Microwave Leak Blower Rewind Spring Parts

It was a really simple fix, and I kick myself for waiting so long to attempt the repair. Following the YouTube video, I had the old motor out and the new one in in approximately 10 minutes. I even felt the satisfaction of having completed a repair project. Read more

• Noisy
• Tray won't turn

I fix this problem by purchasing a new turntable motor. Simple 5 minute installation. Read more

• Door stuck closed

I called Samsung Customer Support and was told I'd need to enter a service ticket since this repair was not something an owner could fix. Then I checked on line and found the parts on AppliancepartsPros.com and read the reviews from other owners about how simple this repair was. I ordered the parts, they were delivered within 2 days. The repair could not have been easier. I used a table knife to remove the plastic inner door, replaced the broken latch, snapped the plastic inner door back in... Read more

Checked switch with a voltmeter, determined the switch was bad. Ordered a new switch....watched a short how to you-tube video.....and from there.....it was fixed. Read more

• Noisy
• Tray won't turn

Removed 8 screws from bottom panel on microwave. Pulled two prong plug off old motor. Read supplied voltage off motor decal and tested for it. Deemed motor to be bad and changed it. Works great. After tearing old motor apart it seems a liquid got in there from inside microwave. No seal on motor. Bad design flaw in my opinion. Read more

Obtained the replacement motor and tray coupler from Appliance Parts Pro. Video of the typical replacement was very helpful to show what to expect and how to replace the motor and coupler. The removal of the bottom plate was held in place by several phillips screws. The motor was attached with two torx screws. The electric connection clips to the motor required needle nose pliers to pull them off. The tray coupler was simple to install after the motor was secured and bottom plate was replaced.. Read more

• Tray won't turn

When our turntable stopped rotating, I would hear a clicking sound each time I used our microwave, like something was not properly engaging in order to turn the glass tray. Even though our microwave was 10 years old, everything else worked fine. I did a little research on the internet and found a couple YouTube videos that showed replacing the small motor in the bottom of GE microwaves. I am not a mechanical person, but it looked fairly easy, so I decided to try it. The... Read more

• Tray won't turn

Unplug your microwave. Took the screws off of the bottom of the unit with it still on the cabinet. The whole bottom panel swung down to expose the turntable motor. I took the power cable loose (just pull it off). It was one screw to take the motor out. Word to the wise: DON'T try to take the plastic coupler off before the motor. Their is a tab that holds it in while the motor is in place. If you pry it up you will break it, trust me. ;) Turn the motor out of its housing and it come right out.... Read more

I ordered the replacement motor. I unplugged the microwave. Then I simply removed the turntable spindle by lifting it up off the motor from inside the microwave. Next, I removed the 7 screws holing the bottom of the microwave in place. I lowered the bottom of the microwave, giving me access to the motor. I unplugged the two wires connected to the motor, removed the 2 screws holding the motor in place, then put the new motor in place and reversed the steps to complete the job. Read more

I replaced the motor by removing 5 screws from the bottom of the microwave and 1 screws from the motor. Very easy to replace, I didn't even have to remove it from the wall (I unplugged it just in case). Read more

Ordered the turntable motor. Removed the bottom panel of the microwave to gain access, removed the old motor and replaced it with the new one. Easy peasy! Read more

Looked online and found that someone had experienced the same issue and had replaced the cooling fan assembly for the magnetron. I ordered the parts for the assembly (motor, fan, and support), and replaced them and this fixed the problem. It took about 10 minutes to replace the parts, but lowering the unit and disassembly took around 45 minutes. The most difficult part was getting the outer sheet metal cover back on after the repair, as it has a bunch of clips on each front edge that need to... Read more

I removed the 7 screws on the bottom of the microwave that held the bottom sheet metal piece. The piece dropped down , exposing the turntable motor. I ordered the parts I needed, the motor and the coupler (which had broken), and when they arrived the next day, I removed the 2 screws which held the motor in place and installed the new motor. I replaced the sheet metal piece and the 7 screw, and then put the coupler in the microwave, pushing it onto the motor. I replaced the glass turntable. ... Read more

I replaced 3 parts and its like brand new. Read more

• Tray won't turn

I googled the make and model, and found the part on AppliancePartsPros.com. The underside of the oven has a metal grille with numerous openings of various shapes and sizes. There is a rectangle that is punched into this grille, just below the motor. I pried between the vent holes to snap the connections near the perimeter on the punched rectangle. I only did this on three sides. Then pry up the rectangle away from the connected side. Undid the hold down screw, separated the motor from the... Read more

With parts from you my son repaired the door and now microwave is operating perfect.,.... A 10 minute job for him!... Thanks for not having to buy a new one!!!!! Read more