Washer Sensor Control Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP661636
Fix a washer that won't advance cycles, skips spin, or won't drain. Timer replacement restores proper cycle progression. DIY repair in under 30 minutes.
Do-It-Yourself Stories from Customers like You
Washing macmachine would not spin after rinse cycle whithout raising the lid or turning the machine off and back on Jerry W. • Paris , TX • September 17, 2016
Got help from the internet to diagnose the problem. Seens that the neutral drain part of the transmission will not shift to spin unless there is a pause after draining. Thought the problem might be in the transmission but found the timer wasn;t allowing a pause after draining.therefore the machine would not spin. Replaced the timer and problem was solved.
Thanks for your help,
Jerry w.
Read more
More
$206.95
- Compare At:
-
$248.34
- You Save:
-
$41.39
Genuine Frigidaire part
By: Frigidaire
Part Number: 137005010
Washer won't start, stops mid-cycle, or displays error codes? The main control board manages all cycle functions. Moderate DIY repair, 30-45 minutes.
Do-It-Yourself Stories from Customers like You
Beeping problem Paul M. • Hyattsville , MD • June 17, 2014
I had a beeping problem with my washer whereby it kept on beeping when I turned it on. After researching the issue online I saw that the control panel was the issue so I ordered a new one and installed it and voila!!! Problem solved!!
It was an easy fix and the only hard part was lifting the dryer from the washer so as to replace the part.
Read more
More
$211.95
- Compare At:
-
$252.22
- You Save:
-
$40.27
Genuine Speed Queen part
By: Speed Queen
Part Number: 38881P
Washer won't advance cycles, keeps filling, or skips rinse/spin? Timer controls cycle sequences. Moderate DIY repair restores proper wash timing.
More
$260.24
- Compare At:
-
$309.69
- You Save:
-
$49.45
Genuine Frigidaire part
By: Frigidaire
Part Number: 134237200
Fix a washer that won't advance cycles, stops mid-cycle, or runs continuously. This control timer regulates wash and spin durations. 30-minute repair.
Do-It-Yourself Stories from Customers like You
My washer wasn't spining Jose M. • Germantown , MD • November 02, 2015
Well it was easier it took me less than 30 minutes
and my hasher is ready to be used thankyou.
Read more
More
$216.95
- Compare At:
-
$260.34
- You Save:
-
$43.39
Genuine Whirlpool part
By: Whirlpool
Part Number: W10480177
Fix a washer that won't start, cycle properly, or respond to controls. This control board replacement restores normal operation. Moderate DIY repair.
Do-It-Yourself Stories from Customers like You
Washing machine would not cycle correctly Mike H. • Waukesha , WI • February 07, 2015
Removed control panel from the machine, unbolted control board, replaced with new one, changed connections from old to new and put back together.
Read more
More
$220.43
- Compare At:
-
$234.26
- You Save:
-
$13.83
Genuine Whirlpool part
By: Whirlpool
Part Number: W11481116
Fix a washer with no lights or unresponsive controls by replacing the encoder control board. Moderate difficulty repair requiring panel removal.
More
$59.48
- Compare At:
-
$71.38
- You Save:
-
$11.90
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3946430
Fix a washer that won't advance cycles, skips spin, or stops mid-wash. This timer controls cycle progression. Straightforward DIY repair for most users.
Do-It-Yourself Stories from Customers like You
Washer was not cycling properly would not slow agitate drain or spin timer would move but no response from machine John S. • Bethesda , MD • June 15, 2020
I replaced the timer, and the problem was solved. The only problem I had was the screw holes in the new timer would not accept the screws from the old timer, so I used self tapping screws. Otherwise, a straightforward fix and fairly easy to do.
Read more
More
$223.95
- Compare At:
-
$264.26
- You Save:
-
$40.31
Genuine Frigidaire part
By: Frigidaire
Part Number: 137006005
This control board is the appliance's primary printed circuit board. It governs cycle timing, options, and power to key components. Replacing a failed PCB can restore responsive controls and consistent operation across all cycles.
- Coordinates inputs from sensors/controls and directs outputs to motors, valves, pumps, and other loads
- Manages cycle sequencing and option selections as designed by the manufacturer
- Symptoms of a failing board can include no start/no response, cycles that won't advance or end early, intermittent/erratic operation, blank or flickering indicators, or recurring error codes
What's included: One printed control board (PCB) Install notes:
- Disconnect power before servicing; do not work on a live appliance
- Use ESD protection and handle the board by the edges to avoid damage
- Photograph existing wiring; move connectors one at a time to the matching positions on the new board
- Secure the board and any covers before restoring power; run a test cycle/diagnostic per your model's service information
Do-It-Yourself Stories from Customers like You
I kept getting "e90" error code and washer wouldn't start washing cycle Richard R. • Glendora , CA • November 08, 2015
After doing online research about this particular error code I found www.appliancepartspros.com. On the site I searched my washing machine's model number and I found the correct part (in my case, it was the main control board) at a discounted price. I figured that with their no hassle return policy it was a no brainer trying to replace the part myself. The process went fairly smooth. If you're replacing this part yourself, be sure to disconnect your machine from the power outlet first to avoid...
