66516319101 Parts

• Noisy
• Will not drain

I had previously disassemble the pump assembly to find what I at first thought was an oddly shaped spring, which it was. What I learned by researching the parts was that the spring's odd shape was a result of something having gotten caught in the pump and jamming the impeller. After ordering the parts, I watched the "repair video" a few time and proceeded to remove and replaced the affected parts. Reassembly went pretty much as described with the one small glitch being the seating of the new... Read more

My discharge would not empty after a wash cycle and I always had gross gray water left in the bottom approx 3" deep? After doing the obvious things of checking the simp for garbage, and checking that the discharge hose wasn't blocked, I removed my discharge pump ( not too hard to do) and tested. My pump which did run and turn the impeller. However, the pump evidently had weakened with time and weakened and could no longer pump the waste water up hill to the "T" connection under the sink. A... Read more

Replaced upper and lower spray arms, plus nylon bearings. Read more

I watched a video on how to change these. I had ordered one a month ago because one had failed. I had no trouble --less than 30 seconds -- to insert a new for the bad one. Then a few weeks later, a 2nd one failed -- there are 4 of them -- and I figured that I might as well change out the bad one as well as the two "good" original ones. Total time to change out the 3 was less than two minutes and that included getting the rack completely out of the dishwasher...which you have to do in... Read more

My dishwasher was running super loud for several loads but appeared to be cleaning just fine. One day it went from super loud to hardly a sound at all, not even the sound of water. After finding this site I found others with similar issues and it pointed to the Circulation Motor. Normally I wouldn't feel comfortable with pulling the dishwasher out of it's slot and performing this type repair but after watching the video posted along side the pictures of the part it looked pretty easy so I took... Read more

Dishwasher washer would not drain after hearing glass-like particles during the drain cycle despite trying to clean the cylinder filter. Originally suspected the drain motor was damaged. After watching a video on how to replace the drain pump, I carefully energized the dishwasher (from water and electricity) then removed the dishwasher to take a look. After removal of drain hose from the pump, discovered that drain hose was connected to water inlet assembly which also needed removal to... Read more

• Will not fill with water

First I cleared the food chopper area. There were things there, bits of plastic for instance, but it wasn't the reason for the dishes not getting sprayed off. The dishwasher continued to only partially fill and not circulate the water. I started the dishwasher, let the pump start and then opened the door and filled up the dishwasher manually. It sprayed water as it should, cleaning the top rack quite well. I figured the issue was not the float switch, since some water was coming in. So I... Read more

• Not cleaning dishes properly

Replaced upper and lower spray arms, plus nylon bearings. Read more

Replaced the upper spray arm seal Read more

Ordered 6 parts from you thanks to your fantastic web schematic parts diagram received parts very fast changed parts easily and that leak stopped. Your company is a 5* operation hands down. Read more

New door seal did the trick. Read more

• Will not dispense detergent

I ordered a new soap dispenser and began a new venture in repairing my dishwasher. I turned off the breaker that suppled power to the unit. I removed all the T-15 torx screws from the inside cover except one, which my wife helped me hold in. This prevents the cover from dropping off. Then, after removing those two, we closed the dishwasher cover, and lifted off the outside cover. That being off, I saw the two wires connecting the dishwasher dispenser solinoid. Removed them. Notice, that one... Read more

Order parts and replace. When removing attachments, do them one at a time and install them on new rack as you go. Watch for the small release tabs on the attachments (baskets, rollers and tine holders), "gently" put pressure to release; remember these units have been in hot water and they are brittle. Read more

Ordered new insulation from AppliancePartsPros. It was delivered quickly and easy to install. Read more

I called a local repair center who estimated $300+ to fix this. I bought a door handle and door latch for $~100 and fixed my dishwasher in about 10 mins. I ordered the parts on Sunday, they arrived on Tuesday. Very happy with appliance parts pros and would recommend them. Read more

Removed 8 hex screws and the cap to remove the broken threads...used needle nosed pliers for this, stuck them in and expanded them to put pressure on the thread sleeve from the inside, as threads were broken off below the edge. Replaced all very simply Read more