Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Dishwasher Cap Handle Parts

Dishwasher Sump Cover
Genuine Ge part
By: Ge
Part Number: WD12X417

Protective cover that sits over your dishwasher's pump inlet to screen debris. Replace if cracked, broken, or missing to protect internal components.

Do-It-Yourself Stories from Customers like You 1 not draining properly 2 not cleaning properly 3 not filling properly 4 not running properly 5 sump and sump cap was filthy 6   James W. • San Diego , CA • March 19, 2017

1. Replaced the Dishwasher motor and pump assembly. 2. Replaced the lower arm sprayer. 3. Replaced the Sump and filter. Replaced both the inlet and outlet hoses. 4. Replaced the Airgap. 5. Replaced Float Dome. 6. Replaced Water Inlet Valve. Parts $220 for Dishwasher Estimated Labor $400.00 Labor $0.00 Parts $100.00 for Pullout Faucet Estimated Labor $175.00 Labor $0.00 Read more

More
$26.95

IN STOCK
Ships Today Guaranteed

Most orders arrive by Tuesday, November 24

Add to Cart
Dishwasher Dispenser Door Latch And Grommet Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: W10131752

Fix dispenser door that won't latch or leaks at the door bottom. This grommet and latch kit stops water leaks. Requires inner door panel removal.

Do-It-Yourself Stories from Customers like You Dishwasher was leaking from underneath the front door   Don G. • Crystal Lake , IL • June 04, 2014

The grommet was old and very caked with old dishwasher scum. So water was leaking through where the soap door latch goes into the door. I replaced the rubber grommet (and the plastic latch that came with the kit, even though the old one was probably fine). Fit perfectly and looked just like the old one. Works like a champ, no leaking! Read more

More
$5.37

IN STOCK
Ships Today Guaranteed

Most orders arrive by Tuesday, November 24

Add to Cart
Dishwasher Door Latch And Strike Plate Assembly
Genuine Bosch part
By: Bosch
Part Number: 00419827

Fix a dishwasher door that won't close or latch properly. This latch and strike plate assembly restores secure door closure and safe operation.

This part fixes the following symptoms
  • Won't start
See more...
Do-It-Yourself Stories from Customers like You Would not drain   Joseph K. • Baldwinville , MA • July 10, 2015

Replaced check valve, was broken off and plugged the drain Read more

More
$24.66

IN STOCK
Ships Today Guaranteed

Most orders arrive by Tuesday, November 24

Add to Cart
Dishwasher Door Latch And Lock Assembly
Genuine Lg part
By: Lg
Part Number: 4026DD3001A

Fix a dishwasher door that won't stay shut or cycles that won't start. This door latch and lock assembly restores secure closure and cycle operation.

Do-It-Yourself Stories from Customers like You The door latch wasn't staying shut.   Jay M. • Washington , DC • January 25, 2022

Replaced the door latch & door lock. Went really well and the dishwasher is working now. Read more

More
$51.95

IN STOCK
Ships Today Guaranteed

Most orders arrive by Tuesday, November 24

Add to Cart
Dishwasher Door Latch Handle
Genuine Whirlpool part
By: Whirlpool
Part Number: WP99002837

Fix a dishwasher door that won't open or close properly with this door latch handle. Simple DIY repair, typically completed in 10-15 minutes.

Do-It-Yourself Stories from Customers like You Door handle on 2002 model maytag dishwasher broken   Thomas H. • Fort Worth , TX • October 17, 2014

I called a local repair center who estimated $300+ to fix this. I bought a door handle and door latch for $~100 and fixed my dishwasher in about 10 mins. I ordered the parts on Sunday, they arrived on Tuesday. Very happy with appliance parts pros and would recommend them. Read more

More
$69.95

IN STOCK
Ships Today Guaranteed

Most orders arrive by Tuesday, November 24

Add to Cart
Pump Housing, Rear (Softer Bearing)
Genuine Bosch part
By: Bosch
Part Number: 00267739

Rear pump housing for the washer drain/pump assembly. Replaces the worn rear housing that supports the impeller and bearing, helping restore proper draining and reduce leaks or unusual pump noises when the housing fails. What it does:

