Dishwasher Waste Line Mover Traction Control Cable Parts

The User Interface Control Board is an OEM part for GE dishwashers. It is responsible for controlling and managing the settings and functions of the dishwasher. It allows users to select different wash cycles, adjust settings, and monitor the progress of the dishwasher.

A bad User Interface Control Board can occur due to electrical malfunctions, damage caused by power surges, or wear and tear over time. If the control board becomes unresponsive, displays error codes, or fails to operate the dishwasher properly, it may be time to replace the User Interface Control Board.

Symptoms of a bad User Interface Control Board include:

• Unresponsive buttons or touchpad.
• Error codes displayed on the control panel.
• Inability to select or change wash cycles.
• Display screen not functioning properly.

If you're experiencing any of these issues, it's time to replace the User Interface Control Board with this genuine GE part. Regain full control over your dishwasher's settings and ensure an efficient cleaning. This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

The Service Machine Control is an OEM component specifically designed for GE dishwashers. As the main control board, it regulates all wash cycles including temperature, filtration, spray arm rotation, drying functions and end of cycle signals.

Causes of a faulty service machine control include normal wear and tear over time. Electronic failures or water exposure from plumbing issues can also trigger malfunctions.

Symptoms of a failing control board are:

• Inability to progress through cycles fully
• Flashing error codes during washes
• Inconsistent wash and rinse performance
• Component damage from power overload issues

Replacing it with this genuine GE OEM part restores optimal cycle handling. Proper controls are essential for sanitizing every wash. The part is also compatible with Hotpoint, RCA and some Kenmore models.

The Main Control Board is an OEM replacement part for GE dishwashers. It serves as the central control unit for your dishwasher, responsible for coordinating and regulating various functions and cycles. It controls functions such as water temperature, cycle duration, and detergent dispensing. 

A bad Main Control Board can result in a range of issues, including cycle irregularities, error codes, or a complete failure of the dishwasher to function. Causes of a bad Main Control Board can include electrical failures, power surges, or damage due to moisture.

Symptoms of a bad Main Control Board include:

• Inconsistent or erratic cycle behavior
• Error codes or error messages displayed on the control panel
• Inability to start or complete a cycle
• Unresponsive control panel buttons

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Door Balance Link Kit is an OEM replacement part for Whirlpool dishwashers. This kit includes the necessary components to ensure proper balancing and operation of the dishwasher door.

Causes of needing to replace the door balance link kit include wear and tear over time, damage due to mishandling or impact, or issues with the door hinges or springs.

Symptoms that may indicate the need for a new door balance link kit include:

• The dishwasher door feeling loose or unstable
• Difficulty in opening or closing the door smoothly
• The door failing to stay in the desired position when opened

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dishwasher models.

Includes black knob

The Speed Control Assembly is an OEM part for Whirlpool mixers, integral to managing the mixing speed to accommodate various ingredients and recipes efficiently. This assembly is crucial for the precise control over the mixer's speed, ensuring that your mixing tasks are performed with the desired consistency and texture.   Speed Control Assembly has been updated by Whirlpool and no longer includes the ribbon attached. 

Common causes of a faulty Speed Control Assembly can vary, such as electrical problems resulting in erratic mixer speeds, wear and tear from regular usage, physical damage to the control assembly, or faulty wiring and connections within the mixer.

Symptoms of a bad Speed Control Assembly include:

• The mixer operates at one speed regardless of the setting
• Inability to adjust the mixer's speed
• The mixer fails to start or exhibits intermittent stopping during use
• Unusual noises or behavior when changing speeds

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Configured Service Machine Control Board is an OEM component designed specifically for GE dishwashers. It serves as the central processor that monitors all cycle phases including wash, rinse, dry, and sanitization. Precise controls are paramount for thorough cleaning performance.

The causes of a board needing replacement can relate to water exposure compromising electrical circuits over time. Regular operational wear may also induce failures.

Symptoms of a faulty control board involve:

• Inoperable or interrupted wash cycles
• Inaccurate temperature or unclear error codes
• Component damage from electrical overloads
• Signal issues preventing desired settings

The configured service machine control board is compatible with Hotpoint, RCA, and select Kenmore models.

The User Interface Control Board is an OEM part for GE dishwashers. It serves as the main control panel, allowing users to select and monitor various wash cycles and settings. This control board interfaces with the dishwasher's electronic system to ensure proper operation.

Causes of a bad control board can include electrical issues, exposure to moisture, or general wear and tear over time. Damage to the circuitry or components can also impair its functionality.

Symptoms of a bad user interface control board include:

• Unresponsive or malfunctioning buttons
• Display screen not working or showing incorrect information
• Inability to select or change wash cycles
• Dishwasher not starting or stopping unexpectedly

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Phase Control Board is an OEM part for Whirlpool mixers. It regulates the mixer's motor speed by controlling the electrical current flowing to the motor, ensuring precise speed settings and smooth operation. This board is essential for achieving consistent mixing results and handling various mixing tasks effectively.

Causes of a bad phase control board can include electrical surges, wear and tear from regular use, or component failure due to overheating. A faulty control board can lead to inconsistent speeds, affecting the mixer's performance and potentially damaging the motor.

Symptoms of a bad phase control board include:

• Inconsistent or erratic mixer speeds
• Mixer not starting or stopping unexpectedly
• Unusual noises or burning smells during operation
• Mixer operating at only one speed regardless of setting

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Note: This is the 120-volt phase control board. For the 240-volt board use W11174552.

The Configured UI Board is an OEM part for GE dishwashers. It serves as the central control unit, managing all operations of the dishwasher including cycles, temperatures, water levels, and timings. The UI board has all necessary wiring and components factory-installed to seamlessly interface with existing control panels and buttons.

