Refrigerator Dispenser Latch Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W11700916
Fix a washer that won't start or stays locked with a new lid lock assembly. This safety latch secures the lid during cycles. DIY-friendly repair.
Do-It-Yourself Stories from Customers like You
No drain Morris N. • Capt. Cook , HI • May 10, 2026
Replace lid lock switch
Read more
More
$49.76
- Compare At:
-
$59.71
- You Save:
-
$9.95
Genuine Frigidaire part
By: Frigidaire
Part Number: 242074223
The Dispenser Assembly is an OEM part for Frigidaire refrigerators. It is responsible for dispensing water and ice from the refrigerator door, providing easy access to chilled water and ice cubes.
Causes of a bad dispenser assembly can include electrical issues, wear and tear over time, or physical damage to the dispenser mechanism or housing. Additionally, problems with the water inlet valve or ice maker can impact the dispenser's performance.
Symptoms of a bad dispenser assembly include:
- Water or ice not dispensing
- Leaks or drips from the dispenser area
- Inconsistent or no ice production
- Unresponsive dispenser controls
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Icemaker & qater dispenser would not stop after removing the cup Chris F. • Kansas City , MO • December 12, 2015
I replaced the part by popping off the plastic frame and removing several easily-accessable screws. Three small electrical plugs had to be popped off too. It was a very simple repair. The Sears guy wanted $395 total for the repair, and I did it myself for the price of the part on this site (around $90). Very pleased!
Read more
More
$184.95
- Compare At:
-
$218.24
- You Save:
-
$33.29
Genuine Ge part
By: Ge
Part Number: WR11X10031
Ice compartment door won't stay shut? This icebox door latch secures the ice maker door closed. Easy DIY repair, typically takes 5-10 minutes.
Do-It-Yourself Stories from Customers like You
Ice maker latch broke. James G. • Weatherford , TX • August 12, 2023
Flat screwdriver. Pry cover latch off. It has two snaps. I was able to get it off without breaking it. Replace latch icebox door. Snap cover latch back on. Five minutes being very careful.
Read more
More
$11.54
- Compare At:
-
$13.85
- You Save:
-
$2.31
Genuine Frigidaire part
By: Frigidaire
Part Number: 241675704
The Solenoid and Yoke Assembly is an OEM part for Frigidaire refrigerators. It is used in the ice dispensing system to control the movement of the ice chute, allowing ice to be dispensed from the refrigerator door.
Causes of a bad solenoid and yoke assembly can include electrical issues such as a burnt-out solenoid, wear and tear from regular use, or physical damage due to mishandling or impact.
Symptoms of a bad solenoid and yoke assembly include:
- Ice not dispensing or dispensing intermittently
- Strange noises when attempting to dispense ice
- The ice chute not opening or closing properly
- Error codes related to the ice dispensing system
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Would only put out crushed ice not cubes Eugene S. • West Harwich , MA • November 02, 2014
Replaced solonoid. Video was very helpful. Parts came in the time frame given when I ordered the part. (1.7 days). Without the video I would have called a repairman. Thanks .
Read more
More
$70.95
- Compare At:
-
$83.72
- You Save:
-
$12.77
Genuine Whirlpool part
By: Whirlpool
Part Number: W11652042
Ice bucket won't stay in place or dispenser not working? This latch assembly secures the bin and aligns it with the auger. Snaps in by hand in minutes.
Do-It-Yourself Stories from Customers like You
The customer complained that the ice maker was not making ice. Julio O. • Macclenny , FL • March 30, 2022
Noticed that the ice level LED was off then removed the ice maker and checked voltage into the ice maker module (L n' V) and didn't get power. Checked continuity on the black wire (fuse) and found it ok. Checked the parts at AppliancePartsPros.com and ordered them.
Came back once got the parts. Installed the new parts then noticed that the ice maker started cycling.
Read more
More
$19.31
- Compare At:
-
$23.17
- You Save:
-
$3.86
Genuine Whirlpool part
By: Whirlpool
Part Number: WP358684
Washer won't spin or drain? A broken lid strike prevents the lid switch from detecting when the lid is closed. Easy 10-minute DIY fix with basic tools.
