Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Microwave tripping breaker or won't start? A faulty door switch is often the cause. This safety switch ensures your microwave only runs when the door is closed.
Check fan operation and was OK. Everything else worked except when microwave was started for a cycle. I looked around on internet and found someone had trouble with the door switches. I started to check door switches and found one shorted. I replaced both lower door switches and it took care of problem. Read more
Microwave tripping breaker or won't start? A faulty door switch is often the cause. This safety switch detects door position. Moderate DIY repair.
Fix a microwave door that won't close or latch properly with this door latch assembly. Restores secure door closure. DIY repair in 10-15 minutes.
It took a long time to determine the problem but eventually I discovered that the plastic bracket (latch hook) that held the three door-switches showed appreciable wear from repeated door openings and closings. This wear stopped the door from sealing properly and the door switch safety mechanism blew the line fuse. I replaced the worn bracket (AP6230612) as well as the plastic latch mechanism (AP4553585) on the door that engages this bracket (and of course the fuse too) and the microwave now... Read more
Microwave won't start or is completely dead? This fuse protects against electrical overload. Requires disassembly to access. Often replace with switches.
After doing some research the problem appeared to be the door safety switches. I ordered 3 new ones to replace all the original ones. Some minor disassembly of the microwave front was required to reach the fuse and switches. To reach the switches the control panel wires needed to be unplugged and the panel removed. After doing that replacing the switches was pretty strait forward. As of this comment the microwave has worked for 5 days without blowing the fuse so far. This has probably fixed the... Read more
The Latch Hook is an OEM replacement part for Frigidaire microwaves. It is an internal component that helps securely latch and lock the microwave door during operation. The latch hook works with the door handle mechanism to ensure the door is properly fastened to prevent leaks of microwave energy and for safety.
Causes of a bad latch hook can include wear and tear over time, damage from repeated use of the door latch, or issues with the latch hook spring or connecting components.
Symptoms of a bad latch hook include:
This OEM Frigidaire replacement part is also compatible with Electrolux, Westinghouse, and Kelvinator microwaves.
Replacement light bulb for microwaves. Illuminates the interior and cooktop area. Replace when burned out or dim. Confirm fit with your model number.
Unplugged microwave, sprayed lightly with WD-40, grabbed rim with needle nose pliers and was then able to remove metal screw-in portion. Wiped out socket with rag, replaced bulb. Read more
The Whirlpool screw is an OEM replacement part responsible for securing various components or parts on different types of Whirlpool appliances. The screw is designed to provide a secure and reliable fastening connection, ensuring that different parts of the appliance stay in place. It is commonly used in different locations within the appliance, such as the cabinet, panels, or other structural elements. This part fixes the following symptoms:
The Whirlpool screw can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
One day my wife went to bake something and the bake/broil buttons as well as #3, #9, and oven light ceased to work. Local repair guy came by and wanted to charge $500 to fix it....YEAH RIGHT! Did a little homework and found this website, spoke with knowledgable staff who pointed me in the right direction. Took me all of about 20 minutes to install new control panel..everything works perfect...THANKS! p.s. In doing my research come to find Maytag did little to insulate control panel from oven... Read more
The Thermal Cut Off is an OEM part for Frigidaire microwaves. It is located inside the microwave cavity or near the magnetron tube. It is designed to monitor the temperature and interrupt the electrical current if it exceeds a safe limit. This prevents the microwave from overheating and potentially causing damage or hazards.
Causes of a faulty or damaged thermal cut off can include regular wear and tear, electrical malfunctions, or overheating due to excessive use or blocked airflow. These factors can result in issues such as the microwave not heating food properly, frequent shutdowns during operation, or complete failure to function.
Symptoms of a bad thermal cut off may include:
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
Traps grease and particles from cooking to protect microwave components and exhaust system. Replace when clogged or damaged. Verify fit with your model.
I found the manual online, shopped around for the filters and ordered them from Appliance Parts Pros.com. where I found the best price and quick delivery guarantee. They came in quickly and were easy to install. Read more
Rear wall mounting bracket that securely attaches your microwave to the wall or cabinetry. Replace if your original bracket is missing, cracked, or damaged.
Purchased wall plate from Appliance Parts Pros. Read more
Replaces cracked, burned, or missing waveguide cover in your microwave. Protects the magnetron opening from food splatter and moisture damage.
Ordered the part and popped it back in. Shipping was extremely fast. Read more
The Damper is an OEM part for Frigidaire microwaves. This part regulates airflow within the microwave, ensuring that steam and odors are properly vented out during cooking.
Causes of a bad damper can include wear and tear over time, buildup of grease and debris, or damage from high temperatures.
Symptoms of a bad Damper include:
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
We bought a house with an over-the-range microwave, which just recirculated air into our house--not effective for smoky meals! We removed the microwave and cut a hole to send the exhaust out the back of the microwave (and out of our house), but realized we were missing this damper and frame that go on the back of the microwave for rear exhaust. The parts fit perfectly and now we can enjoy a smoke-free kitchen! Read more
Controls airflow through your microwave's ventilation system. Installs at exhaust opening to prevent air backflow. Replace if cracked, missing, or damaged.
This door release lever connects the push-button to the latch assembly inside the microwave. Replacing a worn lever restores smooth, reliable door opening so the button works on the first press.
Support ring installs beneath the microwave turntable to provide stable, balanced rotation. Replace if cracked, broken, or missing for proper use.
I ordered a plate and support roller from you and it came within two days, unbelievable. My wife was very happy that now she could use her microwave again. The original plate broke. When it arrived I could not believe how well it was packed. You could have dropped it from the empire state bldg. in N Y and would not have broken. The gentleman I spoke with, Nathan I believe, is an excellent representative of your company. Very professional and personable. Thank You so much. You can be sure I will... Read more
Fix a microwave fan that won't shut off or overheating issues with this thermostat. Monitors temperature to prevent damage. Moderate DIY repair.