Causes of a bad UI board can include water damage, cracked or loose circuitry, or failures of electronic components over time. Without a functioning UI board, the dishwasher cannot run cycles or sense user inputs.

Symptoms of a bad UI board include:

• The dishwasher not starting or running cycles
• Control panel malfunctions like unresponsive buttons or odd error codes
• Inability to select desired cycles or change settings
• Appliance failing to self-diagnose or display problems

This GE replacement part is compatible with Hotpoint, RCA, and some Kenmore models.

The Door Hinge Cable Assembly is an OEM replacement part for LG dishwashers. It consists of cables and springs that connect the dishwasher door to the tub, allowing controlled door opening and closing movements. The cable assembly allows for smooth opening and closing of the dishwasher door while providing counterbalancing weight to offset the door weight. It has 2-inch by 3/4-inch plastic pieces and an 8-inch rope section.

Causes of hinge cable failure stem from repeated opening/closing actions gradually fatiguing the cable material combined with potential corrosion developing on springs over years of use cycles.

Symptoms of a damaged hinge cable assembly include:

• Difficulty opening or closing the dishwasher door smoothly
• Door drifting open or slamming shut without control
• Visible slack, fraying or kinking in cable sections
• Rattling or grinding noises during door movements

This genuine LG assembly is also compatible with select Sears/Kenmore dishwasher models as well.

The Electronic Control Board is an OEM replacement part for GE dishwashers. This component acts as the command center, managing the various functions and cycles of the dishwasher, such as washing, rinsing, and drying. The control board processes user inputs and ensures that the dishwasher operates efficiently and effectively, coordinating all the internal systems to perform the selected wash programs.

Causes of a bad electronic control board can include electrical surges, moisture damage, or general wear and tear over time. Additionally, manufacturing defects or issues within the dishwasher’s electrical system can lead to failures in the board’s circuitry, disrupting the appliance's functionality.

Symptoms of a bad electronic control board include:

• The dishwasher not starting or responding to control panel inputs
• Error codes appearing on the display
• Interrupted or incomplete wash cycles
• The dishwasher not draining or filling properly
• Non-functional lights or indicators on the control panel

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Friction Pad is an OEM replacement part for Whirlpool dishwashers. It is a component located within the dishwasher door hinge assembly that is responsible for reducing friction and providing smooth operation as the door opens and closes. 

Friction pads can wear out over time due to repeated opening and closing of the dishwasher door. This repeated motion causes the pad material to break down gradually. If you notice increased resistance or noise when operating the door, or the door is not opening and closing as smoothly as before, it may be time to replace the friction pad.

Symptoms of a worn friction pad are:

• Difficulty opening or closing the dishwasher door  
• Increased noise or squeaking sounds when operating the door
• Resistance or binding feeling when moving the door
• Door not staying securely in place when fully opened or closed

This OEM replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The User Interface Control Button Assembly is an OEM part for Frigidaire dishwashers. This component is essential for the seamless operation of the dishwasher, allowing users to interact directly with the appliance by selecting wash cycles, starting operations, and adjusting settings. The assembly includes a set of buttons that are connected to the electronic control board, ensuring that inputs are accurately registered and executed. 

Causes of a failing User Interface Control Button Assembly include prolonged usage leading to wear and tear on the buttons, accidental spills or moisture that can damage the electronics, and potential wiring issues that affect signal transmission.

Symptoms of a malfunctioning User Interface Control Button Assembly include:

• Buttons failing to respond when pressed
• Random activation of functions or cycles
• Display issues or error messages indicating communication problems

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models, ensuring extended usability across multiple appliance brands.

The Timer is an OEM part for GE dishwashers. It controls the duration of the various cycles in the dishwasher, including wash, rinse, and dry cycles. By regulating these time intervals, the timer ensures that each phase of the dishwasher’s operation runs for the appropriate length of time, contributing to efficient cleaning and drying of dishes.

Causes of a bad timer can include electrical issues such as short circuits, worn-out contacts within the timer mechanism, or general wear and tear from regular use. These issues can prevent the timer from accurately controlling the cycle durations.

Symptoms of a bad timer include:

• Dishwasher not advancing through cycles
• Cycles running too long or too short
• Inconsistent cleaning or drying results
• Dishwasher stopping mid-cycle

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Timer is an OEM part for GE dishwashers. It controls the duration of the various cycles in the dishwasher, including wash, rinse, and dry cycles. By regulating these time intervals, the timer ensures that each phase of the dishwasher’s operation runs for the appropriate length of time, contributing to efficient cleaning and drying of dishes.

Causes of a bad timer can include electrical issues such as short circuits, worn-out contacts within the timer mechanism, or general wear and tear from regular use. These issues can prevent the timer from accurately controlling the cycle durations.

Symptoms of a bad timer include:

• Dishwasher not advancing through cycles
• Cycles running too long or too short
• Inconsistent cleaning or drying results
• Dishwasher stopping mid-cycle

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Door Cable is an OEM part for Frigidaire dishwashers. It is a component that connects the dishwasher door to the frame, controlling movement when accessing the tub interior.

Causes of a bad cable can be related to wear and tear over extended use, damage from faulty installation, impacts that deform the metal casing, or defects present since manufacture. Regular cycling of the door over many years places repeated stress on the cable.

Symptoms of a bad door cable: 

• Failure to open or close the door smoothly
• Lack of proper alignment
• Snapping/popping noises
• Door not sealing tightly against the gasket.

This OEM replacement part is also compatible with dishwashers made by Electrolux, Kenmore, and some KitchenAid models.