Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Replacement lower spray arm assembly for dishwashers. Installs under the upper dish rack to distribute water during wash cycles. Needed when cracked or broken.
Note: Due to manufacturer changes, the spray arm no longer has the metal tips on the end of the spray arm. Per the manufacturer, it is no longer required.
Purchased new lower spray arm. counterclockwise wise turn to remove and clockwise turn to replace Read more
Fix H2O error codes and water fill issues with this dishwasher pressure sensor. Monitors water level for proper fill cycles. DIY repair in about 1 hour.
First diagnosed the problem by viewing several Youtube videos. Then ordered the part from AppliancePartsPros. After the part arrived I again referenced the best video - several times - and finally made the repair swapping out bad mother board with the new one from AppliancePartsPros. Saved me hundreds. Dishwasher works great, wife happy! All is good. Read more
Replaces broken or worn lower rack carriers and rollers. Installs on both sides of the dishwasher lower rack to restore smooth gliding along tracks.
I was able to find the parts on your website. I was a little worried because there were no photos, but the parts were correct, and it was an easy fix! Read more
This is the flexible rubber or vinyl gasket that lines the opening of your dishwasher tub, creating a watertight seal when the door is closed during a wash cycle. It prevents water from leaking out around the door during operation. Replace it when you notice water pooling on the floor in front of your dishwasher, or when the gasket is visibly torn, stiff, or pulled away from the tub.
Upon taking the door apart it looked like the leak was coming from the vent so I replaced the vent cap, vent seal and the transition piece. I did not have to change the seals. It took me a while to figure out how to get the door apart, but once I did, it was fairly straightforward. Read more
If your dishwasher won't drain or has standing water, this drain pump removes water at the end of each cycle. Moderate DIY repair, 30-60 minutes.
Removed kick plate , slowly took my time to diagnose area where intermittent noise coming from sump area. Could feel when the circulation pump was running it was quiet. When the drain cycle occurred the noise momentarily began. Ordered a drain pump. After removing the old one I discovered a broken tooth pick in the drain impeller area. Replaced the drain pump anyway. All is quiet!! Read more
Replace your dishwasher's middle spray arm if it's cracked, broken, or worn. Snaps into place in the mid-rack section. Tool-free installation.
Twist and popped right off and new one went in place just perfect. Was very easy to fix. Read more
The Lower Rack Roller is an OEM replacement part for GE dishwashers. This small but crucial component allows for smooth and effortless movement of the lower dish rack during loading and unloading.
Symptoms of needing to replace the lower rack roller include:
Causes of a faulty lower rack roller can include normal wear and tear over time, exposure to heat or moisture, or physical damage due to impact or mishandling.
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore dishwasher models.
Fix dishwasher not filling or H2O error codes with this water inlet valve assembly. Controls water flow into tub. Moderate DIY repair, about 1 hour.
It was one of 3 things basically, motherboard, pressure sensor or fill valve. I tried cleaning the pressure sensor to no avail. I proceeded to replace both the valve and the sensor because the parts were very inexpensive and the cost of a motherboard wasn't worth it. I completed the repair in about 1 hour and have ran it twice without incident . Read more
Prevents water leaks around the dishwasher door during wash cycles. Replace if you notice water pooling at the bottom. Confirm fit with your model number.
I looked at the diagram on Appliance Parts Pros and found the part that was broken and I added it to my cart. I realized that they also had the gasket that goes around the door and remembered that it leaks sometimes, so I put that in my cart as well. My wife reminded me that the hinge on the right side was rusty so I added that to my cart. For just over $1 with tax and shipping I was able to refurbish our dishwasher for less than 10% of what it would cost to replace. I watched a few YouTube... Read more
Dishwasher won't start or only runs when you lean on the door? The door latch secures the door and signals when it's closed. DIY-friendly repair.
Replaced the latch Read more
The Folding Tine Row Clip is an OEM part for GE dishwashers. It is located on the side of the dishwasher's lower rack and holds the folding tine row securely in position. It ensures that the folding tines, which can be adjusted to accommodate different dish sizes, remain stable during the wash cycle.
Causes of a faulty or damaged folding tine row clip can include regular use, wear and tear, or breakage. These factors can result in issues such as the folding tine row becoming loose or unstable, difficulty in adjusting the tines, or the tines not staying in the desired position.
Symptoms of a bad folding tine row clip may include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Replaced all movable parts. Read more
Connects to the middle rack to deliver water through the mid-level spray system. Replace if tabs are broken, assembly won't lock in place, or seals are worn.
Replaced part and fixed the dishwasher. Read more
The Door Latch Strike is an OEM part for GE dishwashers. It ensures the dishwasher door latches securely, allowing the appliance to operate only when the door is properly closed.
Causes of a bad door latch strike can include wear and tear from regular use, damage from slamming the door, or misalignment due to repeated opening and closing.
Symptoms of a bad door latch strike include:
Based on our research, the dishwasher latch was one of the most common causes for our model of dishwasher malfunctioning. We purchased this replacement unit, and thanks to the help provided via videos and diagrams, my wife and I were able to very easily install the new latch. While this replacement did not totally fix our problem, it was part of it. Shipping on the part was very quick, I ordered it on Friday night, and the latch arrived Saturday morning. Read more
Replacement drain hose for dishwashers. Carries wastewater from the unit to your household drain. Needed when original hose is cracked, leaking, or damaged.
Replaced drain line Read more
Secures your dishwasher to the underside of the countertop for stability. Replace this bracket if it's cracked, broken, or missing to prevent movement.
Dishwasher not dispensing detergent or dishes coming out dirty? This detergent dispenser module controls detergent release timing during wash cycles.
Replaced soap holder Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.