Dryer Waste Small Engine Ignition Coil Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP694424
If your dryer won't stay lit or shuts off after a few minutes, the gas limiter may be faulty. This regulator controls safe gas flow to the burner.
Do-It-Yourself Stories from Customers like You
I needed to convert from lp to natural gas Mark S. • Raleigh , NC • June 01, 2015
Removed LP Orifice and LP Gas limiter.
Orifice was easy, however the gas limiter was the tricky one because I had no instructions to what went where. I could not find anything online as to how to convert from LP to Natural Gas, but you could find several things as to how to convert from Natural to LP.
I ended up finding the Dryer schematic on line for the Whirlpool Duet natural gas dryer and was able to figure out what sequence the Spring, regulator and limiter went in. The order I just...
Read more
More
$27.37
- Compare At:
-
$32.84
- You Save:
-
$5.47
Genuine Ge part
By: Ge
Part Number: WE25M87
Converting your gas dryer from natural gas to propane? This LP conversion kit includes the orifice, regulator spring, and hardware needed for safe operation.
Do-It-Yourself Stories from Customers like You
I needed to convert over to propane from natural gas Armand T. • Tolar , TX • December 02, 2024
Ordered the conversion kit
Read more
More
$71.42
- Compare At:
-
$84.99
- You Save:
-
$13.57
Genuine Speed Queen part
By: Speed Queen
Part Number: D510184P
This is an igniter and bracket assembly, and it is intended for use in dryers. This is a genuine replacement part made by Speed Queen. The igniter is connected to the dryer on the back of the appliance, and it is used to heat the drying tub. A new igniter and bracket assembly might be needed if the dryer is unable to reach the correct temperature. If the heat in the dryer seems inconsistent during any drying cycle the igniter might be bad and will need to be replaced. For this repair the user will need access to the back of the appliance. Be sure the dryer is completely powered down and cooled before attempting to repair. This is an OEM part sourced directly from the manufacturer, and it is sold individually. It is compatible with Dryers made by Speed Queen.
Do-It-Yourself Stories from Customers like You
Needed a new ignitor. Robin B. • Arlington Heights , IL • May 30, 2020
Had handyman fix machine
Read more
More
$56.65
- Compare At:
-
$67.41
- You Save:
-
$10.76
Genuine Lg part
By: Lg
Part Number: 383EEL3002A
This conversion kit includes the components needed to convert a natural gas dryer to operate on liquid propane (LP) gas. It typically contains replacement orifices and any necessary fittings to adjust the gas flow for LP fuel. Use this kit if you are switching your dryer's fuel source from natural gas to propane, such as when moving to a home without a natural gas supply.
Do-It-Yourself Stories from Customers like You
Propane conversion Kenneth S. • Golden Valley , AZ • February 13, 2026
Change orifice
Read more
More
$25.76
- Compare At:
-
$30.65
- You Save:
-
$4.89
Genuine Whirlpool part
By: Whirlpool
Part Number: WP234826
Converting dryer from propane to natural gas? This orifice regulates gas flow in the burner assembly. Easy DIY fix, typically done in under 1 hour.
Do-It-Yourself Stories from Customers like You
Propane to natural gas conversion on range and dryer Vincent P. • Howell , NJ • October 09, 2014
Confirmed parts needed through online chat with tech and followed video instructions for dryer conversion. Found a video online for range conversion. Replaced orifices for stove top and adjusted oven burner orifices and air shutters and inverted pin in pressure regulator to natural gas position. All went well with no problems, about an hour and a half to gather tools and complete both jobs. Probably could be done faster but I was taking my time.
Read more
More
$34.75
- Compare At:
-
$41.35
- You Save:
-
$6.60
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304517325
Dryer not heating? A failed igniter is the most common cause. This part ignites the gas burner for heat. Watch the video for step-by-step replacement.
Do-It-Yourself Stories from Customers like You
Gas dryer wasn't heating up Tim C. • Algona , WA • February 21, 2015
I looked on Appliance Parts Pros. com and read the problems that others had and replacing the ignitor made sense so I ordered one. It came by UPS within 3 days. I watched the video on how to replace it. Everything went easily, except the screw that held the ignitor in place was a philups head screwdriver and I couldn't get a screwdriver into the small space I had to work in so I went to Harbor Freight Tools and bought an inexpensive 90 degree rachet screwdriver for $2.99 and it worked great....
