Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Center wash arm assembly for dishwashers. Mounts on the center rack area to spray water during wash cycles. Replace if holes are clogged or arm won't rotate.
The replacement of the arm took a total of 3 minutes, all I needed was a nut driver for the easy job, taking the old arm out and putting the new one in, exact replacement , I appreciate you getting the part out as fast as you did. It took an extra day because of the ice storm we had . That was ok. Thanks you . Read more
This water collection chamber sits at the bottom of the dishwasher tub and houses the wash pump and drain components. It collects wash water and directs it through the cleaning system during cycles. Replace this sump if you notice water leaking from the dishwasher bottom or poor wash performance due to water circulation problems.
The main conduit was broken and the pump connector had a hole in it. The pump also was showing signs of leaking. I completely disassembled the dishwasher cleaned everything and reassembled. The repair videos are a big help. Thank you. Read more
Replaces a cracked, broken, or clogged lower spray arm in your dishwasher. Installs at the bottom of the tub. Needed when spray holes are blocked or damaged.
I replaced a few key parts that I couldn't clean properly, and were not spinning well in the dishwasher. Afterwards, it worked like new, and the cleaning power returned. Read more
Prevents leaks by sealing the bottom of your dishwasher door. Replace if water leaks during cycles or rubber shows wear. Verify fit with your model number.
All parts arrived in one box - I purchased the tub gasket, lower door gasket and lower door seal. My existing parts were visibly pretty worn out, dishwasher is 12 years old (maybe should have just bought anew one?). Tub gasket was pretty easy, it took me a while to make sure it was even all the way around, after attest run and the subsequent drying heat it fits nicely. Lower door seal went as video, all good, my other one was destroyed from the heat cycles. Could not get the lower door seal... Read more
Insulation blanket that wraps around the dishwasher tub to reduce noise and maintain temperature. Replace if damaged, torn, missing, or contaminated.
I pulled the DW out, pulled off the old blanket pieces, vacuumed up the millions of small parts, then put the new blanket on, I did use some packing tape to hold it in place. Easy! The challenge was moving the unit out, then back in, but that was simply time and a little effort. Read more
Replacement drain hose kit for dishwashers. Flexible tubing routes wastewater from the wash chamber to the pump outlet. Replace if cracked or leaking.
Our GE was installed about 8 years ago and was AWESOME for much of its early life. However, progressively its cleaning ability diminished. By replacing all the spray arms (clogged with debris), filters, drain hose, and sump...this dishwasher cleans like it did when it was new! Cost was around $100 (also replaced a wheel and the silverware basket) and labor was relatively simple. And to think...my mother-in-law said, "Wouldn't it just be easier to buy a new one?!?". Read more
Fix low spray pressure, growling noises, or leaks from the pump housing. This circulation pump assembly requires basic tools. Takes 1-2 hours to install.
I ordered a new motor through ApplianceParts Pros.com and had the new part within 5 days. The entire replacement took approximately 1 1/2 - 2 hours. The repair was relatively simple and straight forward. By doing the work myself I saved over $250. Originally a GE technician quoted a price of $489 to replace the motor to repair the dishwasher. For that price I could have bought a new dishwasher (Electronix Express $491) but not with all the features of my current appliance. By doing the... Read more
Fix dishwasher leaking from pump housing with this impeller & seal kit. Repairs worn seals causing water leaks. DIY-friendly, typically 30 minutes.
Replaced pump impeller. Read more
The screw is an OEM replacement component for GE dishwashers. It is used to securely fasten parts inside the dishwasher tub assembly.
Causes of a damaged or defective screw usually involve wear from continuous mechanical stresses and vibration during dishwasher usage. Loose parts affect machine balance and performance.
Symptoms of a compromised screw placement include:
This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
The Check Valve Flapper is an OEM replacement part for GE dishwashers. It is a small but crucial component located within the water inlet valve assembly. The check valve flapper regulates water flow into the dishwasher, allowing water to enter during the fill cycles but preventing backflow when the water is drained.
Causes of a bad check valve flapper can include wear and tear over time, mineral buildup that causes sticking, or damage to the flapper itself. This prevents the flapper from opening and closing as intended.
Symptoms of a bad check valve flapper include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore dishwasher models.
Pulled dishwasher from the cabinet and flipped onto its side. Easy access to sump and drain flapper valve that I also replaced. Rubber sump coming apart into soft pills & chunks and plugging spray arms. Better now but it's rediculous that GE would make components that dissolve this way. Read more
Dishwasher not draining or water pooling at bottom? This drain pump assembly removes water during the drain cycle. DIY repair in about 45 minutes.
Replaced the pump drain assembly Read more
Replacement spring for dishwasher door latch mechanism. Provides tension to keep plunger engaged. Replace if broken, lost, or stretched during repair.
First off OUTSTANDING experience with AppliancePartsPros.com! Ordered my parts on Tuesday and they arrived Wed morning!! Replaced interlock switch plunger and spring, which was obviously broken compared to the new one. This solved the problem of my door not latching but the machine would still not turn on. So with two interlock switches on the door, one had to be bad. So decided to start by replacing one switch at a time until I found the bad one. If both were bad I would just buy a... Read more
Specs: B-16 HXW 1/2 SS
Replacement slide rail for dishwasher upper rack. Installs on cabinet wall to guide rack in and out. Needed when original is bent, twisted, or broken.
Dishwasher needed new wheel that mounted to upper rack.There are 4 total that make the rack roll in and out. Replaced both side rails and rail caps (4- only 50 cents each) along with new upper rack that came with wheels installed. One side rail was bent so decided to spend a little extra and replace both. Might of been able to replace just one broken rack wheel but rack was old and was rusting in some areas so decided to just replace it. Read more
Mounts the mid-level spray arm to its supply tube. Replace if cracked, worn, or broken to keep the spray arm centered and spinning freely on the rack.
The middle sprayer sheared off our GE Power 3 dishwasher, ruining the hub in the process. We removed the rack from the dishwasher to make it easier to access the sprayer hub, otherwise it's awkward. The biggest challenge was finding the right tool in our garage (we used a 1/4" wrench as we did not have the right socket size). Once the screw was removed, it was quite easy to remove the hub and attach the new one. The rest was simply attaching the new sprayer to the hub using the included... Read more
Includes screws.
Replaced the upper rollers and the rack rollers along with new caps for the slide bars. Everything fit perfectly and it fixed the problem. A bit pricey but cheaper than a new dishwasher plus installation Read more