This part fixes the following symptoms
-
Will not agitate
-
Will not drain
-
Won't start
-
Timer will not advance
See more...
Do-It-Yourself Stories from Customers like You
The spin cycle would not initiate pump to drain tub Douglas B. • Skull Valley , AZ • January 21, 2017
Ordered new lid switch and plunger. Watched help videos and installed new parts, Washer works like new.
Read more
More
$9.63
- Compare At:
-
$11.56
- You Save:
-
$1.93
Genuine Frigidaire part
By: Frigidaire
Part Number: 240570237
The Dispenser Cover Overlay is an OEM part for Frigidaire refrigerators. This part fits over the front of the dispenser, providing a protective and decorative cover for the control panel and dispenser mechanisms.
Causes of a bad dispenser cover overlay can include physical damage from impacts, wear and tear from frequent use, or fading and discoloration from prolonged exposure to sunlight and cleaning chemicals.
Symptoms of a bad dispenser cover overlay include:
- Cracks or breaks in the cover
- Discoloration or fading of the overlay
- Difficulty using the dispenser controls
- The overlay peeling or coming loose from the dispenser
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Do-It-Yourself Stories from Customers like You
My Frigidaire refrigerator ice makers face plate was cracked. Jeff B. • Hollister , CA • December 08, 2018
So I ordered the face plate and other parts that went with it and fixed it myself. The repair man wanted around $600 to do it. I believe kt cost around $160 to fix it myself.
Read more
More
$39.56
- Compare At:
-
$47.08
- You Save:
-
$7.52
Genuine Frigidaire part
By: Frigidaire
Part Number: 241678703
Dispenser not working or loose? This refrigerator dispenser frame secures ice and water dispenser components. Moderate DIY repair with video guide.
Do-It-Yourself Stories from Customers like You
Ice dispenser not working auger not turning Roger H. • Chesapeake , VA • August 21, 2016
Replace dispenser micro switch. Also replaced broken faceplate and rusty screws. Appliance parts Pro YouTube video was helpful in diagnosis and disassembly. Parts arrived quickly.
Read more
More
$64.61
- Compare At:
-
$76.89
- You Save:
-
$12.28
Genuine Ge part
By: Ge
Part Number: WR13X10737
Ice dispenser paddle broken or won't close? This ice chute door and funnel assembly fixes stuck or damaged dispensers. Moderate DIY, 30-45 minutes.
Do-It-Yourself Stories from Customers like You
The hinge on the paddle broke so the spring was unable to return it to the off position Matthew B. • Austin , TX • January 16, 2015
Disconnect the power to the fridge.
First remove the control panel by removing the one screw underneath and then insert a screwdriver into the small square hole underneath in order to pull the lower left of the control panel towards you. You are pulling against a plastic clip and you need to pull fairly hard. Once the lower left clip is free the other three come unclipped fairly easily. At this point it will make life easier if you unclip the wiring connector from the control panel and put it...
Read more
More
$330.64
- Compare At:
-
$393.46
- You Save:
-
$62.82
Genuine Whirlpool part
By: Whirlpool
Part Number: WP67004151
Fix cracked or worn dispenser buttons with this refrigerator control panel overlay. Easy peel-and-stick installation takes 15-20 minutes with basic tools.
Do-It-Yourself Stories from Customers like You
The insert and facade of the water & ice dispenser had two broken buttons (bad design) they are intended to break Louis A. • Beaumont , CA • August 23, 2015
1. Purchased a new Facade. The removal of the old one was relatively easy except that the two screws that hold it in place (behind the spill tray) were rusted (they should have used stainless steel ones) one came out with a vise grip but on the other I had to buy an "Easy Out" tool from Home Depot, once out the unit drops down. Had my wife hold the new unit, swiped the wires from old to new, removed the control board from the old one and installed it on the new one with one screw and cleaned...
Read more
More
$52.68
- Compare At:
-
$62.69
- You Save:
-
$10.01
Genuine Frigidaire part
By: Frigidaire
Part Number: 241679001
Replace a cracked or broken dispenser cover to restore your refrigerator's appearance. Simple DIY repair, typically completed in 15 minutes or less.
