Washer Clock Timer Motor Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10677715
Washer won't spin or agitate? A failed drive motor is often the cause. This motor assembly restores drum rotation and agitation for reliable washing.
More
$169.71
- Compare At:
-
$210.22
- You Save:
-
$40.51
Genuine Speed Queen part
By: Speed Queen
Part Number: 205076P
Washer won't start or advance through cycles? This control board assembly restores cycle selection and timing. Moderate DIY repair for 4-cycle models.
More
$110.50
- Compare At:
-
$130.39
- You Save:
-
$19.89
Genuine Whirlpool part
By: Whirlpool
Part Number: W11195971
Washer won't agitate or spin? This motor stator generates the magnetic field that drives the washer motor. Restores proper agitation and spin cycles.
More
$132.52
- Compare At:
-
$156.37
- You Save:
-
$23.85
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3955340
If your washer won't advance through cycles or stops mid-wash, the timer may be faulty. This control sequences fill, wash, drain, and spin stages.
More
$200.95
- Compare At:
-
$239.13
- You Save:
-
$38.18
Genuine Frigidaire part
By: Frigidaire
Part Number: 137006085
Washer won't start, powers off mid-cycle, or shows error codes? The electronic control board manages all cycles and components. DIY repair in 30-45 minutes.
Do-It-Yourself Stories from Customers like You
E43 error code washer was shutting off before spin cycle Christopher H. • Richmoind , ME • April 22, 2017
About a year ago, the washer was doing a similar thing, where it would shut off before the spin cycle started. The coin trap was completely clogged then, so I checked it first this time. It was clear, so I took the drain pump out and checked that as well. Nothing seemed to be physically wrong with the machine, so I put it in diagnostic mode, which gave me error code 43 when I tried the spin cycle. This one of the codes for a bad control board.
Replacing the board only took about 15 minutes....
Read more
More
$270.95
- Compare At:
-
$322.43
- You Save:
-
$51.48
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10476828
Dryer stops early on auto cycle but works on timed? The moisture sensor control board monitors dryness levels. DIY-friendly repair, 15-20 minutes.
Do-It-Yourself Stories from Customers like You
Kenmore elite dryer routinely stopped after a few minutes when set on the moisture cycle but finished completely when set on timed cycle James L. • Brandywine , MD • December 06, 2014
Did some research via the internet and figured the problem was likely the moisture control board. Watched a video of the repair of a similar unit in order to locate the moisture control board. Used the chat feature with one of the Appliance Parts Pros to get a schematic of the dryer and advice about where to use the putty knife to release the springs for access to the board. Thanks to the lady I chatted with for expert advice. Once the actual task was started, the repair took 15 or 20...
Read more
More
$189.77
- Compare At:
-
$213.76
- You Save:
-
$23.99
Genuine Whirlpool part
By: Whirlpool
Part Number: W10836348
Fix a washer that won't spin or agitate with a new drive motor. Common causes include F7 error codes or whining noises. Moderate DIY repair with video guide.
Do-It-Yourself Stories from Customers like You
F7 E5 F7 E6 Maytag washer wasn't starting past sensing and wouldn't' spin at all Andrew Z. • Desert Hot Springs , CA • September 08, 2018
Figured out how to diagnose it and found the error codes, all online! learned how disconnect everthing and laid the washer down on its back, saw the 2 malfunctioning pieces, The Drive motor and the shift actuator, removed them and looked up model numbers, found the parts I need here on appliance parts pros and was able to order them and have them delivered in 2 days. Super awesome as it took me maybe 5 minutes attaching everything back to where it went. I ran diagnostics again to see if there...
Read more
More
$188.71
- Compare At:
-
$229.22
- You Save:
-
$40.51
Genuine Frigidaire part
By: Frigidaire
Part Number: 134640601
Fix a washer that won't start, shows error codes, or won't advance cycles. This electronic control board manages timing and power to components.
Do-It-Yourself Stories from Customers like You
My electrolux front loading washer wouldn't complete a cycle and kept displaying error codes Mark D. • Chattanooga , TN • October 26, 2015
Appliance Parts Pros website helped me determine what part I needed according to the Error code number. I watched the how to video on the website and ordered the electronic control board. The item arrived in just two days! Replacing the board took literally 10 minutes, and the washer now runs flawlessly.
Read more
More
$231.95
- Compare At:
-
$276.02
- You Save:
-
$44.07
Genuine Frigidaire part
By: Frigidaire
Part Number: 134883600
Fix a washer that won't advance through cycles or gets stuck washing or spinning. This control timer regulates cycle progression. Moderate DIY repair.
