Microwave Cover Vent Parts
Genuine Lg part
By: Lg
Part Number: 4810W1A151A
Holds the damper assembly in place inside the microwave cavity above the wave stirrer. Replace if bracket is bent, broken, or missing during installation.
Do-It-Yourself Stories from Customers like You
Incorrect parts given to me upon purchase of appliance Marnie S. • Kennewick , WA • March 08, 2018
Needed installation parts. I ordered the parts from the company I purchased the appliances from. A week went by and no parts, called, emailed and called again to find out when the parts would arrive to be able to Re-schedule the installation. After the run around, I found AppliancePartsPros website and placed my order with them. I received the parts I needed within the time they promised. I was able to schedule my installation to enjoy my new appliance. It's been almost 4 weeks and still no...
Read more
More
$16.95
- Compare At:
-
$20.34
- You Save:
-
$3.39
Genuine Lg part
By: Lg
Part Number: 4900W1A001B
Exhaust damper for microwave venting systems. Installs on rear exhaust to regulate airflow. Replace if cracked, broken, missing, or not sealing properly.
Do-It-Yourself Stories from Customers like You
Incorrect parts given to me upon purchase of appliance Marnie S. • Kennewick , WA • March 08, 2018
Needed installation parts. I ordered the parts from the company I purchased the appliances from. A week went by and no parts, called, emailed and called again to find out when the parts would arrive to be able to Re-schedule the installation. After the run around, I found AppliancePartsPros website and placed my order with them. I received the parts I needed within the time they promised. I was able to schedule my installation to enjoy my new appliance. It's been almost 4 weeks and still no...
Read more
More
$13.95
- Compare At:
-
$16.46
- You Save:
-
$2.51
Genuine Whirlpool part
By: Whirlpool
Part Number: W10843943
Air damper assembly for over-the-range microwaves. Installs at top exhaust opening to control airflow direction. Replace if cracked, missing, or broken.
Do-It-Yourself Stories from Customers like You
Microwave vented into kitchen Henry T. • Brighton , CO • April 21, 2014
Bought a new home with microwave venting into kitchen. Ordered damper assembly needed to vent through the wall to the outside. Removed microwave, followed directions in original installation instructions, turned fan over, cut hole in wall, installed wall cap and replaced oven. Problem solved.
Read more
More
$60.52
- Compare At:
-
$72.02
- You Save:
-
$11.50
Genuine Ge part
By: Ge
Part Number: WB36X10071
Replacement glass lens cover for microwave interior or cooktop lights. Protects bulb from food splatters. Needed when cracked, broken, or shattered.
Do-It-Yourself Stories from Customers like You
My glass light lens for the surface lights was broken Randel A. • Clearfield , UT • June 10, 2014
I ordered the replacement lens from AppliancePartsPros.com. They shipped it quickly and when the part cam in I just swapped it out for the broken lens.
Read more
More
$22.50
- Compare At:
-
$27.00
- You Save:
-
$4.50
Genuine Ge part
By: Ge
Part Number: WB06X10638
This is a thin mica sheet that covers the waveguide opening inside the microwave cooking cavity. It protects the magnetron and waveguide from food splatter and moisture while allowing microwave energy to pass through into the cooking area. Replace it if the cover is scorched, cracked, or has burn marks, which can cause sparking or arcing during operation.
Do-It-Yourself Stories from Customers like You
Scb1001mss001 is dead nothing displayed Jiamin Z. • Allen , TX • June 12, 2017
Fuses are all OK, but the primary of low voltage transformer was disconnected. Replaced with new one, everything works good.
Read more
More
$21.95
- Compare At:
-
$26.12
- You Save:
-
$4.17
Genuine Ge part
By: Ge
Part Number: WB06X10712
Replaces a cracked, melted, or burned microwave stirrer fan cover. Installs on top of the cavity to protect the stirrer mechanism from damage.
Do-It-Yourself Stories from Customers like You
Had a hole burned in plastic cover Matthew P. • Rockford , MI • February 01, 2015
Used a flat head screwdriver to pop off old cover. Put new one back on. Keep the little plastic screw as the new cover does not come with one.
Read more
More
$26.95
- Compare At:
-
$31.80
- You Save:
-
$4.85
Genuine Ge part
By: Ge
Part Number: WB06X10686
Replaces a cracked, bent, or missing microwave exhaust damper flap. Installs on top of the unit to direct airflow and prevent drafts when not venting.
More
$15.68
- Compare At:
-
$18.50
- You Save:
-
$2.82
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304509435
Replaces cracked, burned, or missing waveguide cover in your microwave. Protects the magnetron opening from food splatter and moisture damage.
Do-It-Yourself Stories from Customers like You
Broken waveguide cover Urdley S. • Staten Island , NY • July 04, 2014
Ordered the part and popped it back in. Shipping was extremely fast.
Read more
More
$23.95
- Compare At:
-
$28.26
- You Save:
-
$4.31
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304509486
This is a vent damper door used in the microwave's exhaust system. It opens to allow steam and cooking fumes to vent outside and closes to prevent outside air from flowing back in. Replace this part if the damper is stuck open or closed, if you hear rattling from the vent area, or if you notice poor ventilation or backdrafts during cooking.
Do-It-Yourself Stories from Customers like You
Re routing microwave exhaust Karissa B. • Brookhaven , GA • October 19, 2015
We bought a house with an over-the-range microwave, which just recirculated air into our house--not effective for smoky meals! We removed the microwave and cut a hole to send the exhaust out the back of the microwave (and out of our house), but realized we were missing this damper and frame that go on the back of the microwave for rear exhaust. The parts fit perfectly and now we can enjoy a smoke-free kitchen!
