Dryer Insert Control Panel Parts
Genuine Ge part
By: Ge
Part Number: WE4M353
Fix a dryer that won't advance cycles or turn on due to a worn timer shaft. This plastic-shaft timer restores knob grip and timing control. 10-minute DIY fix.
Do-It-Yourself Stories from Customers like You
Several parts timer belt doors with and element William F. • Gainesville , FL • August 09, 2015
Checked for the problem replaces that part along with some parts as preventive maint app made it easy parts for perfect and were shipped very fast app is the only place to buy parts great place
Read more
More
$129.47
- Compare At:
-
$154.07
- You Save:
-
$24.60
Genuine Ge part
By: Ge
Part Number: WE19M1486
This replacement control panel, also called the backsplash assembly, is the structural console on the rear of the dryer top where the timer and switches mount. It restores secure control mounting and a clean, finished appearance when the original is cracked or damaged.
- Houses and supports the dryer's timer and control switches
- Covers and helps protect console-area wiring from contact
- Aligns control shafts through the panel openings for smooth knob operation
- Common signs of failure: cracked panel, broken mounting tabs, loose or rattling controls
What's included: 1 control panel Install notes:
- Disconnect power; for gas models, also shut off the gas supply
- Remove control knobs and mounting screws, then tilt or lift the console to access the panel
- Transfer timer/switches and any brackets from the old panel to the new one, keeping hardware organized
- Do not overtighten screws; verify all controls turn and click freely before restoring power
Do-It-Yourself Stories from Customers like You
Plastic console capture tabs and switch tabs broke plastic switch split Nelson T. • Mobile , AL • April 26, 2016
Unplugged the dryer. Disconnected the exhaust hose w/ 5/16" nut driver. Removed all knobs. Removed 3 Phillips head screws behind the console. Removed all switches and controls by lifting locking tabs and turning counter clockwise. Installed switches and controls into new console by inserting into hole(s) and turning clockwise until locking tab engaged. Positioned console capture tabs back in their slots and snapped console back in place with the back plate. Re installed the tree screws. Re...
Read more
More
$140.95
- Compare At:
-
$167.73
- You Save:
-
$26.78
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3976577
Dryer won't shut off or advance through cycles? This timer restores proper cycle switching and automatic shut-off. Moderate DIY repair, 30-45 minutes.
Do-It-Yourself Stories from Customers like You
Timer on dryer was malfunctioning dryer would not automatically turn off Patrick T. • Saugerties , NY • January 02, 2015
Replaced timer.
Read more
More
$178.95
- Compare At:
-
$211.16
- You Save:
-
$32.21
Genuine Whirlpool part
By: Whirlpool
Part Number: W11126319
This coin chute guides coins from the slide into the coin mechanism so the machine can register payment and begin a cycle. Keeping the chute intact and aligned helps prevent jams and misfeeds in coin-operated laundry equipment.
- Directs coins from the slide to the coin mechanism to register payment
- Helps ensure smooth coin drop, reducing bounce-back and misfeeds
- Common fix when coins jam, fall into the cabinet, or the unit won't start after payment
- Replace if cracked, bent, corroded, or missing
Install notes:
- Disconnect power; shut off gas before service
- Open the coin housing/slide assembly and retain existing hardware
- Install the new chute in the same orientation; align with slide and mechanism, then secure
- Test with sample coins to ensure proper drop and operation before returning to service
Do-It-Yourself Stories from Customers like You
The door latch was bad the control board and coin control board Christopher E. • Lansing , IL • May 18, 2016
A new set of control board, coin control board and the door latch was installed, and the washing machine was reprogrammed.
Read more
More
$178.95
- Compare At:
-
$214.74
- You Save:
-
$35.79
Genuine Ge part
By: Ge
Part Number: WE19M1492
Replaces cracked or broken dryer control console back cover. Forms rear housing that supports timer, controls, and shields wiring. Easy DIY fix.
