Washer Fuse Or Sensor

The Dryer Thermostat is an essential component for maintaining the optimal performance of your Samsung dryer. This genuine OEM part ensures precise temperature regulation, preventing overheating and enhancing the safety of your appliance. Designed specifically for Samsung dryers, it guarantees a perfect fit and seamless integration with your existing system. With accurate temperature control, this thermostat helps your dryer operate efficiently, reducing energy consumption and extending the lifespan of your machine. Installing the Dryer Thermostat is straightforward, allowing you to quickly restore your dryer's functionality without hassle. By choosing this genuine OEM part, you can trust in the quality and durability that Samsung is known for, ensuring your dryer performs at its best for years to come. Whether you are replacing a faulty thermostat or upgrading your dryerGÇÖs components, the Dryer Thermostat offers the reliability and performance you need for a smooth and efficient drying experience. Invest in this high-quality thermostat to keep your laundry routine running seamlessly and enjoy the benefits of a well-maintained dryer.

The Moisture Sensor Bar is an OEM replacement part for Whirlpool dryers. It is a component located inside the dryer drum that senses the moisture level of clothes during tumble drying cycles. The moisture sensor bar utilizes sensors or probes to gauge how dry clothes are getting and signals the dryer to shut off once clothes reach the desired dryness level selected by the user.

Symptoms of a bad moisture sensor bar include:

• Dryer failing to shut off automatically at the end of cycles, leaving clothes over-dried
• Cycles taking excessively long to complete 
• Dryer not sensing moisture levels properly to allow automatic ending of cycles

Causes of a faulty moisture sensor bar are usually due to normal wear and tear over time. Dust or lint buildup can also affect its ability to provide accurate readings.

This OEM replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models. 

The Sensor Assembly is an OEM part for LG washing machines. This component is crucial for detecting and monitoring various conditions within the washing machine, such as water level, temperature, and load balance. It ensures the machine operates efficiently and effectively by providing accurate data to the control board.

Causes of a bad sensor assembly can include wear and tear from regular use, exposure to water and detergents, electrical malfunctions, or damage from impact. A faulty sensor assembly can lead to incorrect readings, which can affect the washing machine’s performance and lead to issues such as improper water levels or unbalanced loads.

Symptoms of a bad Sensor Assembly include:

• Incorrect water levels during cycles
• The washing machine stopping mid-cycle or not completing cycles
• Error codes related to water level or load balance
• The machine failing to start or operate correctly

This OEM LG part is also compatible with Sears/Kenmore models.

The Thermistor Assembly is an OEM component specifically designed for front loading LG washing machines. It plays an important role in monitoring and regulating temperatures during heated wash cycles. The thermistor detects temperature changes within the wash drum and sends this information to the control board to ensure clothes are washed at the optimal temperature.

Causes of a bad thermistor assembly can include general wear and tear over time, exposure to extreme temperatures, or damage due to impact or mishandling during cycles.

Symptoms of a bad thermistor assembly include:

• Inability to reach or maintain set temperatures
• Fluctuating water temperatures
• Error codes related to temperature sensing

This OEM LG part is also compatible with Sears/Kenmore washers.

The Rotor Position Sensor is an OEM part for LG washing machines. This sensor monitors the speed and direction that the washing machine tub is spinning. It ensures the tub rotates properly in both clockwise and counterclockwise motions during cycles.

Causes of a bad rotor position sensor can include wear and tear from extended use agitating heavy loads, breakage from impact or moisture damage, or compromised wiring over time.

Symptoms of a bad rotor position sensor include:

• Tub failing to spin or agitate clothes during cycles
• Inability to detect spin cycle direction changes
• Repeated errors messages related to tub operation
• Long cycle times as the sensor cannot monitor load movement

This OEM LG part is also compatible with some Kenmore models.

This thermistor assembly monitors water temperature inside the washer tub and relays a precise signal to the control board. Replacing a failed sensor restores accurate temperature sensing and helps prevent cycle errors and performance issues. What it does:

• Measures wash water temperature and sends the signal to the electronic control
• Enables the control to adjust cycle operation based on temperature feedback
• Common failure signs: tE/TE error codes on some models, incorrect temperatures, long cycles, or cycles that won't advance
• Intermittent faults may cause sporadic errors or inconsistent performance

• 1 thermistor assembly

• Disconnect power and shut off water before servicing
• Access location varies by model; the sensor is typically mounted in the outer tub or heater housing
• Unplug the harness, pull the old sensor straight out; seat the new sensor fully and reconnect the harness
• Route wiring away from moving parts; restore power and run a test cycle, checking for proper operation and any leaks around the sensor port

This wire harness routes power and signals between the washer's control and multiple components. Replace a damaged harness to restore dependable operation when wiring is cut, brittle, or connectors are heat-damaged or corroded.