Read more
More
$43.95
- Compare At:
-
$52.30
- You Save:
-
$8.35
Genuine Ge part
By: Ge
Part Number: WB06X10436
Controls exhaust airflow in over-the-range microwaves. Replaces bent, damaged, or missing damper assemblies for proper external venting installation.
Do-It-Yourself Stories from Customers like You
Convert microwave from recycling vent to an external vent system Gaspar D. • Summerfield , NC • December 31, 2015
We followed the manufacturer's instructions about re-positioning the fan motor and installing the vent damper (easy). We constructed a duct system from the microwave to the outside of the house (challenging). We used 3.25" x 10" metal duct to start the system through the wall behind the microwave, where we added framing to reinforce a cut stud. We ran the duct up a closet wall and through its ceiling into the attic. We had to make an offset duct piece from 3.25" x 10" metal duct to clear a...
Read more
More
$38.95
- Compare At:
-
$46.35
- You Save:
-
$7.40
Genuine Ge part
By: Ge
Part Number: WB06X10565
Controls airflow in your microwave's venting system. Installs in the duct assembly to regulate steam and moisture release. Replace if cracked or missing.
Do-It-Yourself Stories from Customers like You
I recently changed our above the range microwave to vent outside but when there are strong winds against the outlet cool air came in this is an extra block against air intrusion James D. • Downingtown , PA • October 31, 2015
This damper was added to the outside vent duct line as an additional block against outside air intrusion. Under spousal orders I had just changed the microwave vent to the outside (the proper way to go, but much more difficult to accomplish) but then there was some "flowback" when the wind was pressing against the back of the house (westward facing), and I was ordered to reduce this flow before the winter arrived in full force. There is this same damper on the microwave unit itself, but I...
Read more
More
$18.77
- Compare At:
-
$22.34
- You Save:
-
$3.57
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304462314
Protects the magnetron antenna opening inside your microwave cavity. Replace if cracked, burned, or has food buildup to prevent arcing and sparking.
Do-It-Yourself Stories from Customers like You
The original cover was compromised and dented which caused arcing and sparks William R. • Aliso Viejo , CA • January 16, 2016
Replaced with new cover from appliancepartspros.com, and it works like new. Easy to install with no tools required.
Read more
More
$55.95
- Compare At:
-
$67.14
- You Save:
-
$11.19
Genuine Ge part
By: Ge
Part Number: WB36X10129
The Microwave Oven Light Lens Cover is an OEM replacement part for GE microwaves. It serves as the protective glass shielding the internal light fixture. Reliable lens safety and clarity are pivotal to effortless visibility within microwave cavities.
Causes of a damaged light lens cover can include cracks or breaks from impact accidents during cleaning, warping from excessive heat exposure over time, or scratches obscuring transparency.
Symptoms of a compromised lens cover include:
- Cloudiness or opacity inhibiting light diffusion
- Exposure of live electrical wiring beneath broken glass
- Gaps permitting liquid/debris ingress into delicate internals
- Inability to accurately monitor microwaved items cooking
This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Glass cracked Julie W. • Lee's Summit , MO • March 24, 2014
Husband removed old glass and bought the bit to unscrew the bracket and replaced glass; saved $30 on part and $80 on service call
Read more
More
$129.95
- Compare At:
-
$154.64
- You Save:
-
$24.69
Genuine Ge part
By: Ge
Part Number: WB36X10216
Clear glass lens cover for over-the-range microwave cooktop light. Shields bulb from grease and splatters. Replace if cracked, broken, or missing.
Do-It-Yourself Stories from Customers like You
It was missing the glass & holder for the light over the stove Esther M. • Phoenix , AZ • September 05, 2015
We ordered the parts we needed & they came right away. My husband installed them the day they came. Voila! Perfect!
Read more
More
$22.95
- Compare At:
-
$27.54
- You Save:
-
$4.59
Genuine Samsung part
By: Samsung
Part Number: DE67-40063A
Glass cover that protects the cooktop light bulb on your over-the-range microwave. Replace if cracked, broken, or missing to restore appearance.
Do-It-Yourself Stories from Customers like You
Broken glass and burned out light bulb Robert C. • Milan , IN • October 19, 2015
Screwdriver
Read more
More
$26.95
- Compare At:
-
$31.80
- You Save:
-
$4.85
Genuine Ge part
By: Ge
Part Number: WB06X10764
This molded resin cover is a protective plastic shield used inside the microwave. It helps protect internal components and ducting from splatter and debris and restores a secure, finished fit when the original cover is cracked or missing. What it does:
- Shields internal components from grease, steam, and food splatter inside the unit
- Helps maintain proper airflow paths and a snug, rattle-free fit
- Common replacement when the original cover is cracked, warped, loose, or missing
- Visual cue: exposed internal parts or a cover that won't stay secured
What's included:
- One resin (plastic) cover
Install notes:
- Disconnect power (unplug or switch off the breaker) and allow the unit to cool
- Access the cover location; remove retaining screws/clips and keep hardware for reuse
- Align the new cover and secure it without overtightening
- Ensure the cover is fully seated and not contacting nearby moving parts before restoring power
Do-It-Yourself Stories from Customers like You
Microwave arcing Peggy S. • Jefferson City , MO • December 21, 2014
After researching on the internet, I decided replacing the wave guide cover would be much cheaper than replacing the microwave. Plus I couldn't even find one that worked with the existing trim kit. Had a bit of difficulty removing the old cover, but the folks at Appliance Parts Pro answered my email question within 24 hours. I received the replacement part a day or so later. GREAT CUSTOMER SERVICE! Thanks!
Read more
More
$13.40
- Compare At:
-
$13.72
- You Save:
-
$0.32