Do-It-Yourself Stories from Customers like You
Existing cover was broken at the bottom corners Donald G. • Mifflinburg , PA • November 14, 2016
Replaced with ordered cover and new screws. Cover was a perfect replacement for original. Replacement took less than 15 minutes to complete.
Read more
More
$65.75
- Compare At:
-
$86.74
- You Save:
-
$20.99
Genuine Ge part
By: Ge
Part Number: WR55X10859
Fix unresponsive ice or water dispenser buttons with this control touchpad. Simple 15-minute snap-in replacement—disconnect power, unsnap old part, reconnect wires.
Do-It-Yourself Stories from Customers like You
The control surface of the ice/water dipensor assmebly was badly scrathched and worn out making the refrigerator look older than it is Jamshid R. • Manchester , NJ • December 16, 2016
Using the model number of the frig, I located the part (Interface Dispenser Asm) on the AppliancePartsPros.com. After reading the Q&A section for hints on how to change the part and looking at a couple of YouTube videos, it seemed that I was up to the task. I placed the order for the part and was pleasantly surprised that it arrived in a couple of days. Armed with a flat blade screwdriver and an old credit card, it took me about 15 minutes to first remove the bezel around the ice dispenser...
Read more
More
$178.53
- Compare At:
-
$214.24
- You Save:
-
$35.71
Genuine Frigidaire part
By: Frigidaire
Part Number: 240570236
Replace cracked or peeling dispenser cover label. Easy DIY fix—peels off like a sticker, alcohol wipe surface, press new label on. 10-minute repair.
Do-It-Yourself Stories from Customers like You
The label had cracked Charles R. • Elberton , GA • January 18, 2016
Removed old label, took the glue residue off, wiped it down with rubbing alcohol then attached the new label on to the fridge.
Read more
More
$25.55
- Compare At:
-
$30.15
- You Save:
-
$4.60
Genuine Samsung part
By: Samsung
Part Number: DA61-03769A
This is a small magnet that works with the reed switch sensor to detect whether the refrigerator door or dispenser drawer is open or closed. It triggers the door ajar alarm and controls the interior light. Replace this magnet if the door ajar alarm sounds constantly even when the door is shut, or if the interior light stays on or off regardless of door position.
Do-It-Yourself Stories from Customers like You
Leg cover broken causing freezer door alarm to continually go off Jason V. • Pearland , TX • October 01, 2017
Ordered leg. Cover and magnet switch. I did not need magnet switch, it came on the new leg cover.
Read more
More
$6.51
- Compare At:
-
$7.75
- You Save:
-
$1.24
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10152859
The refrigerator water dispenser lever arm activates water flow when pressed and returns to position when released. Replace when the lever becomes stuck, breaks off, or fails to properly activate the water dispensing mechanism.
Do-It-Yourself Stories from Customers like You
Refrigerator water dispenser stopped working Carlos R. • Houston , TX • September 19, 2014
The water dispenser stopped working on my Sears Kenmore (Whirlpool) side-by-side refrigerator and after much research on the web I purchased the parts that commonly failed for this condition. I should have first taken the dispenser assembly apart but I didn't--it looked a little too intimidating to do twice. As it turns out, what actually broke was the plastic assembly that holds the water actuator switch in place so the dispenser lever could not strike it. I was able to secure it in place...
Read more
More
$56.34
- Compare At:
-
$67.61
- You Save:
-
$11.27
Genuine Whirlpool part
By: Whirlpool
Part Number: WP4356840
Lost your freezer key or lock won't engage? This door lock key secures contents and prevents unintended opening. Simple replacement, works immediately.
Do-It-Yourself Stories from Customers like You
Freezer gasket replaced by 77 year old lady Patricia R. • Florence , OR • July 09, 2017
I purchased a freezer gasket + key// from appliancepartspros.com //easy to order. I did not need to lock up my freezer but thought it might help the gasket seat (good thought). To replace gasket I started at top of door, wow, I should have started at bottom. Hated laying on my "belly" to screw in gasket. Ok, I am 77 years old but got the job done. All went okay until I had to close the door, the door would not stay shut. Key: I locked the door for a week. New seal is settling in, freezer is...
Read more
More
$11.78
- Compare At:
-
$14.14
- You Save:
-
$2.36