Washer Dryer Combo Waste Small Engine Float Bowl Gasket Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: 280114
Seals the drum perimeter to prevent abrasion and maintain temperature. Replace when worn, torn, or causing marks on clothes. Verify fit by model number.
Do-It-Yourself Stories from Customers like You
Dryer squealed when first started & my wife noticed a piece of clothing getting caught in front seal Dale M. • Peshtigo , WI • January 02, 2018
Maytag Gas Dryer Model: MGDE300VW1
I had previous experience with repairing my dryers, but this was a first for this model. Instructional videos very helpful. Ordered necessary parts and they were delivered with-in two days. Wow!
Squeak found to be coming from idler pulley roller which no longer turned freely . The four other cabinet rollers had signs of wear. Dryer belt had frayed edges and a couple of burn spots in the belt from the motor turning before the drum did. Cleaned up all shafts...
Read more
More
Genuine Lg part
By: Lg
Part Number: 4036ER2004A
Seals between inner and outer tubs to prevent water leaks during wash cycles. Replace if you notice leaks or after bearing replacement. Verify fit.
Do-It-Yourself Stories from Customers like You
Noisy bearings Gerald D. • Belle Vernon , PA • October 18, 2014
Repair went fairly smoothly by following the EXCELLENT how-to video provided. I had only a few issues and suggestions. 1. Because many of the screws and fasteners are of multiple sizes, I would recommend laying them out in a muffin tray or on a paper with labels for where they go back. 2. After removing the weights and prepping to remove the shock absorbers, after the front ones were removed, the tub tilted so far the rear shock absorber separated. The friction pads fell out. It was easy...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10814296
Seals the center post/agitator shaft to prevent water leaks during wash cycles. Replace if you notice pooling water under your washer. Confirm fit with your model.
Do-It-Yourself Stories from Customers like You
Whirlpool lsr7233eq0 washing machine was leaking out the bottom Jerald F. • Laud Lakes , FL • April 05, 2015
I had previously replaced the pump about 1 year ago. That was not the problem. Still leaked the same way - intermittently, but always in the center of the washer onto the floor. None of the hoses were leaking - no evidence of corrosion or water mineral residue at any of the hose fittings. So, it must have been something else. I studied the parts diagram for the washer tub assembly and concluded the source of the leak almost had to be the outer tub's Centerpost Gasket. It was really the...
Read more
More
Genuine Lg part
By: Lg
Part Number: 4036ER4001B
The Washer Gasket is an OEM replacement part for LG washing machines. It is a flexible seal that lines the opening of the washer tub, creating an airtight barrier to prevent water leaks and ensure proper containment during the wash and spin cycles.
Symptoms of a bad washer gasket include:
- Water leaking from the front of the washing machine
- Excessive moisture or condensation buildup around the gasket area
- Difficulty in properly closing and latching the washer door due to a worn or damaged gasket
Causes of a washer gasket failure can range from general wear and tear over time, to physical damage from being pinched or cracked, to improper installation or alignment issues.
This OEM LG part is also compatible with Sears/Kenmore models.
Do-It-Yourself Stories from Customers like You
Noisy bearings Gerald D. • Belle Vernon , PA • October 18, 2014
Repair went fairly smoothly by following the EXCELLENT how-to video provided. I had only a few issues and suggestions. 1. Because many of the screws and fasteners are of multiple sizes, I would recommend laying them out in a muffin tray or on a paper with labels for where they go back. 2. After removing the weights and prepping to remove the shock absorbers, after the front ones were removed, the tub tilted so far the rear shock absorber separated. The friction pads fell out. It was easy...
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303937183
Seals the gap between drum and front panel to prevent air leakage and clothes snagging. Replace if worn, torn, or causing thumping noise. Verify fit.
Do-It-Yourself Stories from Customers like You
Constant beeping no heat Amy N. • Pike Road , AL • March 27, 2018
My 12 year old Frigidaire stack on top dryer had been beeping distress messages in some unintelligible code for about a year when it completely stopped producing heat. It also had a long standing issue with delicate fabrics and thin straps or drawstrings getting caught in the drum. After using this site to troubleshoot and viewing the useful how-to videos, I ordered and replaced the heating element, thermal limiter, and felt seals. Based on others' stories, I decided to also replace the rear...
