Dryer Push Button Start Switch Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 131965300
Replace your dryer's control panel knob if it's cracked, broken, or missing. This knob installs on the control panel for cycle and setting selection.
Do-It-Yourself Stories from Customers like You
The on knob broke Mary B. • Dennisport , MA • September 26, 2014
Ordered the part, received it in a couple of days and whammo, everything is fine. So easy.
Read more
More
$24.95
- Compare At:
-
$29.44
- You Save:
-
$4.49
Genuine Whirlpool part
By: Whirlpool
Part Number: W10335056
Washer not filling properly or overfilling? A faulty water level pressure switch fails to signal correct fill levels. DIY repair in about 1 hour.
This part fixes the following symptoms
-
Will not stop filling with water
-
Will not fill with water
See more...
Do-It-Yourself Stories from Customers like You
Washing machine wouldn't fill water to the correct level it filled as if it were set to "small load" every time Jessica A. • Baltimore , MD • April 13, 2014
I took the washer apart and replaced the water level switch and hose with new ones. I followed the video that I found on youtube (which is on the site) and had no problems at all.
Read more
More
$62.46
- Compare At:
-
$74.95
- You Save:
-
$12.49
Genuine Frigidaire part
By: Frigidaire
Part Number: 134886700
The Timer Knob Assembly is an OEM replacement part for Frigidaire electric dryers. This assembly incorporates the timer dial, stem, and mounting components that allow users to set desired drying periods.
Causes of a faulty timer knob include wear and tear of internal gears from regular cycle selections. Damage to the outer dial or stem connection points may also occur.
Symptoms include:
- Inability to rotate timer dial through full drying options
- Timer selections not initiating or maintaining set programs
- Dial detaching from the front panel during adjustment
This OEM Frigidaire replacement part is compatible with Electrolux, Gibson, and various Kenmore dryer models as well.
Do-It-Yourself Stories from Customers like You
Dryer timer would not turn and knob broke from the strain Bruce B. • Birmingham , AL • October 17, 2014
I ordered the timer and knob on Monday, they arrived around noon on Tuesday, and within an hour I had them installed and back in business. I was amazed how quickly the parts got here. The online video showing the procedure step by step was very helpful. Instead of disconnecting all the wires and having to keep up with which one went where, I moved each wire one by one and made sure I didn't get any of them in the wrong place. The only thing that slowed me down a bit was seeing which side of the...
Read more
More
$51.62
- Compare At:
-
$61.94
- You Save:
-
$10.32
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22001664
The Timer Knob Insert is an OEM replacement part for Whirlpool dryers. This is a cap located on the timer knob on the control panel. Color: White. This is the timer knob cap only. For the complete assembly, you must also order the knob and skirt.
Causes of timer knob Insert failure can include cracked plastic from years of repeated turning motions. Wear on components also occurs due to extensive lifetime usage cycles.
Symptoms of a faulty timer knob insert include:
- Knob becomes loose, detached or inoperable for timings scrolling
- Cracks appear exposing internal timer parts
This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Broken knob James G. • Decatur , IL • November 16, 2014
It's working now
Read more
More
$9.63
- Compare At:
-
$11.36
- You Save:
-
$1.73
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8181859
The Washer Control Knob is an OEM replacement part for Whirlpool washers.
Causes of malfunctions include stripped interior gears losing secure connection to circuit boards over hundreds of wash cycles. Repeated twisting motions can also crack fragile exterior ring structures.
Symptoms consist of:
- Refusal to rotate between settings
- Missing or faded graphics impairing readability
- Inability to start or stop washer cycles as needed
This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.
Color: Light gray used on platinum models. Measures about 1-2/3 inches in diameter. For blue order WP8181881. For dark gray used on pewter models order WP8182050.
Do-It-Yourself Stories from Customers like You
Stuck/broken start button Oladiran O. • Austin , TX • July 11, 2015
Googled it. Saw the YouTube video on replacing the User Interface module. Decided to try to fix this myself. Looked simple enough. Ordered the UI module. Saw the video on the replacement again.
Read more
More
$50.57
- Compare At:
-
$60.18
- You Save:
-
$9.61
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8283288
Comes with jumper wire.
Do-It-Yourself Stories from Customers like You
Drier would not start when i set it to diagnostics code said 6e all display lights turned on Randal B. • Salt Lake City , UT • December 21, 2014
Searched internet for answers. Decided to replace the door switch. Drier now runs great!
Read more
More
$83.95
- Compare At:
-
$99.06
- You Save:
-
$15.11
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3406102
Dryer won't start or runs with door open? The door switch is often the culprit. This safety switch ensures operation only when closed. DIY-friendly, takes 15-30 minutes with basic tools.
Do-It-Yourself Stories from Customers like You
Door switch on dryer was not working dryer would continue to run when the door was opened Jeff W. • Knoxville , IA • September 04, 2015
Simple unplug, unscrew and replace.
Read more
More
$34.75
- Compare At:
-
$41.35
- You Save:
-
$6.60
Genuine Ge part
By: Ge
Part Number: WE01X22616
The Knob Control Assembly is an OEM part for GE dryers. It enables users to select the desired settings and cycles by turning the knob to the appropriate position on the control panel.
Causes of a bad knob control assembly can include frequent use leading to wear and tear, accidental impacts that cause cracking or breaking, or internal mechanisms becoming stripped or damaged. Additionally, exposure to moisture or excessive force can also contribute to its failure.