Read more
More
$215.95
- Compare At:
-
$254.82
- You Save:
-
$38.87
Genuine Ge part
By: Ge
Part Number: WH12X10475
Fix a washer that won't start, is stuck in a cycle, or won't progress through wash modes. This main control board manages timing and operation. 15-minute DIY fix.
Do-It-Yourself Stories from Customers like You
Machine was stuck in diagnostic mode Phillip M. • Fort Lauderdale , FL • October 02, 2014
I changed the control board
Read more
More
$133.52
- Compare At:
-
$158.89
- You Save:
-
$25.37
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22003361
Fix a washer that won't advance through cycles, fills but won't spin, or stops mid-cycle. This timer controls wash, rinse, and spin sequences. 30-minute DIY repair.
Do-It-Yourself Stories from Customers like You
Washing machine would not complete all of it's cycles David G. • Ballwin , MO • February 24, 2017
Replaced the main timer / control.
Read more
More
$222.52
- Compare At:
-
$264.80
- You Save:
-
$42.28
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22004189
Fix a washer that won't advance cycles, stops mid-cycle, or hums but won't spin. This mechanical timer controls wash sequences. DIY-friendly repair.
Do-It-Yourself Stories from Customers like You
Washer machine water dripping into tank when off and timer would stop on regular cycle after a wash and would not go any further to spin or rinse Victor F. • San Antonio , TX • March 14, 2015
Appliance Parts Pros I've used in the past and will continue to use, now they have a video showing step by step how to change the part your going to purchase, video also explains what the part does and symptoms of bad existing parts like mine.
Washer machine was dripping water into tank when not in use, it was the water inlet valve. I purchased on a Sunday and it arrived with our mailman on Wednesday. I watched the repair video one more time and changed it out. When you unhook hoses to remove...
Read more
More
$156.74
- Compare At:
-
$188.09
- You Save:
-
$31.35
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8546681
Washer won't advance cycles or stops mid-cycle? This timer sequences fill, wash, drain, and spin stages. Moderate DIY repair restores cycle control.
Do-It-Yourself Stories from Customers like You
Wouldn't complete cycle, finish rinsing David H. • Corpus Christie , TX • April 08, 2014
Watched instructional viedeos on how to replace timer.
Read more
More
$188.95
- Compare At:
-
$226.74
- You Save:
-
$37.79
Genuine Whirlpool part
By: Whirlpool
Part Number: W11126319
This coin chute guides coins from the slide into the coin mechanism so the machine can register payment and begin a cycle. Keeping the chute intact and aligned helps prevent jams and misfeeds in coin-operated laundry equipment.
- Directs coins from the slide to the coin mechanism to register payment
- Helps ensure smooth coin drop, reducing bounce-back and misfeeds
- Common fix when coins jam, fall into the cabinet, or the unit won't start after payment
- Replace if cracked, bent, corroded, or missing
Install notes:
- Disconnect power; shut off gas before service
- Open the coin housing/slide assembly and retain existing hardware
- Install the new chute in the same orientation; align with slide and mechanism, then secure
- Test with sample coins to ensure proper drop and operation before returning to service
Do-It-Yourself Stories from Customers like You
The door latch was bad the control board and coin control board Christopher E. • Lansing , IL • May 18, 2016
A new set of control board, coin control board and the door latch was installed, and the washing machine was reprogrammed.
Read more
More
$178.95
- Compare At:
-
$212.95
- You Save:
-
$34.00
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3951769
Fix a washer that won't advance cycles, skips rinse, or stops mid-cycle. This timer controls wash, rinse, and spin functions. Moderate DIY repair.
Do-It-Yourself Stories from Customers like You
Machine would only wash in every wash position on the dial but it would not drain or spin Delbert R. • Detroit , MI • September 02, 2014
Normally I would do a better job of investigating my problem with what others have experienced and then proceed with the cheapest fix first. This time though I just knew it was the timer. I ordered the correct part, installed it, plugged in the cord, turned on the washer and still no drain and no spin. What a defeated feeling. So I went back to the web site. Sure enough there was a simple fix to the problem. The washer door switch. But now, what do I do with this new timer? Back to the...
Read more
More
$238.95
- Compare At:
-
$284.35
- You Save:
-
$45.40
Genuine Whirlpool part
By: Whirlpool
Part Number: WP661597
Washer won't advance through cycles or gets stuck in fill mode? A faulty timer prevents proper cycle progression. Restores automatic advancement.
Do-It-Yourself Stories from Customers like You
The machine would not move through its cycles Wayne M. • Fairbanks , AK • September 17, 2014
Replaced the timer
Read more
More
$192.95
- Compare At:
-
$231.54
- You Save:
-
$38.59
Genuine Lg part
By: Lg
Part Number: 6322FR2046G
Washer not heating water or showing tE error? This temperature sensor monitors water temp and signals the control board. Moderate DIY repair fixes temp issues.
Do-It-Yourself Stories from Customers like You
Te error code on my kenmore elite washer Angela R. • Rushville , IN • February 08, 2015
Ordered a new thermistor and replaced the one that the wires had pulled out of.
Note- we secured the wires on the new thermistor with electrical tape before installing.
Read more
More
$38.28
- Compare At:
-
$45.55
- You Save:
-
$7.27