  • Houses and supports the pump impeller and bearing, forming the rear half of the drain pump assembly.
  • Restores a sealed mounting surface to help prevent water leaks from the pump area.
  • Helps re-establish correct water flow and draining when a cracked or worn housing impairs the pump.
  • Addresses symptoms such as poor or no draining, water at the base of the appliance, or loud/grinding pump noises.
What's included: One rear pump housing. Install notes:
  • Disconnect power and shut off water supply before starting; drain any standing water to avoid spills.
  • Remove the washer access panels and pump assembly; transfer the impeller, seals, and any hardware as required.
  • Inspect and replace pump gaskets/seals and the impeller if worn; tighten mounting fasteners to OEM torque where specified.

Do-It-Yourself Stories from Customers like You Very little water pressure coming from spray arms only sprayed about 6"   Kevin H. • San Antonio , TX • August 18, 2019

Our Bosch suddenly quit washing the dishes properly after 15 years of faithful service. I observed that there was no pressure coming from the sprayers, and determined it to be the circulating pump. I could reach into the pump from inside the dishwasher and could feel that something was loose in there - the impeller moved when pumping, but I could stop it with my finger. When I took the pump out and disassembled it, the impeller was in two pieces (the front and back pieces that are supposed... Read more

More
$35.49

IN STOCK
Ships Today Guaranteed

Most orders arrive by Tuesday, November 24

Add to Cart
Pump Housing
Genuine Ge part
By: Ge
Part Number: WD19X10020

For single drain outlet models only. For dual outlet port models you must order the complete pump and motor WD26X10013.

More
$77.23

IN STOCK
Ships Today Guaranteed

Most orders arrive by Tuesday, November 24

Add to Cart
Dishwasher Door Handle
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10195718

Fix a broken or cracked dishwasher door handle with this direct replacement part. Basic hand tools needed. Remove 4-8 screws to install in 20-30 minutes.

Do-It-Yourself Stories from Customers like You Pull handle broken   Tim O. • Jenks , OK • March 08, 2016

4 Torx screws on the panel at top seen when door open. This is an important repair, though it would have been easier to leave as it was. The control or selection panel is right on the front and is stressed each time you open it. If you feel the front panel is flexing more than it should, check this piece for broken tabs and replace if gone. Read more

More
$64.70

IN STOCK
Ships Today Guaranteed

Most orders arrive by Tuesday, November 24

Add to Cart
Dishwasher Detergent Dispenser Actuator Lever
Genuine Ge part
By: Ge
Part Number: WD12X324

Detergent cup not opening during wash cycle? This actuator lever connects the timer to the dispenser lid. Moderate DIY repair, about 35 minutes.

This part fixes the following symptoms
  • Will not dispense detergent
See more...
Do-It-Yourself Stories from Customers like You Soap door would not lock closed   Mark F. • Laguna Woods , CA • September 18, 2017

This happened after a repair man came out and replaced the timer. Not my doing landlord had a service contract. Once inspected I found when the timer was swapped he did not swap the cam over. Ordered the correct parts and repaired myself. Hard to find good help anymore. Read more

More
$12.54

IN STOCK
Ships Today Guaranteed

Most orders arrive by Tuesday, November 24

Add to Cart
Dishwasher Blower Cover
Genuine Lg part
By: Lg
Part Number: 3550ED3011B

Mounts over the dishwasher's drying fan vent opening to shield the blower and direct airflow into the tub. Replace if cracked, damaged, or missing.

Do-It-Yourself Stories from Customers like You Door spring pulleys broke on our lg dishwasher   Leigh C. • Bemidji , MN • March 22, 2015

I looked up my unit and reviewed the schematic drawing online at Appliance Parts Pro. Once receiving the parts, I Pulled out the dishwasher and removed side panels - didn't even have to disconnect anything. Removed broken parts and replaced them with the new - took about 10-15 minutes start to finish. Easy cheesy! Owning LG appliances I'm thankful to have found a resource like Appliance Parts Pro! I plan to use them for all my other LG repairs because they make it so easy to find parts. Read more

More
$15.34

IN STOCK
Ships Today Guaranteed

Most orders arrive by Tuesday, November 24

Add to Cart
Dishwasher Detergent Dispenser Assembly
Genuine Samsung part
By: Samsung
Part Number: DD59-01001A

This is the complete detergent dispenser assembly for a dishwasher, responsible for holding and releasing detergent and rinse aid at the appropriate time during the wash cycle. It includes the dispenser housing, lid, and internal mechanisms. Replace this assembly if the dispenser door fails to open during the cycle, detergent is not dispensing properly, or the latch mechanism is broken or cracked.

