Microwave Spring Parts

The Microwave Key Spring is an essential component for maintaining the functionality of your Samsung microwave. This high-quality spring-key ensures that the microwave door operates smoothly and securely, providing reliable performance every time you use your appliance. Crafted as a genuine OEM part, it guarantees compatibility with a wide range of Samsung microwave models, ensuring a perfect fit and seamless integration. Installing the Microwave Key Spring is straightforward, allowing you to restore your microwaveGÇÖs performance without any hassle. By replacing a worn or damaged spring-key with this genuine OEM part, you can enhance the durability and longevity of your microwave. This key spring plays a crucial role in the door mechanism, helping to maintain the proper alignment and ensuring that your microwave closes firmly. Choose the Microwave Key Spring to keep your Samsung microwave functioning efficiently and to enjoy a reliable cooking experience.

The Interlock Spring is an OEM part for Whirlpool microwaves. It is located within the door assembly and provides proper tension to assist with smooth opening and closing of the microwave door. The spring allows for controlled movement that facilitates easy access when using the microwave.

Causes of failure could be normal wear and tear over time, damage from rough or forced handling of the door, or failure from excessive use.

Symptoms of a bad microwave spring include:

• Difficulty opening or closing the door
• The door not staying securely closed or popping open on its own
• Excessive vibration or noise related to door operation

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air, and some Kenmore models.

This door latch spring restores the return tension in your microwave's door release mechanism so the latch engages and releases correctly. Replacing a fatigued or broken spring helps ensure safe door operation and reliable interlock switch activation.

• Provides the return force for the latch lever/door release button
• Helps door hooks engage fully and release smoothly
• Supports proper interlock switch actuation so the unit will run only when the door is closed
• Typical failure signs: door won't latch, "open/close door" error, door button sticks, or needing to hold the door shut to start

• Disconnect power. Microwaves can retain dangerous high voltage even when unplugged; discharge the capacitor
• Access the latch assembly behind the control panel; note the spring's orientation and attachment points
• Use needle-nose pliers to install without overstretching; inspect the latch lever and door hooks for wear
• Verify proper door closure and interlock switch operation before reassembly

A replacement tension spring used to restore normal movement and positioning for the affected appliance component. Replaces a worn or broken spring to help parts return to their intended position and reduce loose or uneven operation. What it does:

• Provides tension or counter-force for a door, drawer or linkage so the part moves smoothly and returns to position.
• Restores alignment and prevents sagging, slamming, or parts that don't stay in place.
• Reduces noise and uneven movement caused by a stretched or broken spring.
• Useful when a worn spring causes intermittent operation or poor component response.

• Disconnect power and water before servicing. Wear eye protection and gloves — springs can release suddenly.
• Inspect mounting points, clips and anchors; replace any damaged hardware to ensure proper function.
• Use appropriate tools (needle-nose pliers, spring hook) and follow OEM instructions for safe installation.

This replacement spring restores proper tension in the affected mechanism so levers, latches, or linkages move smoothly and return to position. A fresh spring helps eliminate sticky action and inconsistent feel in your cooking appliance.

• Provides the return force for a lever, latch, or linkage
• Helps maintain smooth, consistent engagement of moving parts
• A weakened or broken spring can cause sticking, loose action, or parts that don't return to rest
• Replacing the spring can resolve sluggish operation and intermittent function

• Disconnect power at the breaker or unplug the appliance before servicing
• Note the original spring's orientation and mounting points; take reference photos before removal
• Use needle-nose pliers for handling; avoid overstretching the coils and verify smooth movement before restoring power

This replacement tension spring restores proper tension to the appliance's moving mechanism so doors, latches or linkages operate smoothly and reliably. It's a simple wearable part that helps fix sagging or loose motion. What it does:

• Provides tension for a door, latch or linkage to return to the correct position
• Helps stop door sag, uneven closing or loose movement
• Eliminates slack that can cause rattling or noisy operation
• Restores proper alignment so mechanical interlocks engage

• One tension spring

• Disconnect power and/or supply (unplug or shut off circuit) before starting
• Release stored tension carefully—use proper tools and eye protection
• Inspect mating parts (pins, clips, brackets) and replace if worn

This replacement door tension spring restores proper door balance and closure on compatible Whirlpool appliances, helping the door stay aligned and close securely. It's a direct-fit repair part when the existing spring is worn or broken. What it does:

• Provides counterbalance tension so the appliance door opens and closes smoothly
• Prevents the door from sagging, sticking, or not staying fully closed
• Reduces excess strain on hinges and latch mechanisms caused by a weak spring
• Helps eliminate rattling or uneven door movement that can occur when springs fail