Symptoms of a bad knob control assembly include:
- Difficulty in turning the knob
- Knob slipping or not staying in place
- Inability to select or change cycles
- Cracks or visible damage to the knob
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Plastic shaft on dryer timer rounded required replacement to function Norbert G. • Hempstead , NY • July 14, 2025
Easy fix, first I unplugged the dryer. Then removed the 6 Philips head screws on head unit back panel. Photographed wiring on timer. Removed the 1 torx screw holding the timer assy in place, the front panel knob was already off, would no longer stay on. Removed the wires from the timer assy, removed the timer, replaced it with new one, reinstalled torx screw. Reattached the wires to the positions removed from. Pressed the new knob on the shaft at front panel, tested it functioned and in the...
Read more
More
$14.95
- Compare At:
-
$17.94
- You Save:
-
$2.99
Genuine Whirlpool part
By: Whirlpool
Part Number: 279782
Dryer won't start but has power and timer works? This belt switch kit stops the dryer when the belt breaks. Moderate DIY repair, 45-60 minutes.
Do-It-Yourself Stories from Customers like You
Broken belt switch Jack F. • Hermosa Beach , CA • July 08, 2016
Every time I tried to start our dryer, the "Sensing Light" came on, I heard a little "click," and the dryer would not start.
According to the very helpful Appliance Parts Pros. videos, I was able to dismantle, diagnose a few components, and discover the broken part. In this case, it was a Broken Belt Switch.
I ordered the part, we went on vacation for a week, and when we returned home the part was at our residence. The next day, I installed the part and all is good now.
I am nearly 70 years...
Read more
More
$54.25
- Compare At:
-
$64.56
- You Save:
-
$10.31
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10350906
Dryer won't start or stops mid-cycle? A faulty door switch prevents operation when the door position isn't detected. Moderate DIY repair, 30-45 minutes.
More
$55.30
- Compare At:
-
$66.36
- You Save:
-
$11.06
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10251394
This is a control knob used on a dryer to select cycle settings or timer functions. It fits onto the control panel shaft and allows you to turn and select the desired drying cycle. Replace this knob if it is cracked, broken, or no longer grips the shaft properly, making it difficult to start or change dryer cycles.
Do-It-Yourself Stories from Customers like You
Broken dryer knob Gloria D. • Destin , FL • October 05, 2024
Ordered a new one
Read more
More
$52.68
- Compare At:
-
$62.69
- You Save:
-
$10.01
Genuine Frigidaire part
By: Frigidaire
Part Number: 134813663
Dryer won't start or stops mid-cycle? This door switch detects when the door is closed, allowing your dryer to run. Simple DIY fix in 15-30 minutes.
More
$52.68
- Compare At:
-
$62.16
- You Save:
-
$9.48
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10424308
The Push Button is an OEM part for Whirlpool Laundry Centers. This part starts the wash or dry process, and making adjustments to settings. The push button is engineered for durability and a precise fit, ensuring it integrates seamlessly with the appliance's control panel.
Causes of a malfunctioning push button can include repeated use leading to wear and tear, accumulation of lint or detergent residue affecting its functionality, or damage to the button's contacts or the control panel circuitry.
Symptoms of a bad Push Button include:
- Difficulty in engaging the desired cycle or setting
- The button feeling stuck or failing to return to its original position after being pressed
- The appliance not responding to button presses, resulting in an inability to start or modify cycles
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Sticking buttons on dryers George M. • Portland , ME • October 25, 2016
Took less than half an hour to complete repair. Saved $100 service call!!
Read more
More
$16.95
- Compare At:
-
$20.17
- You Save:
-
$3.22
Genuine Frigidaire part
By: Frigidaire
Part Number: 134042800
Color: white. This knob measures about 1-1/2 inches in diameter.
Do-It-Yourself Stories from Customers like You
Rotary knob cracked at base Mark W. • Delray Beach , FL • July 28, 2015
Ordered new one from Appliance Parts Pros. Installed new one.
Read more
More
$51.62
- Compare At:
-
$61.43
- You Save:
-
$9.81
Genuine Speed Queen part
By: Speed Queen
Part Number: D513505
This 3-position fabric selector switch is the control behind the knob that lets you choose the fabric setting on your unit. Replacing a worn switch restores positive detents and ensures your selection is recognized instead of ignored or stuck.
- Provides three selectable fabric settings to tailor operation
- Routes the chosen setting to the timer/control
- Typical symptoms: no response when changing settings, intermittent selection, or being stuck on one mode
- Physical clues of failure: loose/no detent feel, broken shaft, or heat-discolored terminals
What's included: One 3-position fabric selector switch Installation notes:
- Disconnect power before servicing
- Access the control console; remove the knob and retaining hardware to free the old switch
- Photograph/label wire positions and transfer each lead to the same terminals on the new switch
- Reassemble and test all three positions for proper engagement
Do-It-Yourself Stories from Customers like You
Dryer not heating Sandy H. • Burkesville , KY • January 14, 2017
Replaced the fabric selector switch. Took abut fifteen minutes. Dryer works fine.
Read more
More
$35.95
- Compare At:
-
$42.78
- You Save:
-
$6.83
Genuine Whirlpool part
By: Whirlpool
Part Number: W10847984
Dryer won't start or tumble? This belt switch monitors drive belt tension and cuts power if the belt breaks or slips. Moderate DIY repair with video.
Do-It-Yourself Stories from Customers like You
Loud noise and squealing from bottom of Cabrio dryer. Mark B. • Goodyear , AZ • November 24, 2018
Remove bottom panel, remove top panel, remove drum. Had to cut old squirrel cage off. Remove motor to remove old wheel shank. Remove belt switch, and replaced. Videos from AppliancePartPros helped a lot..
Read more
More
$27.37
- Compare At:
-
$32.57
- You Save:
-
$5.20