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 134417000
The Dryer Seal is an OEM replacment part for Frigidaire dryers. It is located at the doorway opening where the drum rotates and helps prevent lint, moisture, and heat from escaping. The seal is a crucial component that ensures efficient drying and heat retention within the dryer drum.
Causes of a bad seal can include wear and tear over time from continuous use or damage due to mishandling. The nylon seal experiences a lot of friction and heat stress with each drying cycle.
Symptoms of a bad seal include:
- Increased drying time as heat escapes
- Excess lint and moisture accumulation inside dryer components
- Visibly worn or cracked seal edges
- Cool air leakage noticed around the door when the dryer is running
This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Felt/nylon "bearing" felt glide assembly for dryer drum front end support had worn nearly completely away Harlan D. • Warrenville , IL • November 19, 2014
Get some acetone at a Hardware Store before you start. A pint will do. Unplug the dryer from 110 VAC. Pull the top off of the dryer, by lifting it from the front first. It is attached with snap metal fittings. Do not completely remove the top, just tip upright to gain access to the front interior of the dryer. Before you pull any wires from the door switch, record which color wires go to which terminals on the door switch. If you reassemble the connections incorrectly, the gas value will...
Read more
More
Genuine Ge part
By: Ge
Part Number: WH08X24594
Seals the gap between outer tub and wash basket to prevent leaks. Replace if water leaks from bottom during wash cycles. Confirm fit by model number.
Do-It-Yourself Stories from Customers like You
Water leaking from bottom of washing machine Alex P. • Coram , NY • July 25, 2015
I will say that the GE Washer/Dryer combo is nice if you need to save space, but trying to fix it was far from "fun". It took several hours to get to the location of the Seal Tub. First the dryer had to come off the top, then pretty much every bit of the internals needed to come out too, The seal could not be accessed from the bottom of the machine, and it wasn't easy to get to it from the top. If you have patience, and keep track of everything you did, so you can undo it, the project can be...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 12002022
Lip seal kit protects washer tub bearings from water and detergent leaks. Replace when bearings are serviced or if black grease appears. Confirm fit.
Do-It-Yourself Stories from Customers like You
Noisy spin cycle Gregory E. • Halifax , PA • April 17, 2017
I just wanted to put my experience here for all to see. I have a Maytag Neptune, MAH5500BWW, one of the original ones. I bought it back in 2002 and it has done many many loads of wash faithfully. So when the bearings started to get loud I thought it best to replace them, the seal kit and the belt. I did my research as best I could and decided to order the OEM parts from an appliance supplier. If you are replacing the bearings, watch on line videos prior to performing the job. It will...
Read more
More
Genuine Lg part
By: Lg
Part Number: 4738ER2002A
The Vent Hose is an OEM part for LG washing machines. This hose is essential for ensuring proper ventilation within the washer, allowing air to circulate and preventing the buildup of moisture and mildew. It helps maintain the efficiency of the washing machine by facilitating the expulsion of air and excess water vapor during operation.
Causes of a bad washer vent hose can include wear and tear over time, blockages from lint or debris, or damage due to bending or pinching.
Symptoms of a bad vent hose include:
- Excessive moisture or condensation inside the washer
- Musty odors from the washing machine
- Visible cracks or holes in the hose
- Poor ventilation leading to inefficient washing cycles
This OEM LG part is also compatible with Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
Water leaking from my front load washing machine Donald H. • Tustin , CA • July 03, 2015
Removed the top cover while the machine was operating, located the source of the leak. The top filler tube had worn a hole in a flex point. Found the right part on this site, replaced it with little effort. While in there I saw a similar hose and decided to replace it as its time was probably up too. So far so good, washing clothes and no leaks!! Great prices and best of all the right parts were delivered in a timely manner. Thanks for making this so easy. Only specialty tool used was hose...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 285352
Prevents oil leaks from your washer's gearcase and keeps internal components lubricated. Replace if you notice oil pooling under the machine.
Do-It-Yourself Stories from Customers like You
Not spinning clothes dry Marjorie S. • Lansing , NC • December 16, 2017
Replaced clutch assembly, gearcase input shaft seal and motor coupler. When I disassembled the washer I realized the shaft seal on the top of the gearcase was leaking and not the input shaft seal. So had to order more parts before I could finish this job. Altogether I replaced agitator dogs, both seals on the gearcase, the clutch assembly and the motor coupler.
Agitator dogs replacement is a very easy job, no tools required, takes less that 5 minutes and made a huge difference with how well...