Do-It-Yourself Stories from Customers like You
Timer on washer Robert W. • Dallas , TX • November 14, 2016
SELF REPAIR, WITH A VIDEO EXAMPLE.
Read more
More
$223.62
- Compare At:
-
$266.11
- You Save:
-
$42.49
Genuine Frigidaire part
By: Frigidaire
Part Number: 137006060
Fix a washer that won't spin, shows error codes, or has unresponsive controls. This main control board coordinates all cycles and functions. DIY-friendly.
Do-It-Yourself Stories from Customers like You
Error code e90 Thomas M. • Janesville , WI • October 07, 2016
I ordered the control board because the old one had many (about 30) opens on the back of the control board and the plastic cover for it was warped. Helpful notes; put front cover on before you connect the wiring. This will save you hours of being mad! All the plugins have different ends, you can't screw it up! Third note, those little plastic light transmitters can be put in wrong and it will not go together. Tabs go in! The one set by the start button can be put in backwards and looks correct....
Read more
More
$232.95
- Compare At:
-
$279.54
- You Save:
-
$46.59
Genuine Frigidaire part
By: Frigidaire
Part Number: 137208014NH
Washer won't start, shows error codes, or cycles incorrectly? The control board manages all wash cycles and safety functions. Moderate DIY repair.
Do-It-Yourself Stories from Customers like You
E53 error code Susan R. • Beverly Hills , FL • March 03, 2017
After taking the top off the washer I found the Tech Data Sheet ( for repair person ) The E53 code was listed as Low Voltage to the motor board and referred me to test #15. Which stated to check the "drum water NTC" ( Negative Temperature Coefficient or Thermistor). What was misleading was that there are 2 NTC's. If your washer has a "Sanitize" feature , then there is a drum water NTC as well as one on the fill valve body. IF you have the sanitize feature then you need to replace the drum water...
Read more
More
$221.30
- Compare At:
-
$265.56
- You Save:
-
$44.26
Genuine Frigidaire part
By: Frigidaire
Part Number: 131276200
This is the main drive motor that powers the agitation and spin cycles in a washing machine. It connects to the transmission and drum assembly to rotate the wash basket during operation. Replace this motor if the washer won't agitate or spin, makes loud humming or grinding noises during cycles, or trips the circuit breaker when running.
Do-It-Yourself Stories from Customers like You
No rotation of drum Donald H. • Riverside , IA • July 19, 2014
Found bad motor, Not able to repair so ordered new. Came supper fast and was able to install in about 30 minutes. Only needed a square drive #2 scewerdriver and 5/16" socket wrench to do the job. Verry easy.
Read more
More
$242.40
- Compare At:
-
$290.88
- You Save:
-
$48.48
Genuine Frigidaire part
By: Frigidaire
Part Number: 137005005
If your washer won't start, keeps beeping, or shows error codes, the control board may have failed. This computer manages all washer functions.
Do-It-Yourself Stories from Customers like You
Washer kept beeping and wouldn't start Gloria O. • Brownsville , TX • July 30, 2016
Changed the control board
Read more
More
$214.95
- Compare At:
-
$255.79
- You Save:
-
$40.84
Genuine Speed Queen part
By: Speed Queen
Part Number: 37922P
If your washer won't advance through cycles automatically and you must turn the knob manually, the timer likely failed. Moderate DIY repair restores function.
Do-It-Yourself Stories from Customers like You
Timer motor going out on my old amana washer Michael R. • Watsonville , CA • July 26, 2015
My mom loves her old Amana washer and AppliancePartsPros.com was the only place that had the part. Replacing the timer is an easy task but I had my repair guy put it in anyway. Some of the screws on the outside cover were so old we cut or used pliers to get them out. Washer is working great. Also ordered my part and got it the next day.
Read more
More
$315.25
- Compare At:
-
$375.15
- You Save:
-
$59.90
Genuine Whirlpool part
By: Whirlpool
Part Number: W10480261
Fix washer won't start, stops mid-cycle, or skips rinse with this electronic control board. Moderate DIY repair with connector-based installation.
More
$223.51
- Compare At:
-
$224.85
- You Save:
-
$1.34
Genuine Ge part
By: Ge
Part Number: WH03X32138
If your washer shakes excessively or stops mid-cycle, the accelerometer sensor may be faulty. This part monitors vibration levels to regulate spin speed.
More
$48.42
- Compare At:
-
$57.62
- You Save:
-
$9.20