• Distributes electrical power and communication between the control board and components such as the motor, pump, valves, door lock, and sensors
• Maintains safe, reliable connections when insulation and terminals are intact
• Typical failure signs: intermittent operation, no start, specific loads not working (pump/motor/valves), or error codes traced to wiring faults
• Visible damage like chafed wires, broken connector locks, or burned/corroded terminals indicates replacement

• Disconnect power and turn off water supply before servicing; wear cut-resistant gloves
• Photograph and label connectors; move one plug at a time from old to new to avoid miswiring
• Route along original clips, channels, and grommets; keep wiring clear of sharp edges and moving parts
• Ensure all connectors are fully seated; test operation before final reassembly

This door-mounted dispenser stores and releases detergent and rinse aid at the correct times during the cycle, helping restore consistent cleaning and drying results. Replace a worn or damaged unit to fix soap door and rinse aid issues.

• Holds detergent for the main wash and opens the cup during the programmed step
• Meters rinse aid into the final rinse to reduce spotting and improve drying
• Helps resolve symptoms like detergent left in the cup, soap door won't latch/open, leaking rinse aid, or poor cleaning performance
• Direct replacement for the original door dispenser assembly

• Disconnect power to the dishwasher before servicing
• Remove the inner door panel to access the dispenser; disconnect the wire harness
• Release the retaining tabs/screws, remove the old dispenser, and clean the sealing surface
• Seat the new dispenser flush, tighten mounting screws evenly, reconnect wiring, and run a test cycle to check for leaks and proper operation

This 250V, 1A fuse protects your washer's control circuit from overcurrent. Replacing it can restore control power once the root cause is corrected.

• Opens to protect electronics when current exceeds its 1A rating
• Check this part if the washer has no power, the control panel is dead, or it won't start
• A blown fuse will test open for continuity
• Repeated failure points to an underlying short or component fault that must be fixed

• Disconnect power before servicing
• Access the fuse at the control board or fuse holder
• Replace only with the same rating: 1A, 250V
• Inspect wiring/components and correct any short before restoring power

This NTC thermistor is a refrigerator temperature sensor that monitors cooling system temperature and helps the control board maintain proper operation. It replaces a failed sensor to restore accurate temperature sensing and reliable cycle control. What it does:

• Measures internal temperature and sends a changing resistance signal to the control board
• Helps the fridge adjust compressor/fan cycles for stable cooling
• Common symptom fix: erratic or incorrect temperatures, frequent cycling, or temperature-related error codes
• Works as the sensor used in evaporator/air temperature sensing circuits (model-dependent)

• One NTC thermistor sensor (wiring and connector as shown)

• Disconnect power before servicing to avoid shock or damage
• Handle the sensor and wiring gently; avoid kinking or stretching the lead wires
• Mount and route the sensor per the unit's service diagram so it contacts the intended location
• Verify sensor response with a multimeter (NTC resistance should change with temperature) or follow the manufacturer's service procedure

This thermistor assembly senses appliance temperature and sends readings to the control board so the unit can regulate cooling. Replaces a failed or intermittent sensor to restore accurate temperature monitoring. What it does:

• Measures internal temperature and provides variable resistance feedback to the control board.
• Helps the control system maintain desired cooling by reporting temperature changes.
• A faulty thermistor can cause temperature fluctuations, poor cooling, or incorrect temperature readouts.
• Can clear temperature-related error codes when replaced as directed by diagnostics.

• Disconnect power to the appliance before starting any repair to avoid electric shock.
• Handle the sensor and wiring gently; avoid pulling on wires or connectors.
• Install in the original sensor location and route wiring as OEM to prevent interference or damage.

This genuine replacement sensor monitors operating conditions in your appliance and restores accurate readings so controls can regulate cycles and performance. It's a direct-replacement sensing element used by the control system. What it does:

• Detects operating condition changes (temperature/level/position depending on application) so the control board can adjust cycles
• Helps eliminate cycle problems caused by faulty or intermittent sensor readings
• Commonly associated with symptoms like incorrect cycle behavior, error codes related to sensing, or inconsistent performance
• Works as the factory-designed sensing input for the appliance control system

• One sensor/sensing element as shown

• Disconnect power to the appliance before attempting service to avoid shock or injury
• Handle the sensor and connector carefully to avoid damage to terminals or wiring
• Reconnect wiring exactly as removed; ensure secure connector seating before testing