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303937187
Prevents leaks and seals your washer door during wash cycles. Replace if torn, moldy, or causing water leakage. Verify fit with your model number.
Do-It-Yourself Stories from Customers like You
There was a strong smell of mold coming from the door boot. Thomas H. • Netcong , NJ • June 12, 2022
I replaced the door boot with a new one from AppliancePartsPros.com. The most difficult part was starting at the back end of the new boot onto the stationary rim, just in front of the tub. And then anchoring it in place with the existing spring from the previous boot. To start the boot I had to hook the top edge of the boot, where the arrow tab is, onto the rectangular projection on the tub rim and then roll the rubber boot edge down around the tub rim and hope the rim was going into the...
Read more
More
Genuine Ge part
By: Ge
Part Number: WE9M58
The Door Gasket is an OEM part for GE dryers. This seal prevents hot air from escaping during a cycle, ensuring that the dryer operates efficiently and safely. The gasket's primary role is to maintain the internal temperature and airflow, which are essential for the drying process.
Causes of damage to the door gasket often involve regular wear and tear from opening and closing the dryer door.
Symptoms of a bad Door Gasket include:
- Clothes taking longer to dry or not drying fully due to heat escaping from the dryer.
- An increase in energy consumption as the dryer works harder to maintain the required temperature.
- Visible wear, tears, or gaps in the gasket
- Heat leakage from around the dryer door
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 134146100
Seals front and rear tub halves to prevent water leaks. Replace if you notice leaking during wash cycles or after bearing repair. Verify fit with your model.
Do-It-Yourself Stories from Customers like You
Very noisy then ultimately bearing failure and a broken shock mount Brian B. • Canton , NY • September 23, 2014
I watched the video posted by Jerrod Sessler on yellow van handyman.com. Then I had to unstack the dryer from the washer, remove all covers, disconnect all hose connections, shock mounts and springs and remove the tub assembly. Then I disassembled the tub assembly and remove seal and both bearings from the rear half. At this point I cleaned everything. I installed new bearings and seal, installed the basket and assembled both tub halves using a new gasket and silicone, and reinstalled the...
Read more
More
Genuine Ge part
By: Ge
Part Number: WE9M59
Seals the lower dryer door to prevent heat loss and ensure efficient drying. Replace if worn, cracked, or air is escaping. Verify fit with your model.
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 131295200
This air duct seal creates a tight barrier between the dryer's lint housing and cabinet. Replacing a worn seal helps prevent air leaks, maintain proper airflow through the lint filter, and restore consistent drying performance.
- Seals the air duct/lint housing to the front panel to direct airflow through the lint screen and drum
- Helps maintain dryer efficiency and temperature control by preventing bypass air leaks
- Common symptoms of a failed seal include longer dry times, weak exhaust airflow, excess lint inside the cabinet, or lint around the door opening
- Replaces a deteriorated or missing seal to restore the intended air path
What's included: 1 air duct seal Install notes:
- Disconnect power; shut off gas supply for gas models
- Access the air duct by removing the lint screen and top/front panels as needed
- Remove the old seal and any residue; clean mating surfaces before installing the new seal
- Seat the duct evenly against the panel when reassembling to ensure a uniform seal
Do-It-Yourself Stories from Customers like You
Grinding noise coming from stack unit dryer Daniel B. • Hughesville , PA • August 22, 2023
Old, unused stack set. Washer was great, dryer was grinding. Started with the mounting bracket/bearing and the belt. The old ones were slightly beatup. Put it back together and the problem persisted. Found the real problem when I pulled apart the blower to get to the motor. The fan had broken fins that had jammed in the side of the blower housing, and the friction had melted through the outer wall of the fan. Got the blower housing from APP, got the fan from a competitors for $30 less. When it...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 8066094
Replacement dryer seal creates a tight barrier between components to prevent leaks and lint buildup. Replace when worn or brittle to stop drips. Verify fit.
Do-It-Yourself Stories from Customers like You
Seals were leaking and roller had broken Frederick M. • Louisville , KY • February 15, 2019
Seals on the exhaust were one issue that needed fixing since lint was found inside the cabinet. A roller that holds the drum in place had broken off. And, the drive belt was aged and needed to be replaced as a maintenance item. The only issue I had was with shipment. I ordered overnight shipping but got two crucial item two days later. No communication from AppliancePartsPros.com as to why this was late, though, I paid for faster shipping.
Read more
More