Read more
More
$153.95
- Compare At:
-
$181.66
- You Save:
-
$27.71
Genuine Lg part
By: Lg
Part Number: AGM30063309
This is the gas valve assembly that controls the flow of gas to the burner in a gas dryer. It includes the solenoid coils and valve body that open and close to regulate gas delivery for heating. Replace this assembly if your gas dryer runs but produces no heat, heats intermittently, or if the gas igniter glows but the gas never ignites.
Do-It-Yourself Stories from Customers like You
Burner would turn off after a few seconds Steve R. • Canyon Country , CA • June 27, 2014
After watching the video, I replaced the gas valve.
Read more
More
$265.36
- Compare At:
-
$315.78
- You Save:
-
$50.42
Genuine Whirlpool part
By: Whirlpool
Part Number: WP33002789
Fix a dryer that won't heat or ignites then cuts out. This igniter assembly lights the gas burner for proper drying. DIY repair takes 30-45 minutes.
Do-It-Yourself Stories from Customers like You
Dryer would not heat Danial K. • Marysville , WA • December 16, 2014
I had cleaned the lint out of the dryer exhaust hose, that was usually the problem. But still no heat.
I went online to AppliancePpartPros and watched the videos and was able to diagnose that I needed a new ignitor. .The parts delivered very quickly and I had the job done in 15 minutes. The repair place I called would have taken days to come out just to look at it at..
Read more
More
$66.78
- Compare At:
-
$80.14
- You Save:
-
$13.36
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303937186
The Ignitor Assembly is an OEM replacement part for Frigidaire dryers. It serves as the ignition source safely firing up burners to initiate drying cycles.
Causes usually relate to the continual thermal shock experienced from heating and then rapidly cooling over extended use. As a foundational safeguard, ignitors require OEM replacement when arcing declines.
Symptoms of a faulty ignitor can include:
- The dryer fails to start or stop heating intermittently
- Cycles taking overly long to complete or feel uneven
- Excessive service calls relating to "no heat" troubles
- Risk of uncombusted gas pooling in dryer if ignition falters
This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.
This part fixes the following symptoms
-
No heat or not enough heat
See more...
Do-It-Yourself Stories from Customers like You
Gas smell in the dryer after a cycle completed no smell outside the dryer (until i opened the door!) Matthew M. • Mcfarland , WI • April 25, 2016
Frigidaire Gallery gas dryer from maybe 15 years ago. Based on the fact the the smell was only in the dryer, I concluded it must be the gas valve failing to completely seal when closed. After looking at the insides again, I suppose it is possible that it was a connection near the burner, but that stuff had remained untouched for 10 years so I still think I made a good assumption. I got a new ignitor as well since I was in there, and compared to the valve, it was cheap! I thought I could get in...
Read more
More
$71.95
- Compare At:
-
$85.62
- You Save:
-
$13.67
Genuine Whirlpool part
By: Whirlpool
Part Number: WP15418
Converting dryer from LP to natural gas? This gas orifice regulates gas flow to the burner for proper heating. DIY-friendly swap, takes 20 minutes.
Do-It-Yourself Stories from Customers like You
I needed to convert from lp to natural gas Mark S. • Raleigh , NC • June 01, 2015
Removed LP Orifice and LP Gas limiter.
Orifice was easy, however the gas limiter was the tricky one because I had no instructions to what went where. I could not find anything online as to how to convert from LP to Natural Gas, but you could find several things as to how to convert from Natural to LP.
I ended up finding the Dryer schematic on line for the Whirlpool Duet natural gas dryer and was able to figure out what sequence the Spring, regulator and limiter went in. The order I just...
Read more
More
$26.95
- Compare At:
-
$32.34
- You Save:
-
$5.39
Genuine Whirlpool part
By: Whirlpool
Part Number: 280119
This complete valve system controls gas flow to your dryer's heating element, regulating flame size and heat output. It opens and closes automatically based on temperature settings and safety requirements. Replace if your dryer won't heat, overheats, or you smell gas during operation.