Do-It-Yourself Stories from Customers like You
The started switch fell back into the back assembly faceplate i took it apart with just three screws to loosen and the problem was obvious the plastic tabs that held the switch had sheared off from George B. • North Port , FL • October 30, 2017
Ordered the faceplate and just for insurance a new switch and know. The installation required a phillips screwdriver, a needle nose pliers, and about 10 minutes of time. Thanks to AppliancePartsPros for getting me the right parts asap...........George
Read more
More
$203.76
- Compare At:
-
$242.47
- You Save:
-
$38.71
Genuine Frigidaire part
By: Frigidaire
Part Number: 131062300
If your dryer won't shut off or cycles won't advance, the timer may have failed. This control manages drying cycles and run time. DIY repair in 20 minutes.
This part fixes the following symptoms
-
Doesn't shut off
-
Timer will not advance
See more...
Do-It-Yourself Stories from Customers like You
The timer had stopped advancing William S. • Arlington , TX • April 03, 2017
With a Phillips screw driver, on the back of the control panel there was about 6 or 7 screws to undo, to take the cover off and 2 screws holding the timer in place. Just undone those, took out old timer, made sure I took wires from old timer one at a time, and, put on new timer. Put everything back, although I had to find a couple of very small washers to make the timer fit tight, in the 2 holes it came out of. Luckily I had those or would of been a very loose timer. Very easy to do.
Read more
More
$206.50
- Compare At:
-
$243.67
- You Save:
-
$37.17
Genuine Ge part
By: Ge
Part Number: WE4M359
This timer controls the duration of each drying cycle by advancing through timed and automatic dry settings and signaling the dryer to stop when the cycle is complete. It mounts behind the control panel and connects to the timer knob on the front of the dryer. Replace this timer if the dryer won't start, won't advance through cycles, runs continuously without stopping, or the timer knob turns but nothing happens.
More
$80.95
- Compare At:
-
$97.14
- You Save:
-
$16.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8299771
This is a 60 Hz timer that controls the duration of drying cycles in a clothes dryer. It advances through each stage of the cycle and signals the motor and heating components to turn on or off at the appropriate times. Replace this timer if the dryer will not start, the cycle does not advance, the timer knob spins freely without clicking, or if the dryer runs continuously without shutting off.
Do-It-Yourself Stories from Customers like You
The imer was acting erratic Raymond C. • Irving , TX • December 21, 2014
I replaced the timer with a new one.
Read more
More
$170.77
- Compare At:
-
$201.51
- You Save:
-
$30.74
Genuine Frigidaire part
By: Frigidaire
Part Number: 137070870
Dryer won't start, won't advance cycles, or displays PAU error? This electronic control board manages timing and functions. Moderate DIY repair.
Do-It-Yourself Stories from Customers like You
Dryer wouldn't shut itself off Joshua S. • Hanceville , AL • March 05, 2016
I replaced the control panel with a new one.
Read more
More
$170.46
- Compare At:
-
$212.88
- You Save:
-
$42.42
Genuine Ge part
By: Ge
Part Number: WE4M513
This genuine replacement part is a user interface board for dryers. The user interface board is the circuit board that responds to the buttons located on the control panel allowing the user to adjust the dryer settings. If the dryer is no longer responding when buttons are being pressed then it might be time to replace the user interface board. Luckily this is a relatively easy repair.To replace the interface board begin by turning off the power to the dryer. Once the power has been shut off move the dryer away from the wall to gain access to the upper back panel. Remove the panel and locate the interface board. Snap it out of its brackets and remove the wire harness attached to the board. Reinsert the wire connector to the new interface and snap the new board assembly back to its original place.This OEM replacement part is sold individually and is compatible with General Electric, Hotpoint, and RCA brand Dryers.
