Washer Vent Light Socket Parts

First off I have to say that Appliance Parts Pro's saved me from hiring a repair person, and quite possibly just getting rid of my washing machine. Their video's helped out SOOOOOOOO much and the advice one of their agents gave me over their online chat helped me trouble shoot something when I got stuck. On top of this they shipped my parts fast enough that less than 12 hrs later they arrived, which allowed me to get my machine up and running way faster than the other options I had available.... Read more

I noticed a lot of water on the floor one day. I had no idea where it came from (all pipes in the area near the stationary tub were dry, there was a small wet spot near the washer, but most of the water was more than 2ft from it). Started a small load and noticed water running down the outside of the unit. Immediately stopped the cycle and removed the front of the washer. Restarted the cycle and could see water spraying from the intake hose. Stopped the cycle and advanced it to spin to... Read more

I replaced the hose between the tub and the pump. The clamp screws were quite rusted but I used a socket wrench on them since they have hex heads in addition to the screwdriver slot. If I had tried to use a screwdriver, I think it would have been difficult. I did not reuse the original clamps but replaced them with hardware store hose clamps. Read more

I had previously replaced the transmission in my two year old Whirlpool Cabrio washing machine. Overall it was in good shape but gets heavy use. That repair was approximately $200 and worked for several months. Recently it began leaking. At first I thought it was the tub-to-shaft seal. I replaced this part but it was still leaking. It turns out it was the simplest of things... The drain hose was not connected very well! I replaced the drain hose ($11 part) and while I was at it I... Read more

The video was very helpful. the hardest part is getting off old rusted parts. I had to use a hacksaw to remove one of the old clamps. I had to open the bottom of the washing machine to remove of the other clamp. Putting the new parts on was easy. Getting everything apart was a challenge. Putting the new parts on was an easy 5 minute job. Read more

We ordered parts from appliance parts pros and I fixed it. Read more

Prior to ordering parts I had pulled the pump strainer basket and cleaned it out. There was both soft and hard scale build up. The tub-to-pump hose was also pretty crusty/slimey. Still got warnings for SUDS and repeated F02 errors. Ordered parts and replaced the pump, tub-to-pump hose, interior drain hose and exterior drain hose (both hoses has some slime build up). The water standing in the tub when I emptied it the first time had very little suds but we kept getting the SUDS warning. ... Read more

I searched YouTube and found several videos that helped me diagnose the most probable cause. I learned how to open the cabinet and access the parts from the videos. I ordered a new discharge hose and a replacement pump. The parts came in the next day with the standard shipping option! It turned out that the old discharge hose was blocked. I decided to replace the pump also since I had the machine open and the new pump was only $22. It's amazing what you can learn online! Read more

Removed the leaking hoses and seal. Installed the new ones. They all fit perfectly. The disassembly/reassembly of the washer took the most time. Read more

We watched the video on how to fix the problem. Ordered the parts and they came very quickly. My husband was able to repair the washer without any problems or complications. We are thrilled that we could solve the problem by using your parts and avoid buying a new washer. Thank you! Read more

Took the old part off and fitted the new one. I used the old plastic ball from the old hose and it worked fine. Next time I would replace the original clamp with a 4 inch hose clamp. The original clamp is way tooooooooooo hard to put back on....with a different clip it would be a 10 minute job at most. Read more

Seems like a poor design-hose developed a leak from rubbing on the support pad beneath it. Pretty easy fix if you follow one of the instructional videos online as far as how to get the front panel off of the washer. You can't change this part from the rear access panel. My washer and dryer are stacked so it added some time to the job. Read more

I spoke with the experts at parts pro and they suspected the main power board. I ordered the main power board along with the control panel. Since I was taking everything apart I decided to replace other components as well- thermostats, thermistor , sensor wire. When I was all done the old LG was back to working like new. Oh while I was at it I cleaned and vacuumed out the complete machine. Great factory parts, videos p, service and videos, the price of all the parts was less than a repair... Read more

Upon cleaning my washer filter, I noticed that the hoses were very dirty. Instead of trying to clean, I decided to purchase new ones. Good price and fit perfect. Thanks Read more

Ordered the part got it in 2 days Read more

Replace injector. Placing liquid soap on the injector cover help insert the assembly into the hose. Read more