Do-It-Yourself Stories from Customers like You
Weak or no burner flame Michael T. • North Reading , MA • November 16, 2018
Unfortunately my first repair attempt (replacing the Gas Valve Coils) failed so I decided to replace the entire Burner assembly. From a cost/time point of view the Burner assembly is a better value than just buying the Gas Valve seeing as you don't have to disassemble/reassemble most of the existing Burner (to get to the Gas Valve) *and* you get a new Igniter!! The most annoying thing about the repair is accessing the screw that clamps the gas pipe to loosen it :-(...
Read more
More
$235.95
- Compare At:
-
$280.78
- You Save:
-
$44.83
Genuine Whirlpool part
By: Whirlpool
Part Number: WP693140
If your dryer won't heat or flame won't stay lit, a corroded burner tube may be the cause. This assembly includes an adjustable air shutter for proper combustion.
Do-It-Yourself Stories from Customers like You
Dryer not heating Ray M. • Marissa , IL • October 03, 2014
I removed the kick panel/door and confirmed there was no flame. Inspection with a flashlight revealed the igniter was damage - partly broken away. Using a 1/4" socket set I removed the burner assembly. Inspection showed the burner was rusted and the flame deflector had fallen off. I ordered both the "Dryer Igniter and Bracket" and a burner. They arrived in about three days. I had to attach the igniter to the bracket (one screw) and then the bracket to the burner (one screw). The only...
Read more
More
$87.40
- Compare At:
-
$104.01
- You Save:
-
$16.61
Genuine Frigidaire part
By: Frigidaire
Part Number: PCK4200
Converting your dryer from natural gas to propane? This LP conversion kit includes calibrated orifices for proper fuel flow. DIY-friendly install.
Do-It-Yourself Stories from Customers like You
Converting dryer from natural gas to lp John M. • Townsend , GA • June 29, 2014
Removing cabinet panels to access burner was the major challenge since every one seems to be different. This one, two screws at back allowed top to raise and be removed, Two more screws at front and two cables disconnected removed control panel. The door panel was not quite as obvious, The two screws at top sides and two at very bottom edge were removed. Then by trial, I removed screws around door edge until panel was loose. I removed a couple extra; but the whole door and panel lifted off....
Read more
More
$77.23
- Compare At:
-
$91.90
- You Save:
-
$14.67
Genuine Whirlpool part
By: Whirlpool
Part Number: W10823508
This assembly includes the gas burner and valve components that control the flow and ignition of gas in your dryer. It is responsible for producing the heat needed to dry clothes. Replace this assembly if your dryer is not heating, heats intermittently, or if you notice the gas igniter glowing but the burner failing to light.
Do-It-Yourself Stories from Customers like You
Slow gas leak Roger T. • Houston , TX • October 11, 2016
Valve (or a component on it) was slowly leaking gas. I was able to easily replace the entire gas assembly with this order. Item was mostly pre-assembled, and contained all parts needed, including new igniter and coils.
Read more
More
$181.54
- Compare At:
-
$270.07
- You Save:
-
$88.53
Genuine Ge part
By: Ge
Part Number: WE4M449
If your dryer won't heat or takes too long to dry, a faulty gas igniter is often the cause. This assembly heats up to ignite the burner for proper drying.
Do-It-Yourself Stories from Customers like You
Would not ignite gas burner consistentlyi John M. • O'fallon , MO • October 17, 2016
Installed a new igniter.
Read more
More
$111.95
- Compare At:
-
$132.10
- You Save:
-
$20.15
Genuine Whirlpool part
By: Whirlpool
Part Number: 279923
Dryer won't heat or pilot lights but shuts off? This gas valve assembly controls burner ignition and flame. Typical DIY repair in 45-60 minutes.
Do-It-Yourself Stories from Customers like You
The gas Dryer would not dry clothes because the pilot would ignite but the gas would turn on for a moment then turn off. Eventually the gas would not come on at all. Kenneth S. • Columbus , MI • March 24, 2014
I decided the problem was with the gas valve and I found the part on your web site. I ordered it and received the part in 3 days. I replaced the valve and the dryer works like new! This also gave me an opportunity to vacuum out the dust/lint that collects in and around the dryer.
Read more
More
$158.95
- Compare At:
-
$190.74
- You Save:
-
$31.79