Washer Clock Timer Motor Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W10756692
This motor control board is created for use with washing machines. It's located inside the washing machine, where users can change settings and start or stop the appliance. It is tasked with regulating how quickly the washer spins during a cycle. Wear and tear or damage can cause the motor control board to malfunction. This may make it impossible for the washer to agitate or spin. If this happens, a replacement will need to be made.To replace this part, start by unplugging the appliance. Once the area is safe, the bottom front panel should be removed. This will provide access to the original motor control board. Pull on the motor control board until the wires can be reached. The position of these components should be noted before taking out the part. Replace with a new motor control board and replace the wires.This motor control board is designed to fit washing machines made by Maytag, Whirlpool, Kenmore, and KitchenAid. This is an authentic OEM replacement part that is sourced directly from the manufacturer. It's sold as a single part.
Do-It-Yourself Stories from Customers like You
Whirlpool duet washing machine 7mghw9100mw1 with f06 error code Isaac G. • Mcallen , TX • November 03, 2014
We started getting the F06 code when on the normal cycle it was time to Rinse/Spin, pointing to a speed/tachometer issue on the motor. After several attempts of unplugging from power and restarting the cycle it would eventually start working for the rest of the laundry session. The Whirlpool technician after a brief look on the underside determined it was the motor and had to be replaced, even tough all troubleshooting tests on the motor were ok. I insisted that the probability was much higher...
Read more
More
$277.99
- Compare At:
-
$305.94
- You Save:
-
$27.95
Genuine Whirlpool part
By: Whirlpool
Part Number: W10860464
Fix a washer that won't start, has all lights on, or runs erratically. This electronic control board restores proper cycle control. Moderate difficulty.
Do-It-Yourself Stories from Customers like You
All indicator light show up on electronic main control board and machine won’t start. Thomas H. • Dedham , MA • July 24, 2021
Replace the Mainboard control and push the start button.
Read more
More
$220.25
- Compare At:
-
$242.28
- You Save:
-
$22.03
Genuine Frigidaire part
By: Frigidaire
Part Number: 131758600
Washer won't advance through cycles or stops mid-cycle? The timer controls wash, rinse, and spin sequences. DIY-friendly repair restores normal operation.
Do-It-Yourself Stories from Customers like You
The washer wouldn't advance to the next cycle Alphonso C. • Axton , VA • January 03, 2017
I replaced the timer
Read more
More
$215.79
- Compare At:
-
$254.63
- You Save:
-
$38.84
Genuine Lg part
By: Lg
Part Number: 4413EA1004D
Fix squealing or grinding noises during spin cycles with this washer motor rotor assembly. Works with the stator to rotate the drum. Video guide available.
Do-It-Yourself Stories from Customers like You
Bearings let go in clutch, loud noise would not spin or cycle, code for out of balance came on and then LE for drum sensor, the rotor bushing got bent when the bearings went Guy G. • Portersville , PA • August 07, 2020
Ordered new clutch, rotor and drum sensor assembly. If your clutch bearings go, make sure you check rotor, stator and sensor for damage.
Read more
More
$195.73
- Compare At:
-
$230.96
- You Save:
-
$35.23
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3953321
Fix a washer that stops mid-cycle or won't advance with this mechanical timer. Controls wash, rinse, and spin sequences. 10-20 minute DIY repair.
Do-It-Yourself Stories from Customers like You
Timer had gone out and lid switch as well William D. • Jamestown , CA • July 18, 2014
After opening the area where the timer was housed, I removed the old timer & replaced it with the new one. The repair was so easy we were back to washing clothes in 10 minutes.
Read more
More
$208.95
- Compare At:
-
$250.74
- You Save:
-
$41.79
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8546685
Fix a washer that won't advance cycles or stops mid-cycle with a new timer control. Common DIY repair taking 10-15 minutes with basic tools.
Do-It-Yourself Stories from Customers like You
Whirlpool washer timer Shawn C. • Sykesville , MD • May 23, 2014
Watched the video , perfect instructions, part on time, right part , took 10 min to replace
Read more
More
$196.95
- Compare At:
-
$234.37
- You Save:
-
$37.42
Genuine Whirlpool part
By: Whirlpool
Part Number: W11400681
Fix a washer that won't start, stops mid-cycle, or shows error codes with a new electronic control board. This part controls all washer functions.
Do-It-Yourself Stories from Customers like You
Lf fault had replaced the valve and still wasn’t filling so replaced the harness and board that solved the problem Samuel S. • Martinez , CA • June 07, 2026
By replacing more parts
Read more
More
$261.77
- Compare At:
-
$294.04
- You Save:
-
$32.27
Genuine Whirlpool part
By: Whirlpool
Part Number: W11283592
Washer won't spin or agitate? Drive motor powers the wash and spin cycles. Common fix for humming motor that won't start or burning smell issues.
Do-It-Yourself Stories from Customers like You
Motor pulley Doug D. • Georgetown , IN • June 01, 2021
Installed new motor with a metal pulley from APP and VIOLA!
Great service, support and inventory.
HIGHLY RECOMMEND!
Read more
More
$193.95
- Compare At:
-
$228.86
- You Save:
-
$34.91
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22001025
Washer won't advance through cycles or skips steps? This timer controls wash, rinse, and spin sequences. Moderate DIY repair restores cycle operation.
