Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Ice maker stopped making ice or won't eject cubes? This complete assembly replaces a faulty unit. DIY-friendly repair, typically 10-15 minutes to install.
Replaced ice maker. The hardest part was getting to the power plug behind the ice maker to remove and replace it. Once the new ice maker was installed it started making ice again. Read more
Controls ice dispenser door opening and closing. Replace if door won't open, stays open, or motor makes no sound when dispensing. Mounts behind dispenser trim.
Unplug refrigerator. Use non marring (plastic trim stick) tool to gently pry loose the plastic assembly containing the PCB display beginning at the lower edge and proceeding around the outer edge. Disconnect all connectors and note the routing of each wire harness and connector (take pictures on cellphone as necessary). Remove two screws holding inner PCB mount bracket in place to expose actuator, flapper door and linkage. Replace actuator (three mounting screws) and ensure that actuator... Read more
Replaces the water supply tube connecting the inlet valve to the filter housing. Needed when the line is cracked, leaking, or broken. Installs at rear.
First, water and electricity don't mix, so make sure to unplug your refrigerator before beginning this repair - it shouldn't take more than an hour, so you shouldn't have to worry about spoilage. My water dispenser began making a hissing sound from the back of the fridge when you pressed the dispenser. Upon inspection, I discovered the 1/4" feed line into the filter housing assembly had cracked. I ordered the 1/4" feed and 5/16" return lines, figuring to replace the return line while I was back... Read more
Water supply tube that connects your refrigerator to the household water line. Replace if cracked, brittle, leaking, or damaged to restore water flow.
No water from dispenser or ice maker? This water inlet valve controls flow to both. DIY-friendly repair—takes about 15 minutes with basic tools.
I viewed the self help video on You Tube and checked the water pressure first. Once the water pressure was determined to be fine I ordered a new water inlet valve as recommended from the video. LG supplier did not have the recommended part and after checking on-line I found Appliance Parts Pros had just what I needed. The video from Appliance Plus Pros showed step by step on how to replace the water inlet valve. It took me approximately 15 minutes to remove the old one and install the new one.... Read more
Replaces cracked, broken, or worn ice chute door in your refrigerator's dispenser. Controls ice release when dispensing. Includes installation video.
The ice chute flap wasnt closing. 1. I turned off power 2, Pulled off facia around controls on freezer door,, you have to pull out the bottom part of the chute first , its clipped in 3. Disconnected the front panel 4. Unscrewed the next panel to allow access to the chute flap 5. Removed 1 screw holding complete flap and mechanism and replaced with new 6. Re installed all parts in reverse Problem was the chute flap had worn and was folding over on top edge when opened and then wouldnt return... Read more
Reduces sediment and particulates to improve water quality and protect your refrigerator. Replace every 6 months for optimal performance and taste.
I replaced the water filter. Thank you very much. You sent me the right filter. Read more
Ice maker not filling or water dispenser stopped working? This water inlet valve controls water flow to both systems. DIY-friendly repair for most users.
Once I was convinced that the water supply and filter wasn't the problem, I took the back protective panel and looked at the valve assembly. It looked corroded, especially on top where the ?pistons for the solenoids?would project into. I ordered the part and it was on my doorstep in TWO days...really fast. The part was slightly different from the one that I was replacing in that the part was "angled out." This was not a problem. All that did was tilt the fitting for the copper water line... Read more
Replaces cracked, leaking, or damaged water tank that stores and supplies water to your refrigerator's dispenser and ice maker. Direct fit replacement.
I replaced to offending part. The only minor issue was that the replacement part had changed design from the original. Otherwise it was a pretty straight forward operation. Read more
Replaces a worn or broken evaporator fan motor grommet in your refrigerator. Cushions the motor to reduce vibration and noise during operation.
Ordered parts, removed top tray in freezer, popped the back inside freezer panel out removed and replaced fan, dampers and fan housing. Took about 15 minutes. Read more
Replacement guide rail that supports and aligns refrigerator drawers for smooth sliding. Needed when original rail is cracked, broken, or split.
I googled around to find the part number, ordered the part and replaced it. I was initially advised to get a different piece than I had searched for. I was advised to get the "crisper drawer" rail handle instead of the "cheese drawer / snack pan" rail handle. The piece I was advised to get was wrong, but the company immediately fixed their mistake without any hassle or delay. The description of the part was also correct in that it did not contain a screw or wheel so I knew to salvage that from... Read more
Freezer not cold enough or making noise? This condenser fan motor draws air across coils to maintain proper cooling. Moderate DIY repair—requires removing back panel.
After noticing that the fan was not going on with the compressor, I used a small fan to cool the compressor until I got the new fan at which time I replaced the defective fan and the problem was solved. Read more
Replace your cracked, broken, or missing refrigerator door bin. This basket attaches to the interior door for storing bottles, jars, and containers.
Ordered replacement door basket and switched out cracked one, Read more
Lower hinge assembly supports and aligns your refrigerator door. Replace if cracked, broken, or worn causing misalignment or door sag. Installs at door bottom.
The left hinge works on the right side as well as the left. All you have to do is unscrew the little plastic post and move it to the other hole. So even though the web might say that the left hinge assembly is not compatible with your fridge, or that the right hinge assembly is no longer available, it will still work. The door stopper assembly worked just fine. All you have to do is screw it in to the bottom of the door. You will have to disassemble the top hinge (on top of the fridge) in... Read more
Plastic water supply tube that connects the main water line to your refrigerator's dispenser and ice maker. Replace if cracked, leaking, or damaged.
Replaced 3 water lines on rear of refrigerator. Read more
Cracked ice tray leaking water into your freezer? This ice cube tray replacement snaps into place in minutes. Easy DIY fix for most homeowners.
It was a snap. All I had to do was unsnap one end of where the ice tray attached to the ice maker and fit the tray into the two sides and then resnap the end back onto the icemaker. Very easy. Read more