This part fixes the following symptoms
  • Will not dispense detergent
See more...
Do-It-Yourself Stories from Customers like You Soap dispenser flap didn't open   Bill R. • Austin , TX • April 06, 2014

Removing the door panel was easy -- remove 6 Torx screws, and the panel falls off. Next you need to remove an electrical plug and 2 individual wires from the old dispenser. The plug came right off, but the wires were not easy to access, and they fought me more than I expected. With some pliers and wiggling, they eventually let go and came free. The dispenser is held in place with 6 Phillips screws through 2 removable metal brackets, and those came out easily. The toughest part of the job... Read more

More
$128.95

IN STOCK
Ships Today Guaranteed

Most orders arrive by Tuesday, November 24

Add to Cart
Dishwasher Drain Solenoid Housing
Genuine Ge part
By: Ge
Part Number: WD21X10356

Plastic housing that secures the drain solenoid to the pump assembly. Replace if cracked, broken, or missing to properly position the solenoid mechanism.

Do-It-Yourself Stories from Customers like You Water dripping into washer after completing a load would have to do an extra spin to get rid of excess water.   Ernest B. • Gibson , LA • November 16, 2017

Viewed you video on Youtube.com and saw how easy it was to change out the triple water valve. Job completed and working like a charm now. Read more

More
$6.72

IN STOCK
Ships Today Guaranteed

Most orders arrive by Tuesday, November 24

Add to Cart
Dishwasher Door Latch Handle
Genuine Whirlpool part
By: Whirlpool
Part Number: WP99002836

Fix a hard-to-open dishwasher door or broken handle with this latch handle. Simple 30-minute repair—remove inner door panel and snap into place.

Do-It-Yourself Stories from Customers like You Door latch handle was broken   Michael F. • Flint , MI • June 20, 2014

Removed the interior panel and door latch. snapped the door handle into the latch and installed latch and door panel. Read more

More
$74.95

IN STOCK
Ships Today Guaranteed

Most orders arrive by Tuesday, November 24

Add to Cart
Dishwasher Outer Door Panel Cover
Genuine Whirlpool part
By: Whirlpool
Part Number: W10463895

Replacement outer door panel cover for dishwashers. Restores exterior appearance and shields internal components. Needed when original is cracked or damaged.

More
$18.28

IN STOCK
Ships Today Guaranteed

Most orders arrive by Tuesday, November 24

Add to Cart
Dishwasher Dispenser Lid Assembly
Genuine Whirlpool part
By: Whirlpool
Part Number: W11651613

Detergent won't dispense or leaks during cycle? This dishwasher dispenser lid assembly seals the compartment and ensures proper opening. Quick fix.

More
$42.95

IN STOCK
Ships Today Guaranteed

Most orders arrive by Tuesday, November 24

Add to Cart
Dishwasher Detergent Dispenser Assembly
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10428214

This is the detergent dispenser assembly that mounts inside the dishwasher door and holds both liquid and powder detergent as well as rinse aid. It controls the timed release of detergent during the wash cycle. Replace this part if the dispenser door fails to open during the cycle, detergent remains in the cup after washing, or dishes are coming out dirty due to soap not being dispensed properly.

Do-It-Yourself Stories from Customers like You The hinge on the soap dispenser on the dishwasher broke off   John E. • College Corner , OH • April 23, 2014

I wrote down the model and serial # of the unit. I went on line to Appliance Parts Pros, and entered the data. Up popped a schematic with the part clearly numbered. I looked up the number, and ordered the part. Although the standard shipping said it would take 2 days, FedEx delivered the part the following day! I was able to unscrew the inside of the door, (took a special torx bit that I had to go to Ace Hardware to buy), then had to make another trip to Ace to get another special bit to... Read more

More
$91.23

IN STOCK
Ships Today Guaranteed

Most orders arrive by Tuesday, November 24

Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google