Do-It-Yourself Stories from Customers like You
Washing machine would not agitate or spin Cherylann W. • Woburn , MA • January 06, 2015
The washing machine intermittently would not agitate or spin. A reset of the timer dial fixed it. Then nothing fixed it. Originally thought it was the timer but father wanted to check out other possibilities. So he brought his meter over and went through all that he could, including checking power to the motor below. All was good electrical-wise. On the holiday, January 1, a rep. at AppliancePartsPros assured me that if a new timer did not fix the problem, I could return the item, even...
Read more
More
$190.68
- Compare At:
-
$226.91
- You Save:
-
$36.23
Genuine Whirlpool part
By: Whirlpool
Part Number: WP661649
Fix a washer that won't spin, skips cycles, or stops mid-cycle. This timer controls cycle progression and power routing. Moderate DIY repair.
Do-It-Yourself Stories from Customers like You
Washer would fail to complete spin cycles Robert H. • Alpine , TX • February 14, 2015
I started by replacing the lid switch without the desired result. So I decided to replace the timer unit. It works like a new machine at the moment. At least on the first trial load. More loads will convince me that it is fixed for sure. I cannot be more complimentary about Appliance Parts Pros as I live very remotely in West Texas. The part arrived quickly and it was the exact right part required as ordered. This is my second order and I will return for more parts if I need them.
Read more
More
$179.95
- Compare At:
-
$214.14
- You Save:
-
$34.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10177827
Fix a washer that agitates before filling or adds water after the final spin. This timer controls wash cycle sequences. DIY repair in 15-20 minutes.
Do-It-Yourself Stories from Customers like You
Washer machine timer failed would not add water before agitation started Robert B. • Rotonda West , FL • May 16, 2014
Found replacement timer at Appliances Parts Pros. Ordered on a Sunday (as all appliances fail on the weekend) and with expedited shipping got the part on Tuesday morning. Video from Appliance Parts was very helpful and entire replacement took less than 15 minutes. I also purchased a timer for a dryer earlier and had the same positive experience.
Read more
More
$227.29
- Compare At:
-
$270.48
- You Save:
-
$43.19
Genuine Whirlpool part
By: Whirlpool
Part Number: W10832724
Washer won't spin or agitate? A faulty drive motor causes humming noises and stopping mid-cycle. This direct replacement restores drum rotation.
Do-It-Yourself Stories from Customers like You
Machine stops between cycles & lid unlocks requires manual cycle movement to finish wash James K. • Plano , TX • November 29, 2015
This was a tricky one to figure out. The Maytag Centennial MVWC400XW4 would fill and wash, then stop before spin cycle or would not complete the spin cycle. We had to manually move the dial to rinse & spin, etc. to get it to finish a load. This technique worked but it definitely became a pain to do and at the time we didn't notice how much longer the machine took calibrating a wash load.
I called Sears initially thinking I really didn't want to mess with this and they came out. They...
Read more
More
$175.51
- Compare At:
-
$213.30
- You Save:
-
$37.79
Genuine Samsung part
By: Samsung
Part Number: DC31-00112A
The washer motor rotor assembly is the outer rotating component of a direct-drive washer motor that works with the stator to generate the electromagnetic force that spins the wash basket. It is a core part of the motor system that drives both the wash and spin cycles. Replace this part if your washer won't spin or agitate, makes a loud grinding or humming noise during a cycle, or if the machine shakes excessively during operation.
This part fixes the following symptoms
-
Will not agitate
-
won't spin
See more...
Do-It-Yourself Stories from Customers like You
3C error code George W. • Glen Burnie , MD • October 18, 2019
Actually, I am returning your parts. THERE IS NOTHING WRONG WITH THEM! My wife actually found out that we had a warranty on our washer that we didn't know about. But, I can comment that I did chat with your customer service and you guys were very helpful.
Read more
More
$197.95
- Compare At:
-
$235.56
- You Save:
-
$37.61
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10192966
This is the main electronic control board that manages the washer's cycles, motor operation, water levels, and other key functions. It receives input from the user interface and sends signals to the various components to run each wash cycle properly. Replace this board if the washer fails to start, stops mid-cycle, displays error codes, or exhibits erratic behavior that is not caused by a faulty sensor or wiring issue.
More
$389.47
- Compare At:
-
$459.57
- You Save:
-
$70.10
Genuine Samsung part
By: Samsung
Part Number: DC92-01621D
Fixes washer stuck in cycle, won't drain, or won't turn on issues. Restores automatic cycle transitions and water fill control. 15-minute DIY repair.
Do-It-Yourself Stories from Customers like You
Error code e4 the washer stopped at the rinse cycle and would not fill with water John M. • Ottsville , PA • October 14, 2016
The error code implies a faulty fill valve. This was not the case for me. Replacing the main PCB assembly solved the problem. I have run two full loads since the repair with no problems.
Read more
More
$287.95
- Compare At:
-
$339.78
- You Save:
-
$51.83
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10111389
Fix a washer that won't advance through cycles or gets stuck mid-wash. This timer controls cycle sequencing. Most DIYers complete this repair in 20 minutes.
Do-It-Yourself Stories from Customers like You
Bad timer Jrichard M. • Huntsville , AL • November 13, 2014
Ordered a new timer from Appliance Pros.com
Read more
More
$169.36
- Compare At:
-
$199.84
- You Save:
-
$30.48