• One replacement door tension spring

• Disconnect power and empty the appliance door area before starting any repair
• Use caution: springs are under tension—wear safety glasses and gloves
• Typical install requires basic hand tools; follow OEM diagram for correct routing and attachment

This coiled tension spring restores proper tension and movement for the appliance component it supports, helping doors, lids or moving mechanisms operate smoothly and reliably after the original spring wears or breaks. What it does:

• Provides restoring tension to return and hold moving parts (doors, lids, levers) in their correct position.
• Replaces worn or broken springs that can cause sagging, failure to stay closed, or loose/rattling motion.
• Reduces squeaks or abnormal noise caused by a compromised spring.
• Restores predictable, even movement when installed in the original mounting orientation.

• Always disconnect power (and water/gas if applicable) before starting any repair.
• Use appropriate tools and wear eye protection; springs can store tension and may release suddenly.
• Note the spring's orientation and attachment points before removal so the replacement installs the same way.

This tension spring restores proper movement and tension for the appliance component it secures, helping the part operate smoothly and reliably. It's a simple replacement that fixes common issues caused by worn or broken springs. What it does:

• Provides tension to hold or return a moving component to its correct position
• Helps stop sagging, slipping, or loose operation of doors, latches, or levers
• Can reduce rattling or unusual noises caused by a failed spring
• Restores normal mechanical action when the original spring is stretched or broken

• Disconnect power to the appliance before starting any repair
• Springs can be under tension—use appropriate tools and wear eye/hand protection
• Compare the new spring to the old one for length, coil size, and end fittings before installation

This replacement spring hook secures a door/spring assembly to restore proper tension and alignment so the door closes and operates as intended. Fits the OEM spring mounting location and installs in minutes with basic hand tools. What it does:

• Latches and anchors a door or tension spring to maintain spring tension and proper door movement
• Helps stop door from sagging, not fully closing, or coming loose when the hook has worn or detached
• Durable stamped metal construction for reliable holding strength under normal use
• Works as the direct replacement piece for the corresponding OEM spring attachment point

• One spring hook replacement part

• Disconnect power (and gas or fuel if applicable) before starting repairs
• Relieve spring tension carefully; springs can be under high load—wear eye protection and gloves
• Use common hand tools (screwdriver, pliers) to remove and attach the hook; retain any clips or fasteners

Replacement interlock spring that provides tension for the appliance door latch so the door closes and the interlock switch can engage for normal operation. Restores reliable door engagement and latch return in compatible Whirlpool appliances. What it does:

• Provides tension to the door latch/interlock assembly so the door stays securely closed during use.
• Ensures the latch returns to the closed position and allows the interlock switch to complete the appliance's safety circuit.
• Helps resolve symptoms such as a loose or non-returning latch, door that won't stay closed, or cycles that stop because the door won't engage.
• Works as a direct replacement for the listed interlock spring in compatible Whirlpool assemblies.

• Disconnect power to the appliance before servicing to avoid electric shock or injury.
• Basic hand tools are typically required; panels or the door may need partial disassembly—refer to the model's service guide.
• Inspect the latch, striker, and interlock switch for wear or damage and replace if needed; improper installation can prevent correct engagement.

A small replacement push-button spring that restores reliable button return and control feel on affected appliances. Replaces worn or broken button springs so controls snap back and operate more consistently. What it does:

• Provides tension behind a push button so the button returns to its original position after pressing
• Restores proper button feel and prevents buttons from sticking or remaining depressed
• Helps resolve intermittent or unresponsive control-button action caused by a weak or broken spring
• Used in push-button/control-panel assemblies where a compact compression spring is required

• Disconnect power to the appliance before accessing controls to reduce shock risk
• Remove the control panel or button assembly per your model's service instructions; keep small parts secure
• Note spring orientation and seating; use needle-nose pliers if needed to position the spring carefully

This replacement tension spring helps restore proper door movement and balance on compatible refrigerators. It provides controlled counterbalance so the door opens and closes smoothly and stays in the intended position. What it does:

• Applies tension to the door hinge or counterbalance mechanism to control opening and closing
• Reduces door slamming and helps the door remain open or closed as designed
• Restores proper alignment and balance when an old or damaged spring fails
• Commonly replaced when the door feels heavy, drops open, or won't stay in position

• One tension spring as shown

• Disconnect power to the appliance before starting any repair to avoid injury
• Use basic hand tools; some installations require removing the door or hinge cover to access the spring
• Springs are under tension—wear eye protection and follow safe handling procedures