Do-It-Yourself Stories from Customers like You
The user interface board has a little button for the power and it fell off needless to say i had to replace the whole board for just that button poor design on ge's part Charles P. • Blaine , WA • November 11, 2016
Replacing the board took about two minutes from start to finish after removing the select knob. Extremely easy but costly.
Read more
More
$292.95
- Compare At:
-
$348.61
- You Save:
-
$55.66
Genuine Frigidaire part
By: Frigidaire
Part Number: 134321702
This is the lower access panel, also called a toe panel, that attaches to the front bottom of the washer. It covers the internal components beneath the drum area and provides a finished appearance. Replace this panel if it is dented, cracked, rusted, or if the mounting tabs are broken, leaving the lower portion of the machine exposed.
Do-It-Yourself Stories from Customers like You
The front panel was broke due to pulling on it and not sliding the handle the front clamp rusted in two the bottom panel was rusted and the door boot seal looked terrible Daren R. • Garden City , GA • January 19, 2015
Watched the video a few times for door boot seal replacement. It was a lot of help! The spring is the hardest to replace and I did enlist the help of my wife. Everything went back on great. If you have to replace the front panel (with the buttons) be mindful that the buttons are spring loaded and will come out. I did not lose any and it went back together just fine. A little touch up paint on the washer and it all looks brand new and works great. And the parts came in quicker than...
Read more
More
$97.49
- Compare At:
-
$116.99
- You Save:
-
$19.50
Genuine Frigidaire part
By: Frigidaire
Part Number: 137237100
Fixes dryers with intermittent timing issues, unresponsive controls, or cycles that won't start. This electronic control board restores proper operation.
Do-It-Yourself Stories from Customers like You
Don’t remember the code! was one about the exhausting of the unit Alex O. • Tomahawk , WI • October 19, 2019
Needed new squirrel cage installed. It wasn’t hard to do at all! Cleaned the unit up like it was brand new and runs great!
Read more
More
$206.95
- Compare At:
-
$244.20
- You Save:
-
$37.25
Genuine Frigidaire part
By: Frigidaire
Part Number: 809160308
This is the main electronic control board that manages the dryer's operating functions, including cycle selection, temperature regulation, and timing. It receives input from the user interface and sensors, then directs power to the motor, heater, and other components accordingly. Replace this board if the dryer won't start, displays error codes, stops mid-cycle, or if buttons and cycle selections are unresponsive.
Do-It-Yourself Stories from Customers like You
No power to the control unit John C. • Oakwood , VA • June 03, 2017
Changed the control board.
Read more
More
$250.95
- Compare At:
-
$301.14
- You Save:
-
$50.19
Genuine Frigidaire part
By: Frigidaire
Part Number: 131960800
Dryer won't turn off or advance cycles? This control timer regulates cycle progression and automatic shutoff. Moderate DIY repair restores timing.
Do-It-Yourself Stories from Customers like You
The dryer would not turn off. Garrett S. • Girdwood , AK • September 19, 2022
Replaced timer.
Read more
More
$182.29
- Compare At:
-
$216.93
- You Save:
-
$34.64
Genuine Whirlpool part
By: Whirlpool
Part Number: 33002536
Control panel assembly with touchpad for your dryer. Mounts on top of the unit. Replace if buttons are unresponsive, cracked, or display is damaged.
Do-It-Yourself Stories from Customers like You
Dryer would not function could not enter diagnostic mode Scott P. • Tipton , IA • June 27, 2014
Initially displayed "30", would not change and no response from control panel button inputs. At one point, the display changed to "12" after a power off and the dryer did function again for a short period of time. It's now working good with a new control panel.
Read more
More
$397.61
- Compare At:
-
$469.18
- You Save:
-
$71.57
Genuine Ge part
By: Ge
Part Number: WE49X23896
Dryer won't advance through cycles or stops mid-cycle? This timer and wiring harness kit restores accurate cycle control. Moderate DIY repair.
More
$165.55
- Compare At:
-
$197.00
- You Save:
-
$31.45