at on here. That has made the washer a lot less noisy. I recommend these guys to anyone who is even a novice DIYer.
Read more
More
$68.37
- Compare At:
-
$82.04
- You Save:
-
$13.67
Genuine Whirlpool part
By: Whirlpool
Part Number: WP99002839
Color: Black
Do-It-Yourself Stories from Customers like You
Some parts had melted on the dishwasher rack Steve O. • Red Wing , MN • June 04, 2015
I ordered the parts using the make and model no.s and found it quickly at AppliancePartsPros.com. The parts were correct and snap into place in just 5 minutes I was done and the dish rack worked great. I also ordered a new handle since the old one broke out in the middle about 2 years ago. This repair took another 5 minutes and is working great. Thanks
Read more
More
$65.65
- Compare At:
-
$78.12
- You Save:
-
$12.47
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8268909
Overfill control.
Do-It-Yourself Stories from Customers like You
Washer would not fill with water Ty J. • Hillsboro , OR • July 08, 2018
Replaced float switch and also replaced intake valve. Worked like a charm and the process was as easy as the YouTube video I followed made it seem.
Read more
More
$45.95
- Compare At:
-
$54.22
- You Save:
-
$8.27
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10329510
Color: Black - For White order WPW10401479 and for Bisque order W10401480.
Do-It-Yourself Stories from Customers like You
The plastic handle and control panel mounts broke on Maytag dishwasher Cory C. • Potomac Falls , VA • February 20, 2017
I found the part numbers for both pieces on an appliance repair forum. Looked the parts up on AppliancePartsPros.com. Ordered the two parts. Fast processing. Fast shipping. The exact OEM replacement parts arrived and installed just like the original.
Read more
More
$61.54
- Compare At:
-
$73.23
- You Save:
-
$11.69
Genuine Bosch part
By: Bosch
Part Number: 00611312
The Sensor is an OEM replacement part for Bosch dishwashers. It detects soil levels through cycles, automatically adjusting water volumes and times for optimal cleaning. Precise sensing reduces overwashing.
Causes of a bad sensor involve general deterioration from continuous usage monitoring wash parameters thousands of times. Dirt or debris accumulation triggers false readings, decreasing efficiency.
Symptoms of a bad sensor include:
- Extended cycle times as improper inputs cause system delays
- Inconsistent wash results relying on default static cycle settings
- Error codes displayed indicating disrupted functionality
- Soiled dishes from inadequate adjustments meant for heavier loads
This OEM Bosch part maintains customized cleaning for Thermador versions as well.
Do-It-Yourself Stories from Customers like You
Dishwasher would not start. Jason M. • Florence , SC • November 30, 2020
REPLACED DOOR LATCH AND DOOR LATCH ASSEMBLY. EVERYTHING WORKS AGAIN.
Read more
More
$34.95
- Compare At:
-
$41.59
- You Save:
-
$6.64
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304532796
This strike is the receiver the door latch engages with to keep the door securely closed. A properly aligned strike helps the appliance recognize a closed door so cycles can start and run without interruption. What it does
- Provides the catch point for the door latch to secure the door during operation
- Helps align the latch for smooth, consistent engagement
- Ensures the door-closed switch can be activated so the unit can start
- Worn, bent, or broken strikes can cause the door not to latch, pop open, or trigger door-open errors
What's included
Install notes
- Disconnect power before servicing; follow manufacturer safety procedures
- Note the strike's orientation and any shims/spacers before removal
- Reuse existing mounting hardware unless your model specifies otherwise
- After installation, check alignment and the latch engages smoothly without force
Do-It-Yourself Stories from Customers like You
Dishwasher wouldn’t turn on. Door won’t latch no lights on control panel. Nikki B. • White Cloud , MI • July 20, 2019
I have a Kenmore dishwasher and this is the second time doing this repair. The dishwasher door wouldn’t click in place when closed and the lights on the control panel wouldn’t turn on. My kids like to push on the handle to get onto the counter causing the latch assembly piece to break after awhile. It’s a simple fix with the hardest part being getting the front panel lined back up to put back on. I ended up not needing the strike piece but got it just in case it had been bent.
Read more
More
$14.95
- Compare At:
-
$17.79
- You Save:
-
$2.84
Genuine Bosch part
By: Bosch
Part Number: 00615350
The Handle-Cap is an OEM part for Bosch dishwashers. It provides a contact point to open and access the dishwasher. As the cap wears through repeated use, it can impact usability.
Causes of a bad handle cap include typical wear over time. Harsh chemicals or impact can also damage this exterior part.
Symptoms of a bad handle cap are:
- Loose or improper fit that's uncomfortable
- Sharp edges or broken surfaces that could cut
- Discoloration or corrosion reducing aesthetic
- Difficulty opening the dishwasher door
This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.
Do-It-Yourself Stories from Customers like You
Broken handle end cap on bosch diswasher Thomas R. • Oak Island , NC • July 20, 2015
One end cap was broken but I ordered 2 since the shipping was the same price. I replaced both by removing the Tork screws on both sides of the door panel (one side at a time). There was a bolt on the inside panel of the door that secured the end cap. I replaced the end cap and tightened the bolt moderately so as to not crack the plastic end cap. Total job was 30 mins replacing both end caps and including figuring out how to get to them.
NOTE - be careful to not open the door panel sections...
Read more
More
$11.95
- Compare At:
-
$14.10
- You Save:
-
$2.15